Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Isolation of Thiobacillus sp from aerobic sludge of distillery and dairy effluent treatment plants and its sulfide oxidation activity at different concentrations(Triveni Enterprises, 2007) Ravichandra, P.; Mugeraya, G.; Rao, A.G.; Ramakrishna, M.; Jetty, A.In the present study two strains of Thiobacillus sp were isolated from aerobic sludge of distillery and dairy effluent treatment plant using standard methods of isolation and enrichment. Experiments were conducted using isolated cultures in batch bioreactor with initial sulfide concentration of 75 and 150 mg/l. The effect of initial sulfide concentration on the activity of isolated Thiobacillus sp was studied. Sulfide oxidizing capacity was also determined at different initial sulfide concentrations. The results from the study indicate the possible isolation of Thiobacillus cultures from native source and application in the full-scale reactor. © Triveni Enterprises.Item Biological treatment of toxic petroleum spent caustic in fluidized bed bioreactor using immobilized cells of thiobacillus RAI01(2008) Potumarthi, R.; Mugeraya, G.; Jetty, A.In the present studies, newly isolated Thiobacillus sp was used for the treatment of synthetic spent sulfide caustic in a laboratory-scale fluidized bed bioreactor. The sulfide oxidation was tested using Ca-alginate immobilized Thiobacillus sp. Initially, response surface methodology was applied for the optimization of four parameters to check the sulfide oxidation efficiency in batch mode. Further, reactor was operated in continuous mode for 51 days at different sulfide loading rates and retention times to test the sulfide oxidation and sulfate and thiosulfate formation. Sulfide conversions in the range of 90-98% were obtained at almost all sulfide loading rates and hydraulic retention times. However, increased loading rates resulted in lower sulfide oxidation capacity. All the experiments were conducted at constant pH of around 6 and temperature of 30?±?5 °C. © 2008 Humana Press.Item Biological sulfide oxidation using autotrophic Thiobacillus sp.: Evaluation of different immobilization methods and bioreactors(2009) Ravichandra, P.; Gopal, M.; Jetty, A.Aims: Evaluation of various immobilization methods and bioreactors for sulfide oxidation using Thiobacillus sp. was studied. Methods and Results: Ca-alginate, K-carrageenan and agar gel matrices (entrapment) and polyurethane foam and granular activated carbon (adsorption) efficacy was tested for the sulfide oxidation and biomass leakage using immobilized Thiobacillus sp. Maximum sulfide oxidation of 96% was achieved with alginate matrix followed by K-carrageenan (88%). Different parameters viz. alginate concentration (1%, 2%, 3%, 4% and 5%), CaCl2 concentration (1%, 2%, 3%, 4% and 5%), bead diameter (1, 2, 3, 4 and 5 mm), and curing time (1, 3, 6, 12 and 18 h) were studied for optimal immobilization conditions. Repeated batch experiments were carried out to test reusability of Ca-alginate immobilized beads for sulfide oxidation in stirred tank reactor and fluidized bed reactor (FBR) at different sulfide concentrations. Conclusions: The results proved to be promising for sulfide oxidation using Ca-alginate gel matrix immobilized Thiobacillus sp. for better sulfide oxidation with less biomass leakage. Significance and Impact of the Study: Biological sulfide oxidation is gaining more importance because of its simple operation. Present investigations will help in successful design and operation of pilot and industrial level FBR for sulfide oxidation. © 2009 The Society for Applied Microbiology.