Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Janakiraman, S.Subject: search.filters.subject.Polyelectrolytes

Search Results

Now showing 1 - 6 of 6
  • No Thumbnail Available
    Item
    A new strategy of PVDF based Li-salt polymer electrolyte through electrospinning for lithium battery application
    (Institute of Physics Publishing helen.craven@iop.org, 2019) Janakiraman, S.; Surendran, A.; Ghosh, S.; Anandhan, S.; Adyam, A.
    Polyvinylidene fluoride (PVDF) ultrafine fibers with different proportions of lithium nitrate (LiNO3) were fabricated by an electrospinning device. The processing parameters are optimized to 19 wt% PVDF to get a bead free structure. Scanning electron microscope (SEM) and atomic force microscope (AFM) showed the uniform and interconnected porous structure. With the addition of 2 wt% LiNO3, the fiber diameter of the electrospun membrane decreased from 371 to 222 nm. Furthermore, the addition of LiNO3 into the nanofibrous membrane enhanced the ionic conductivity from 0.97 ×10-3 S cm-1 to 1.61 ×10-3 S cm-1 at room temperature after soaking with 1 M LiPF6 (lithium hexafluoro-phosphate) in ethylene carbonate (EC) and diethyl carbonate (DEC) in (1:1 wt%). Compared with the conventional Celgard and pristine PVDF membrane, the salt doped PVDF membranes showed higher electrochemical stability window and lower interfacial resistance. The electrospun membrane separators (ES) were assembled into Lithium cobalt oxide (LiCoO2) as cathode and lithium metal as an anode. The salt doped membrane showed superior discharge, C-rate and stable cycle performance than the commercial Celgard membrane. © 2018 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Electrospun electroactive polyvinylidene fluoride-based fibrous polymer electrolyte for sodium ion batteries
    (Institute of Physics Publishing helen.craven@iop.org, 2019) Janakiraman, S.; Surendran, A.; Biswal, R.; Ghosh, S.; Anandhan, S.; Adyam, A.
    Electrospinning is an efficient technique to produce ultrafine electroactive mat, diameters ranging from few nanometers to micrometers to use as a separator in sodium ion battery. The polyvinylidene fluoride (PVDF) polymer solution was optimized to 19 wt%, applied voltage 25 kV and flow rate of 0.5 ml h-1 to get a bead free ultrafine electroactive structure. The electroactive ?-phase is confirmed by x-ray diffractometer (XRD). Ionic conductivities, electrolyte uptake, wettability, linear sweep voltammetry (LSV) and thermal stability of the electroactive fibrous polymer electrolyte (EFPE) were studied by soaking the separator with a liquid electrolyte of 1 M sodium hexafluorophosphate (NaPF6) dissolved in ethylene carbonate (EC)/propylene carbonate (PC) (1:1 vol%). The EFPE exhibits high ionic conductivity of 1.08 mS cm-1 and electrochemical stability window of 5.0 V versus Na/Na+ under ambient condition. The half-cell containing Na0.66Fe0.5Mn0.5O2 as cathode and EFPE as the separator cum electrolyte showed a stable cycling performance at a current rate of 0.1C. © 2019 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    PVDF/halloysite nanocomposite-based non-wovens as gel polymer electrolyte for high safety lithium ion battery
    (John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Janakiraman, S.; Ghosh, S.; Adyam, A.; Anandhan, S.
    Gel polymer electrolyte (GPE) based on electrospun poly(vinylidene fluoride) (PVDF)/halloysite nanotube (HNT) nanocomposite non-wovens was synthesized and its suitability as a separator in lithium-ion battery (LIB) was explored. In this study, HNT played a key role in reducing the average diameter of the electrospun fibers and uplifted the porosity of the non-wovens thereby improving their electrolyte uptake. Due to a reduction in crystallinity and increased % porosity of the PVDF/HNT non-wovens, the ionic conductivity (1.77 mScm?1) and ionic transport across the separator were improved. Moreover, this GPE separator exhibited high tensile and puncture strength with negligible thermal shrinkage and a higher melting temperature compared with a commercially available separator, which is vital from the safety perspective. The cycling performance of Li/GPE/LiCoO2 cell was evaluated and it exhibited a high capacity of 138.01 mAhg?1 with 97% coulombic efficiency for the initial cycle. The cell was stable and retained its high performance with little loss in capacity even after repeated charge–discharge cycles. Such a combination of high ionic conductivity, tensile strength with low thermal shrinkage is seen to be very rare in polymer-based separators. It is noteworthy that this novel GPE outperformed the commercial separator also in the cycle performance. POLYM. COMPOS., 40:2320–2334, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers
  • No Thumbnail Available
    Item
    An electroactive ?-phase polyvinylidene fluoride as gel polymer electrolyte for magnesium–ion battery application
    (Elsevier B.V., 2019) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.
    The gel polymer electrolytes (GPEs) are currently interesting research area in rechargeable batteries. In the present study, synthesis and characterization of electroactive gel polymer electrolyte (EGPE) for Mg-ion batteries application have been investigated. The bead free electroactive polyvinylidene fluoride (PVDF) with high porosity is achieved by an electrospinning process. The ?-phase of PVDF is polar and electroactive with a high dipole moment. Electroactive ?-phase is confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Field emission scanning electron microscopy (FESEM) study is done to analyze the structure and morphology of the electroactive membrane. The electroactive gel polymer electrolyte is formed by immersing an electroactive PVDF membrane in 0.3 M magnesium perchlorate (MgClO4) and propylene carbonate (PC) solution. The ionic conductivity of electroactive ?-phase PVDF membrane is achieved to be 1.49 mS cm?1 at 30 °C, which is higher than commercial available polypropylene (PP) Celgard. Tortuosity of electroactive gel polymer electrolyte is found to be 1.44. The voltage stability of the EGPE is stable up to a high voltage of 5.0 V against Mg+2/Mg. The total ionic transference number and magnesium ion transference number of EGPE are also investigated to confirm high ionic conductivity. © 2019 Elsevier B.V.
  • No Thumbnail Available
    Item
    A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery
    (Springer, 2020) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.
    The ionic conductivity and thermal stability of the electrolyte-separator system is an essential parameter for improving battery performance and safety. The present work addresses the high thermally stable gel polymer electrolyte (GPE) using polyacrylonitrile (PAN) as a polymer membrane and magnesium perchlorate in propylene carbonate (Mg(ClO4)2-PC) as a liquid electrolyte. The PAN based polymer membrane is prepared by electrospinning process which produces a bead free and uniformly distributed nanofibers. The electrospun PAN based GPE is characterized by different physical and electrochemical techniques like X-ray diffraction, field emission scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry, ionic conductivity, linear sweep voltammetry, magnesium ion transference number and electrochemical impedance spectroscopy. The ionic conductivity of PAN is 3.28 mS cm?1, compared to that of PP Celgard is 1.97 × 10–4 mS cm?1 at 30 °C. The electrochemical stability of PAN is 4.6 V and also exhibits excellent interfacial stability with magnesium metal. The results showed that the PAN-based GPE has higher ionic conductivity and thermal stability than the polypropylene (PP) Celgard membrane. © 2020, Springer Science+Business Media, LLC, part of Springer Nature.
  • No Thumbnail Available
    Item
    Synthesis and evaluation of a new gel polymer electrolyte for high-performance Li-ion batteries from electrospun nanocomposite of PVDF/Ca–Al-layered double hydroxide
    (Springer Nature, 2022) Shamitha, C.; Janakiraman, S.; Ghosh, S.; Adyam, V.; Prabhu, K.N.; Anandhan, S.
    Poly(vinylidene fluoride) (PVDF)/Ca–Al-layered double hydroxide(CAL) (PCL) nanocomposite-based nanofabrics were electrospun for application in lithium-ion batteries as gel polymer electrolyte (GPE). The nanofabric exhibited a high β-phase content of 82.79% after the addition of CAL that was synthesized by co-precipitation method. The PCL-based GPE exhibited enhanced electrochemical properties, such as high ionic conductivity, optimal Li-ion transference number, and improved electrolyte uptake due to the presence of a highly interconnected porous structure. The PCL GPE exhibited an ionic conductivity of 3.54 × 10–3 S cm−1 at ambient temperature, which is much higher than that of pristine PVDF and commercial Celgard® 2400 separators. Moreover, Li/PCL/LiCoO2 cell showed an initial discharge capacity of 140.31 mAh g−1, which is superior to that of PVDF and Celgard® 2400 separators. It also exhibited high coulombic efficiency retention of 99% after 30 cycles of charging. PCL-based GPE showed superior mechanical and low thermal shrinkage properties, indicating its suitability in battery separator application. Graphical abstract: [Figure not available: see fulltext.] © 2022, The Author(s), under exclusive licence to The Materials Research Society.