Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Fabrication of polydopamine functionalized halloysite nanotube/polyetherimide membranes for heavy metal removal(Royal Society of Chemistry, 2016) Hebbar, R.S.; Isloor, A.M.; Kulal, K.; A.F., A.F.Polydopamine modified halloysite nanotubes (HNTs) were synthesised through a one step facile procedure and employed as a well dispersed hydrophilic additive to enhance the filtration properties of polyetherimide (PEI) membranes. The nanocomposite membranes were prepared by an immersion precipitation method with different amounts of modified HNTs (MHNTs) in the casting solution. The good dispersion of MHNTs throughout the membrane matrix was confirmed by elemental mapping analysis. The prepared nanocomposite membranes were extensively studied in terms of their porosity, morphology, membrane hydraulic resistance and hydrophilicity. The permeation experiments showed that the modified membranes exhibited higher water flux than a pristine PEI membrane. The antifouling and anti-biofouling behaviour of the modified membranes was investigated in detail. The results revealed that a membrane with a 3 wt% MHNT dosage showed a higher Fouling Resistance Ratio (FRR) of 74.5% with reversible membrane fouling of 64.3%. Moreover, the membrane showed excellent resistance to microbial growth on the membrane surface. The well performing membrane was subjected to heavy metal ion rejection. Results indicated that membranes had the capacity to adsorb Pb2+ and Cd2+. Overall, PEI-MHNTs nanocomposite membranes could have great potential to improve antifouling, anti-biofouling and filtration properties. © The Royal Society of Chemistry 2016.Item Synthesis and characterization of novel sulfanilic acid-polyvinyl chloride-polysulfone blend membranes for metal ion rejection(Royal Society of Chemistry, 2016) Nayak, V.; Jyothi, M.S.; Balakrishna, R.G.; Padaki, M.; Isloor, A.M.Near-complete removal of heavy metals, namely Cd(ii), Cr(vi) and Pb(ii), has been attempted by a membrane purification process using a blend of modified polyvinyl chloride (PVC) and polysulfone (PSf), prepared by the diffusion induced phase separation (DIPS) method. The prepared novel material was characterized by NMR, ATR-IR spectroscopy and DSC. The sulphonyl groups incorporated into PVC enhance the hydrophilicity and are substantiated by water uptake, contact angle (CA) and flux studies. The obtained properties of the blend membrane like increased surface roughness and porosity are observed from AFM and SEM analysis. An enhanced rejection of ?95% which is about 1.15, 1.41 and 1.37 times better than the commercially available NF 270 membrane was observed, for Cd(ii), Cr(vi) and Pb(ii) respectively. The work was further extended to study the antifouling property and the interference of other existing metal ions on the performance. An improved antifouling property with 98.5% rejection for bovine serum albumin (BSA) and a 75.6% flux recovery ratio (FRR) was achieved. The study gains significance in exploring the incorporation of sulphonyl groups in to polymers, to enhance membrane performance. © The Royal Society of Chemistry 2016.Item Favorable influence of mPIAM on PSf blend membranes for ion rejection(Elsevier B.V., 2017) Jyothi, M.S.; Soontarapa, K.; Padaki, M.; Balakrishna, R.G.; Isloor, A.M.The study reports the use of a novel membrane for heavy metal removal and salt rejection. Poly isobutylene alt maleic anhydride (PIAM) modified by sulfanilic acid is blended with polysulfone (PSf) in different concentrations. This induces surface charge and hydrophillicity in the otherwise hydrophobic PSf membranes. The so modified polymers and their blends are characterized by spectroscopic and microscopic techniques. Blend membranes show drastically enhanced performance with respect to water flux, water uptake and ion exchange capacity. SEM micrographs indicate the hydrophilic domains, –SO3H groups in the polymer to have formed cavities during phase inversion process, thus enhancing permeability. 100% rejection of PEG 2000 and 59% of NaCl rejection substantiated the nature of the membrane to be nanofiltration (NF) type. The prepared membranes were further evaluated for Cr (VI) removal, with removal efficiency reaching above 92%. The electronic coupling that occurs between SO3H? and Na+ and the electrostatic interaction between metal ions and the charge on membrane facilitates NaCl and Cr (VI) rejection respectively. The study gains significance in use of such modified PIAM as blend material with any other polymer to enhance the native properties of the blend membrane. © 2017 Elsevier B.V.Item Integration of Zwitterionic Polymer Nanoparticles in Interfacial Polymerization for Ion Separation(American Chemical Society, 2020) Gnani Peer Mohamed, G.P.S.; Isloor, A.M.; Bavarian, M.; Nejati, S.A thin-film nanocomposite (TFN) membrane was developed by integrating zwitterionic polymeric nanoparticles into the active layer of the membranes. High surface area zwitterionic polymeric nanoparticles (370 m2/g) were developed through distillation-precipitation polymerization (DPP). Sodium 4-vinylbenzenesulfonate (SVBS) was used as the monomer and N,N?-methylenebis(acrylamide) (MBAAm) utilized as the cross-linking agent. l-cysteine (l-Cys) was tethered to these matrices through thiol-ene reaction. The as-synthesized zwitterionic P(MBAAm-co-SVBS)@l-Cys nanoparticles were dispersed into the organic solution of trimesoyl chloride (TMC) to be integrated into the polyamide (PA) selective layer of thin film nanofiltration membranes. The PA layer was synthesized by interfacial polymerization through the reaction of 2% (w/v) of piperazine (PIP) in the aqueous phase and 0.15% (w/v) of the TMC solution. The fabricated TFN membranes exhibited pure water permeability (Jw) of 11.4 L/m2h bar and salt rejection value of 97.6% and 16.9%, for sodium sulfate and sodium chloride, respectively. The fabricated membranes demonstrated metal ion removal efficiencies of 99.48% and 95.67% for Pb2+ and Cd2+ ions, respectively. © © 2020 American Chemical Society.