Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Acoustic behaviour of 3D printed bio-degradable micro-perforated panels with varying perforation cross-sections(Elsevier Ltd, 2021) Sailesh, R.; Yuvaraj, L.; Jeyaraj, J.; Doddamani, M.; Mailan Chinnapandi, L.B.Influence of perforations having arbitrarily varying cross-sections on the acoustic behaviour of 3D printed bio-degradable panels made of Poly Lactic Acid (PLA) is presented. Circular perforations having six different types of cross-sectional variations namely convergent-divergent (CD), divergent-convergent (DC), convergent (C), divergent (D) with two different perforation diameters are realized using Fused Filament Fabrication (FFF) based 3D printing. Sound absorption and transmission loss characteristics of these perforated panels are estimated through impedance tube technique. Results revealed that sound absorption of perforated panels with varying cross-section is better than uniform cross-sectional perforation for the given frequency range. Among, the different cross-sectional variations explored, comparable and lower transmission losses are exhibited by DC and D perforation pattern with respect to constant diameter 1 mm panel. The sound transmission results of all other five specimens were significantly higher than constant diameter 8 mm panel and observed to be increasing with frequency. Geometrical perforation variations are noted to be a very crucial factor in designing soundproof panels as presented in this work. The experimental results are compared with the numerical results and found to be in good agreement. Such numerical analysis paves the guidelines for designing optimum perforation geometries prior to the on-field testing of the functional prototypes. © 2020 Elsevier LtdItem Sound absorption and transmission loss characteristics of 3D printed bio-degradable material with graded spherical perforations(Elsevier Ltd, 2022) Sailesh, R.; Yuvaraj, L.; Doddamani, M.; Mailan Chinnapandi, L.B.M.; Jeyaraj, J.The influence of spherical bubble perforations and their grading on acoustic characteristics of a 3D printed bio-degradable material is investigated. Samples with spherical bubble perforations of different sizes are distributed either uniformly or graded across the specimen thickness. A sample having typical cylindrical perforations is also analyzed for comparative analysis. Sound absorption (SA) and sound transmission loss (STL) characteristics are estimated by the impedance tube method. The results reveal that the SA of all functionally graded (FG) perforations is higher at low frequencies. The SA and bandwidth are higher for a specimen with uniform, lower diameter bubbles at higher frequencies. The STL of FG perforations is highest among the specimens, and the difference increases significantly with frequency. The numerical and experimental results match a high degree of accuracy. FG perforations exhibited superior performance for both SA and STL. The proposed graded spherical porosity can be effectively utilized in soundproofing applications across building and transportation sectors. © 2021 Elsevier LtdItem Experimental and numerical investigation on sound absorption characteristics of 3D printed coupled-cavity integrated passive element systems(SAGE Publications Inc., 2022) Yuvaraj, L.; Jeyanthi, S.; Mailan Chinnapandi, L.B.M.; Jeyaraj, J.In aerospace applications, most of the components are made of composite materials due to the high strength-to-weight ratio. However, those composite structures are poor in sound absorption; for instance, payload fairing used in the launch vehicle system experiences broadband noise. Tuned Helmholtz resonator (HR) is being used to control few dominant low frequencies, and other frequency is left untreated. In this study, the acoustic mode of the rectangular cavity has been suppressed by a novel design of integrated passive elements (IPEs), which comprises a Helmholtz resonator, micro-perforated panel, and polyurethane foam. The proposed design reduces the noise level in Low-Mid-High frequencies, which is more efficient than passive elements used to control a single target frequency. The integrated passive components fabricated using the 3D printing technique are tested experimentally in an impedance tube to quantify the sound absorption coefficient, and the results are compared with the theoretical result. Further, the study presents a simplified approach for numerical simulation of fabricated samples coupled to a rectangular cavity system, which is validated experimentally. The overall sound pressure level (OSPL) results of the proposed design achieve 4–6 dB noise level reduction in (Formula presented.) octave frequency band. © The Author(s) 2021.