Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Jeyaraj, J.Subject: search.filters.subject.Composite materials

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Mechanical Properties of Natural Fiber Braided Yarn Woven Composite: Comparison with Conventional Yarn Woven Composite
    (Science Press bcanji@mail.sioc.ac.cn, 2017) RAJESH, M.; Jeyaraj, J.
    The effect of reinforcing natural fiber in the form of braided yarn woven fabric on mechanical properties of polymer composite was investigated. The results of braided yarn fabric composites were compared with the conventional yarn fabric composite and random oriented intimately mixed short fiber composites for the same percentage of fiber weight. The effect of intra-ply hybridization, by keeping two different natural fiber yarns along two different directions of a woven fabric, on mechanical properties of the woven fabric composite was also analyzed. Natural fiber braided yarn fabric reinforcement significantly increased the mechanical properties of the composites compared with that of the conventional woven fabric and short fiber reinforcements. Intra-ply hybridization of two different natural fibers improved the mechanical properties of the conventional woven fabric composite while it could not enhance the properties of the braided fabric composite. The improvement in impact property is very high compared to tensile and flexural properties due to the braided yarn fabric reinforcement. © 2017 Jilin University
  • No Thumbnail Available
    Item
    Structural optimization of rotating tapered laminated thick composite plates with ply drop-offs
    (Springer Netherlands, 2017) Edwin Sudhagar, P.; Arumugam, A.; Vasudevan, V.; Jeyaraj, J.
    In this study, structural optimization of rotating tapered thick laminated composite plates with ply drop-offs has been investigated numerically. The governing differential equations of motion of the tapered composite plate have been presented including the energy associated with the inertia force, coriolis force, displacement dependent centrifugal force and initial stress resultants due to steady state rotation. Four noded quadrilateral finite element has been formulated based on the first order shear deformation theory. Finite element analysis results are validated with experimental results for natural frequencies of the tapered plate with various configurations. Various cases of optimization problems are formulated with different objective functions in terms of maximization of natural frequencies and damping factors (individually and combined) and solved using genetic algorithm in order to obtain optimal ply sequence and ply orientation. It is shown that the optimization problem with maximization of fundamental modal damping factor without rotating condition yields the optimal layout as 90° for all the layers in the plate. It is also observed that maximization of the fundamental modal damping factor yields identical optimal orientation for uniform and all the configurations of a tapered composite plate. © 2015, Springer Science+Business Media Dordrecht.
  • No Thumbnail Available
    Item
    Study on tearing strength of woven sisal fabrics for tents and polymer composite applications
    (Taylor and Francis Ltd., 2023) Nagamadhu, M.; Kivade, S.B.; Jeyaraj, J.; Kumar, G.C.; Shivaraj, B.W.; Bharath, K.N.
    The use of plant fibers as a reinforcement in composites has increased daily owing to their favorable environmental considerations. Fabric properties play a significant role in alignment during composites processing, enhancing the composite properties. However, the fabric structures are formed by warp and weft yarns. These yarns are subjected to axial and shear loads, respectively. However, very limited work has been carried out on the study involving the tearing strength of the fabric. So it is necessary to study the effect of the tearing load of fabrics before converting them into composites. This paper focuses on the tearing strength of the sisal woven fabrics in both warp and weft directions. Two plain and one weftrib fabrics are prepared using sisal fibers, and their physical properties were characterized as per textile testing standards. Tear strength has been determined by Elmendorf Tear and Single Rip Tear Method by varying crosshead speeds. The result shows that woven patterns and number yarns significantly impact tearing strength. In the case of the weft rib pattern, the warp direction exhibits the highest tearing strength compared to the weft direction. Also, in the case of weftrib fabrics, the weft direction indicates better-tearing strength than another woven pattern. © 2023 The Author(s). Published with license by Taylor & Francis Group, LLC.