Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
10 results
Search Results
Item Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: Effect of inherent material damping(Academic Press, 2016) Arunkumar, M.P.; Jagadeesh, M.; Jeyaraj, J.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.L.This paper presents the results of numerical studies carried out on vibro-acoustic and sound transmission loss behaviour of aluminium honeycomb core sandwich panel with fibre reinforced plastic (FRP) facings. Layered structural shell element with equivalent orthotropic elastic properties of core and orthotropic properties of FRP facing layer is used to predict the free and forced vibration characteristics. Followed by this, acoustic response and transmission loss characteristics are obtained using Rayleigh integral. Vibration and acoustic characteristics of FRP sandwich panels are compared with aluminium sandwich panels. The result reveals that FRP panel has better vibro-acoustic and transmission loss characteristics due to high stiffness and inherent material damping associated with them. Resonant amplitudes of the response are fully controlled by modal damping factors calculated based on modal strain energy. It is also demonstrated that FRP panel can be used to replace the aluminium panel without losing acoustic comfort with nearly 40 percent weight reduction. © 2016 Elsevier LtdItem Vibro-acoustics response of an isotropic plate under non-uniform edge loading: An analytical investigation(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2020) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.M.Analytical studies carried out on the vibro-acoustic response behavior of an isotropic plate under non-uniform edge loads subjected to steady-state mechanical excitation is presented. An analytical method based on the energy approach is used to calculate the buckling load (Pcr). Free and forced vibration responses of the plate are obtained using an analytical method based on Reddy's third-order shear deformation theorem (TSDT) while sound radiation behavior is analyzed using Rayleigh Integral. Results revealed that Pcr is significantly influenced by the nature of non-uniform edge load. Similarly, natural frequencies reduce with an increase in axial compressive load due to a reduction in structural stiffness. Vibration and acoustic resonant amplitudes are affected by the intensity of the compressive load. Sound transmission loss reduces with an increase in compressive load magnitude and the effect is significant in the stiffness dominant region. © 2020 Elsevier Masson SASItem Analytical Solution for Sound Radiation Characteristics of Graphene Nanocomposites Plate: Effect of Porosity and Variable Edge Load(World Scientific, 2021) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.; Kumar, A.The effects of graded dispersion of graphene platelets and porosity on vibro-acoustics of nanocomposite plate exposed to variable edge loads are analytically investigated. Voigt and Halpin-Tsai micromechanics model is used to obtain effective properties of the porous graphene nanocomposites. The strain energy technique is implemented to estimate the buckling load (Pcr). By means of Reddy's third-order shear deformation theorem and Rayleigh Integral, vibration and acoustic responses are obtained. After validating the present analysis with the published results, the nature of edge loads on buckling and vibro-acoustic response is significant. It is noted that an increase in the intensity of non-uniform in-plane loads leads to changes in free vibration modes and resonant amplitude of response. The weight percentage and grading pattern of graphene reinforcement cause the stiffness hardening effect, whereas porosity distribution and coefficients cause the stiffness softening effect on the nanocomposite plate. It is found that the plate with symmetric distribution of graphene platelets with more concentration at the surface and symmetric porosity variation with more porosity at the center radiates less sound power. © 2021 World Scientific Publishing Company.Item Acoustic radiation and transmission loss of FG-Graphene composite plate under nonuniform edge loading(Elsevier Ltd, 2021) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.The influence of nonuniform edge loads on the acoustic response of a functionally graded graphene reinforced composite plate is investigated analytically. The energy method is implemented to calculate the buckling load (Pcr). An analytical method based on Reddy's third-order shear deformation theorem is used to obtain the vibration response, and acoustic response is obtained using Rayleigh Integral. The nature of edge load variation on buckling and vibro-acoustic response is significant. Free vibration mode shape changes with an increase in edge load and consequently affects the resonant amplitude of responses also especially for the plates with a higher aspect ratio. Volume fraction and dispersion pattern of graphene nano-platelets also influences the resonance amplitudes. Plate with FG?GRCC dispersion pattern has improved buckling and vibro-acoustic response behavior. Similarly, change in sound transmission loss level is significant in the stiffness region compared to the damping and mass dominated region. © 2021 Elsevier Masson SASItem Acoustic Response of an Isotropic Beam under Axially Variable Loads Using Ritz and Rayleigh Integral Methods(Polska Akademia Nauk, 2022) Somi Naidu, S.N.; Jeyaraj, J.; Mailan Chinnapandi, L.B.; Reddi Chintapalli, V.S.N.R.Vibro-acoustic response of an isotropic beam under the action of variable axial loads (VALs), is presented in the study. Effects of six different types of VALs and three types of end conditions on buckling, free vibration and sound radiation characteristics are investigated. Static buckling and free vibration behaviours using shear and normal deformable theorem and Ritz method. However, the forced vibration response is evaluated using modal superposition method and the acoustic radiation characteristics are obtained using Rayleigh integral. The nature of variation of VALs and end conditions are influencing buckling and free vibration characteristics remarkably. Results indicate that the acoustic response is highly sensitive to the nature of VAL and intensity of the VAL. In general, sound power at resonance decreases when the magnitude of VAL is increased. © © 2022 S.N. Balireddy et al.Item An exact solution for vibro-acoustic response of smart sandwich panels with MEE composite Layer(Elsevier Ltd, 2022) Arunkumar, M.P.; Bhagat, V.S.; Geng, Q.; Li, Y.; Jeyaraj, J.To the best of our knowledge, this is the first endeavor to provide an exact solution for a vibro-acoustic response of Magneto-electro-elastic (MEE) composite plate and sandwich panels with MEE facings. The governing equation of motion is developed using Hamilton's principle considering the third-order shear deformation theory to account for transverse shear. Based on boundary conditions and the Maxwell equation, the variation of electric and magnetic potentials are adopted along the thickness of the MEE composite layer. Analysis of the vibro-acoustic response of sandwich panels which are extensively used in aerospace structures such as cellular, trapezoidal, triangular, and honeycomb are presented. Influences of electric and magnetic potential on the vibro-acoustic response are also presented for the different types of truss core and honeycomb core sandwich panels. © 2022Item Thermal buckling and vibro-acoustic behaviour of functionally graded graphene polymer layered composites subjected to in-plane temperature variance(SAGE Publications Ltd, 2022) John, B.O.; Hassan, F.U.; George, N.; Chacko, T.; Bhagat, V.S.; Jeyaraj, J.; Kiran Kumar Reddy, R.The current study reports the thermal buckling, vibration and acoustic characteristics of functionally graded graphene polymer layer composite plates subjected to the in-plane temperature variance. The macroscopic properties of the composites are evaluated using the modified rule of mixtures to compute the layer-wise properties of an functionally graded graphene polymer layer composite plate. The critical buckling temperature is computed and compared for various functional gradings, boundary conditions and in-plane temperature variances. The in-plane temperature variance showed a major impact on the critical thermal buckling temperature and respective mode shapes. The vibro-acoustic behaviour of the functionally graded graphene polymer layer composite plate is investigated and documented keeping critical buckling temperature as a function. With an increase in thermal load and the nature of in-plane temperature variance, the vibro-acoustic results showed significant difference in velocity and acoustic response. For functionally graded graphene polymer layer composite plate with one free edge, the difference was statistically significant as indicated by an octave band plot. We conclude that the portion of the functionally graded graphene polymer layer composite plate that is subjected to the higher temperature in an in-plane temperature variance, as well as the nature of the boundary conditions may exacerbate the effect of in-plane temperature variance and are crucial in predicting vibro-acoustic characteristics. © IMechE 2022.Item An exact solution for vibro-acoustic response of MEE composite plate(Elsevier Ltd, 2022) Arunkumar, M.P.; Bhagat, V.S.; Swetha, S.; Geng, Q.; Jeyaraj, J.; Li, Y.To the best of our knowledge, this is the first endeavor to present an exact solution to predict vibro-acoustic characteristics of Magneto-electro-elastic (MEE) composite plate. The transverse and in-plane fields are considered based on thin-plate conditions. The variation of electric and magnetic potentials is determined according to electromagnetic boundary conditions and the Maxwell equation. The stress resultants and mass inertias are used in Hamilton's principle to generate the governing equation. Here the mathematical formulation is developed using third-order shear deformation theory. Also in this work, the dynamic displacement responses are provided by finding five undetermined mode coefficients relevant to u, v, w, ϕx, and ϕy to predict forced vibration response. The forced vibration response obtained based on the developed governing equation is used to calculate the acoustic characteristics using the Rayleigh integral. The effect of magnetic and electric potential is shown in the acoustic responses. From the results, it is understood that the acoustic responses are highly influenced by the applied magnetic and electric potential. The radiation efficiency of the MEE plate did not show any variations in the lower frequency and it shows the variation near the resonant frequencies on the application of electric and magnetic potential. © 2022 Elsevier LtdItem Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping(World Scientific, 2022) Gunasekaran, V.; Gulhane, S.; Gupta, S.; Jeyaraj, J.; Vasudevan, V.; Manickam, G.Sound radiation and transmission loss characteristics of variable stiffness composite plate reinforced with the curvilinear fibers are investigated numerically. The formulation is developed using higher-order shear flexible finite element model combined with Helmholtz wave equation. The governing equations obtained using Hamilton's approach are further solved through the modal super position method to analyze the vibration response under steady state excitation. The inherent material damping of the laminate is accounted through the modal damping calculated using the modal strain energy approach. The acoustic pressure of the variable stiffness laminates is estimated using the Raleigh integral. Subsequently, acoustic response characteristics such as acoustic power level, radiation efficiency, directivity pattern, and transmission loss from the laminates are predicted using the estimated sound pressure for various forcing frequencies. A parametric study covering a wide range of design variables including center and edge fiber angles, lamination scheme, thickness ratio, and boundary conditions on the acoustic sound behavior arising from the vibration of curvilinear fiber composite plate is detailed. This study reveals that the acoustic response of the curvilinear fiber composite plate is significantly influenced by the curvilinear fiber angles at the center/edge fiber angle of the layers. It is hoped that the results obtained here will be useful for designers in developing structures with desired acoustic response characteristics. © 2022 World Scientific Publishing Company.Item Vibro-acoustics of functionally graded porous beams subjected to thermo-mechanical loads(Techno-Press, 2022) Mailan Chinnapandi, M.C.L.; Jeyaraj, J.; Eltaher, M.A.This manuscript work presents a comprehensive continuum model capable to investigate the effect of porosity on vibro-acoustic behaviour of functionally graded (FG) beams resting on an elastic foundation subjected to thermal and mechanical loadings. Effects of uniform temperature rise and edge compressive load on the sound radiation characteristics are studied in a comparative manner. The numerical analysis is carried out by combining finite element method with Rayleigh’s integral. Detailed parametric studies are accomplished, and influences of power law index, porosity volume, porosity distribution and boundary conditions on the vibro-acoustic response characteristics are analyzed. It is found that the vibroacoustic response under mechanical edge compression is entirely different compared to from that under the thermal load. Furthermore, nature of grading of porosity affects the sound radiation behaviour for both the loads. The proposed model can be used to obtain the suppression performance of vibration and noise FG porous beams under thermal and mechanical loads. © © 2022 Techno-Press, Ltd.