Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Continuous Production of Clean Hydrogen from Wastewater by Microbial Usage(wiley, 2023) Satishkumar, P.; Isloor, A.M.; Farnood, R.Biohydrogen production from wastewater is a prominent way to address escalating global energy demand and alarming environmental pollution. The need for renewable, sustainable, economic, and environment-friendly pathways for energy generation is fulfilled by biohydrogen evolution. Wastewaters contain a vast array of organic contents, as well as microbes and are a suitable source for bioreactors. Treatment of wastewaters with hydrogen-generating bacteria significantly aids its purification process by reducing chemical oxygen demand with simultaneous hydrogen generation. Among the various methods that are available for hydrogen production from microbes, photo fermentation, dark fermentation, and microbial electrolysis cells are discussed thoroughly. Continuous hydrogen generation systems are most suitable for large scale commercial production. Uniform product quality is obtained in the case of continuous systems. Microbial electrolysis cells have been found to yield exceptionally good hydrogen purity. A variety of factors that affect hydrogen evolution in all the techniques are reviewed in detail. © 2023 Scrivener Publishing LLC. All rights reserved.Item Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles(Springer Verlag, 2019) Kolangare, I.M.; Isloor, A.M.; Zulhairun, Z.A.; Kulal, A.; A.F., A.F.; Siddique, I.; Asiri, A.M.The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of dyes, including the application of nano-sized adsorbents, nanocomposite membranes and photodegradation. Membrane filtration is an alterntive but suffers from drawbacks such as fouling. Here we present a simple approach for the development of antibiofouling membranes based on chitosan. The application of chitosan-based nanoparticles as additives for wastewater treatment is poorly explored. The chitosan and silver-loaded chitosan nanoparticles were synthesized by ionic gelation method and incorporated to fabricate hollow-fiber membranes by dry–wet spinning technique. The prepared membranes were characterized by morphological study, permeability test, antibiofouling study and dye rejection study. The nanocomposite hollow-fiber membranes displayed superior performance than their pristine form. The incorporation of 0.30 weight percent of the chitosan and silver-loaded chitosan nanoparticles into the hollow-fiber membranes enhanced the antifouling property with flux recovery ratio of 81.21 and 86.13%, respectively. The dye rejection results showed maximum rejection of 89.27 and 86.04% for Reactive Black 5 and Reactive Orange 16, respectively. Hence, it can be concluded that hollow-fiber membranes with silver-loaded chitosan nanoparticles are pertinent in developing antibiofouling membranes for the treatment of industrial dye effluents. © 2018, Springer Nature Switzerland AG.Item Novel polyphenylsulfone (PPSU)/nano tin oxide (SnO2) mixed matrix ultrafiltration hollow fiber membranes: Fabrication, characterization and toxic dyes removal from aqueous solutions(Elsevier B.V., 2019) Nayak, M.C.; Isloor, A.M.; Siddique, I.; Balakrishna Prabhu, B.; Ismail, N.I.; Asiri, A.M.Novel polyphenylsulfone (PPSU)/nano tin oxide (SnO2) mixed matrix hollow fiber membranes (HFMs) were fabricated by dry-wet spinning via phase separation method. In the current research, reported the contrast between neat PPSU membrane and nanocomposite membranes (PPSU/SnO2), to determine the toxic reactive dyes namely, reactive black-5 (RB-5) and reactive orange-16 (RO-16) removal ability from the aqueous media. Scanning electron microscopy (SEM) was used to observe the HFMs cross-sectional morphological changes and surface roughness parameters of membranes were analyzed using atomic force microscopy (AFM). The surface wettability ability of HFMs was examined with a contact angle, water uptake, and porosity measurements. The cross-flow filter unit was engaged to quantify the water permeability, anti-fouling ability as well as the dye rejection ability of fabricated membranes. With increasing the SnO2 NPs wt% in PPSU polymer matrix the membrane performance was enhanced continuously, it became evident that the incorporated SnO2 NPs plays main role in membrane performance. Added, water-soluble poly (vinylpyrrolidone) (PVP) can also impact the pore morphology in membranes. At the end, PS-3 membrane exhibited lower contact angle (63.7 0), higher water uptake (74.8%), porosity (84.1%), pure water flux 362.9 L/m2 h, and high potential for dyes rejection application, of about >94% for RB-5, and >73% for RO-16 dye, respectively. From the preliminary results, it can be stated that the usage of SnO2 NPs in membrane technology become effective towards wastewater treatment. © 2019 Elsevier B.V.Item Polyphenylsulfone/multiwalled carbon nanotubes mixed ultrafiltration membranes: Fabrication, characterization and removal of heavy metals Pb2+, Hg2+, and Cd2+ from aqueous solutions(Elsevier B.V., 2020) Chandrashekhar Nayak, M.; Isloor, A.M.; Siddique, I.; Lakshmi, B.; Marwani, H.M.; Khan, I.Polyphenylsulfone/multiwalled carbon nanotubes/polyvinylpyrrolidone/1-methyl-2-pyrrolidone mixed matrix ultrafiltration flat-sheet membranes were fabricated via phase inversion process to inspect the heavy metals separation efficacy from aqueous media. Fabricated membranes cross-sectional morphological changes and the topographical alterations were assessed with Scanning electron microscopy (SEM) and atomic force microscopy (AFM). Particularly, MWCNTs assisted membranes exhibited better permeability ability as well as heavy metal removal enactment than virgin membrane. The dead-end filter unit was engaged in current research to examine the permeability and heavy metal removal competence of membranes. With the continuous enhancement of MWCNTs wt% in a polymer matrix, significant enhancement was observed with pure water flux study, from 41.69 L/m2 h to >185 L/m2 h as well as with the heavy metals separation study. Added additive MWCNTs can impact the pore sizes in membranes. The heavy metal separation results achieved, the membrane with 0.3 wt% of MWCNTs (PCNT-3) exhibited >98%, >76% and >72% for Pb2+, Hg2+ and Cd2+ ions, respectively. Overall, MWCNTs introduced PPSU membranes exposed best outcomes with heavy metals contained wastewater treatment. © 2019 The AuthorsItem Synthesis and characterization of titanium dioxide hollow nanofiber for photocatalytic degradation of methylene blue dye(MDPI AG, 2021) Jafri, N.N.M.; Jaafar, J.; Alias, N.H.; Samitsu, S.; Aziz, F.; Salleh, W.N.W.; Mohd Yusop, M.Z.M.; Othman, M.H.D.; Rahman, M.A.; A.F., A.F.; Matsuura, T.; Isloor, A.M.Environmental crisis and water contamination have led to worldwide exploration for advanced technologies for wastewater treatment, and one of them is photocatalytic degradation. A one?dimensional hollow nanofiber with enhanced photocatalytic properties is considered a promising material to be applied in the field. Therefore, we synthesized titanium dioxide hollow nanofibers (THNF) with extended surface area, light?harvesting properties and an anatase–rutile heterojunction via a template synthesis method and followed by a calcination process. The effect of calcination temperature on the formation and properties of THNF were determined and the possible mechanism of THNF formation was proposed. THNF nanofibers produced at 600 °C consisted of a mixture of 24.2% anatase and 75.8% rutile, with a specific surface area of 81.2776 m2/g. The hollow nanofibers also outperformed the other catalysts in terms of photocatalytic degradation of MB dye, at 85.5%. The optimum catalyst loading, dye concentration, pH, and H2O2 concentration were determined at 0.75 g/L, 10 ppm, pH 11, and 10 mM, respectively. The highest degradation of methylene blue dye achieved was 95.2% after 4 h of UV irradiation. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.Item The efficacy of Fe-doped ZrO2 nanoparticles as a supplement in polysulfone membranes for toxic dye removal(Institution of Chemical Engineers, 2024) Manikanta, P.; Naik, N.S.; Isloor, A.M.; Padaki, M.; Nagaraja, B.M.; Déon, S.ZrO2 nanoparticles fine-tuned with iron doping (5%Fe-ZrO2) were incorporated by the phase inversion method as a supplement in polysulfone (PSf) membrane medium for dye rejection. The prepared nanocomposite membranes were examined using a variety of characterisation techniques. The findings showed that adding 5%Fe-ZrO2 nanoparticles into the membrane matrix improved its permeability by reducing the contact angle and increasing hydrophilicity. The PSf nanocomposite membrane containing 1 wt% of 5%Fe-ZrO2 (M2) was found to exhibit a dye rejection efficiency of 99% for Eriochrome black-T (EBT) and 98% for Methylene blue (MB), with a flux of 10.2 ±1 LMH. The manufactured membranes can reject dyes and offer commendable productivity and selectivity, making them a popular choice for membrane applications. © 2024 The Institution of Chemical EngineersItem High performance 2D molybdenum MXene polyphenylsulfone membranes for boosting water flux and efficient removal of humic acid, antibiotic and dyes from wastewater(Elsevier B.V., 2025) Satishkumar, P.; Isloor, A.M.; Farnood, R.MXene, a leading two-dimensional material, is attracting scientists due to its rich polar surface termination and compatibility. Through the etching of an aluminum layer from Mo3AlC2, we have effectively produced molybdenum MXene Mo3C2Tx (where T stands for polar moieties like –OH and ?F) and used it to fabricate a new Mo3C2Tx embedded mixed matrix membrane. By the incorporation of highly hydrophilic Mo3C2Tx MXene into polyphenylsulfone (PPSU) membrane, its water flux tremendously increased to a peak value of 290 L m-2h?1 and is higher than 300 % compared to pristine polyphenylsulfone membrane without Mo3C2Tx MXene. Water contact angle study of Mo3C2Tx MXene embedded membranes showed improvement in hydrophilicity with an increase in its loading. Mo3C2Tx-PPSU membrane demonstrated appreciable antifouling nature and pollutant separation efficacy. The optimal membrane revealed 98.68 %, 96.7 %, 84.72 %, and 80.2 % removal of toxic contaminants like humic acid, RB 5 dye, RO 16 dye, and tetracycline antibiotic, respectively. This study offers a novel Mo3C2Tx embedded polyphenylsulfone membrane for wastewater treatment that eliminates potentially harmful humic acid, antibiotics, and dyes. © 2025