Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Preparation and characterization of polysulfone and modified poly isobutylene-alt-maleic anhydride blend NF membrane(2012) Ganesh, B.M.; Isloor, A.M.; Padaki, M.Recently nanofiltration (NF) is gaining more importance for water treatment. It is replacing the conventional method of water treatment due to advantages of NF membranes over RO system. In this work, we are discussing the preparation of NF membrane for desalination of sea water. We herein report the synthesis of polymer, by the reaction of p-amino benzoic acid (PABA) and poly isobutylene-alt-maleic anhydride (PIAM) and its blend membrane preparation with polysulfone (PSf). The new membranes were characterized by SEM images, surface wettability to investigate the hydrophilic nature of the membrane, water swelling, pure water flux, molecular weight cut-off and salt rejection of the membranes. The membranes showed nano size (<50nm) pores in SEM image, and the contact angle data revealed that membrane surface is moderately hydrophilic. Membrane with 70:30 (PSf:modified PIAM) composition has shown good salt rejection of 96% at 200kPa for 3500ppm of NaCl solution with a pure water flux of 38.36Lm -2h -1. © 2011 Elsevier B.V.Item Favorable influence of mPIAM on PSf blend membranes for ion rejection(Elsevier B.V., 2017) Jyothi, M.S.; Soontarapa, K.; Padaki, M.; Balakrishna, R.G.; Isloor, A.M.The study reports the use of a novel membrane for heavy metal removal and salt rejection. Poly isobutylene alt maleic anhydride (PIAM) modified by sulfanilic acid is blended with polysulfone (PSf) in different concentrations. This induces surface charge and hydrophillicity in the otherwise hydrophobic PSf membranes. The so modified polymers and their blends are characterized by spectroscopic and microscopic techniques. Blend membranes show drastically enhanced performance with respect to water flux, water uptake and ion exchange capacity. SEM micrographs indicate the hydrophilic domains, –SO3H groups in the polymer to have formed cavities during phase inversion process, thus enhancing permeability. 100% rejection of PEG 2000 and 59% of NaCl rejection substantiated the nature of the membrane to be nanofiltration (NF) type. The prepared membranes were further evaluated for Cr (VI) removal, with removal efficiency reaching above 92%. The electronic coupling that occurs between SO3H? and Na+ and the electrostatic interaction between metal ions and the charge on membrane facilitates NaCl and Cr (VI) rejection respectively. The study gains significance in use of such modified PIAM as blend material with any other polymer to enhance the native properties of the blend membrane. © 2017 Elsevier B.V.Item Fabrication of a novel hollow fiber membrane decorated with functionalized Fe2O3 nanoparticles: Towards sustainable water treatment and biofouling control(Royal Society of Chemistry, 2017) Hebbar, R.S.; Isloor, A.M.; Kulal, K.; Abdullah, M.S.; A.F., A.F.The development of sustainable, surface-functionalized hollow fiber membranes with advanced nanomaterials has enabled the tailoring and targeted control of their physicochemical properties. This provides the material with improved features of hydrophilicity and permeability, excellent selectivity, and superior antifouling and antimicrobial activity. We explored a new strategy using well dispersed functionalized Fe2O3 nanoparticles to fabricate a polyetherimide nanocomposite hollow fiber membrane with enhanced surface and anti-biofouling properties. To confirm the membrane modification, a series of characterizations such as contact angle, surface energy, water uptake capacity, porosity, zeta potential, and morphological analysis were performed. The permeation experiment indicated superior hydrodynamic permeability and antifouling properties with more than 95% rejection of BSA protein molecules after inclusion of a 1.5 wt% additive dosage. Moreover, the nanocomposite membrane exhibited a relatively higher normalized flux and rejection up to 94% during the filtration of hazardous natural organic matter (NOM) with differing parameters such as the feed solution pH and ionic strength. The presence of modified Fe2O3 nanoparticles in the membrane significantly inhibits the growth of bacteria and other microorganisms on the membrane surface, resulting in an enhanced anti-biofouling property. In particular, the demonstrated method illustrates a fast, facile strategy for the functionalization of Fe2O3 nanoparticles to improve the membrane properties and anti-biofouling activity, giving them great potential for effective and sustainable water treatment applications. © 2017 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique.