Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Laboratory investigation on hydraulic performance of enlarged pile head breakwater(Elsevier Ltd, 2020) Suvarna, P.S.; Hunasanahally Sathyanarayana, A.H.; Umesh, P.; Shirlal, K.G.Coastal erosion of beaches has been a common problem around the world. One of the eco-friendly control measures for coastal erosion is to dissipate the energy of waves impinging on the shores by constructing offshore breakwater. Pile breakwater is one such type of offshore breakwater that consists of a number of closely spaced piles. Construction of piles at closer spacing is highly challenging and expensive. This problem can be addressed by reducing the number of piles and modifying the pile with an enlarged head in the vicinity of the water surface, where wave energy is concentrated. In the present study, an experimental investigation on the hydraulic performance of enlarged pile head breakwater is conducted in a wave flume. The concept breakwater is subjected to monochromatic waves of varying wave heights, wave periods and water depth. The experimental results show that the least value of transmission coefficient is 0.62 and reflection coefficient is 0.123 with the highest value of dissipation coefficient of 0.77 for the structural configuration of b/D ratio of 0.2, D/Hmax of 0.6 and Y/Hmax of 1.0 at a water depth of 0.3 m. Observed results are encouraging and are in line with the similar type of pile breakwaters in a single row. The present experimental data is also validated with the available theoretical solutions. Since the results from the compared theoretical solution are not in good agreement, a hybrid theoretical model is reconstructed based on experimental results of pile head breakwater. The proposed modified version of the hybrid equation predicts encouragingly better transmission, reflection and dissipation coefficient than the existing solutions. Moreover, the results predicted by the proposed hybrid equation are in good agreement with that of other similar pile breakwater models. © 2020 Elsevier LtdItem Performance characteristics of a conical pile head breakwater: An experimental study(Elsevier Ltd, 2021) Hunasanahally Sathyanarayana, A.H.; Suvarna, P.S.; Umesh, P.; Shirlal, K.G.Breakwaters are constructed for dissipating the wave energy and safeguarding the coastline from destructive wave forces. Conventional pile breakwater built using prismatic circular piles has been proven to provide partial protection efficiently. In the present study, the conventional pile breakwater is modified by widening the pile's cross-sectional area at the surface level in a conical shape. The concept of introducing the conical shape is to attenuate the concentrated wave energy, mainly focusing at the surface. The influence of the structural parameters such as diameter, height and clear spacing of the conical pile head is investigated experimentally for various monochromatic wave climatic conditions. The investigation is also focused on determining the influence of the second row on performance characteristics. The analysis shows that the least transmission coefficient (Kt) of 0.662 for the configuration of D/Hmax = 0.4, Y/Hmax = 1.5 and b/D = 0.1 for a single row of piles. Further, the second row of piles' inclusion resulted in improved attenuation characteristics of conical pile head breakwater (CPHB) with the least Kt of 0.582 at an optimal B/D of 0.4. The performance of the CPHB is compared with the theoretical solutions of conventional pile breakwater. The results indicate that the introduction of pile head on conventional pile breakwater is beneficial in improving wave attenuation. A set of empirical equations is developed based on the experimental values for quick prediction of Kt and Kr. The estimated values of Kt and Kr are in line with the experimental data with a coefficient of determination (R2) of 0.91 and 0.90, respectively. The overall performance of the CPHB is found to be promising as a potential coastal protection structure. © 2021 Elsevier LtdItem Numerical Modelling of an Innovative Conical Pile Head Breakwater(MDPI, 2022) Hunasanahally Sathyanarayana, A.H.; Suvarna, P.S.; Umesh, P.; Shirlal, K.G.; Bihs, H.; Kamath, A.When moderate wave activity at the shoreline is acceptable, pile breakwaters can serve as an alternative to conventional breakwaters. Increasing the size of the pile breakwater in the vicinity of the free surface increases the hydraulic efficiency, as most of the wave energy is concentrated around the free surface. Therefore, a conical pile head breakwater (CPHB) is proposed in the present study by gradually widening the diameter of the piles towards the free surface. Using the open-source computational fluid dynamics (CFD) model REEF3D, the transmission, reflection, and dissipation characteristics of the CPHB with monochromatic and irregular waves are examined. The investigation is carried out for both perforated and non-perforated CPHBs using monochromatic waves, and the numerical results are validated using experimental data. Further, optimally configured non-perforated and perforated CPHBs are investigated numerically by subjecting them to irregular waves using the Scott–Wiegel spectrum. The wave attenuation characteristics of the CPHBs are found to be better with irregular waves compared to monochromatic waves. With irregular waves, the minimum transmission coefficients for non-perforated and perforated CPHBs are 0.36 and 0.34, respectively. Overall, the CPHB appears to be a potential solution for coastal protection. © 2022 by the authors.Item Investigation on innovative pile head breakwater for coastal protection(SAGE Publications Ltd, 2024) Hunasanahally Sathyanarayana, A.H.; Suvarna, P.S.; Umesh, P.; Shirlal, K.G.Coastal erosion is a global concern that has been augmenting due to the natural evolution of beaches, human activities and sea-level rise. One of the eco-friendly shore protection methods is to dissipate the wave energy by constructing offshore breakwaters. Conical pile head breakwater (CPHB) is one of the eco-friendly innovative offshore structures consisting of closely spaced piles with an enlarged cross-sectional area (conical pile head) in the vicinity of the free surface. In the present study, perforations are incorporated over the conical pile head to achieve higher efficiency by promoting energy dissipation. The influence of the perforations on the performance characteristics, namely wave transmission (Kt), wave reflection (Kr) and energy dissipation (Kd) of the perforated CPHB is comprehensively investigated through physical model studies. The effect of perforations and their distribution around the pile head (Pa), percentage of perforation (P) and size of perforations (S/D) on the wave attenuation characteristics are evaluated to arrive at an optimum configuration. The study is carried out under monochromatic waves of varying wave height (0.06–0.16 m) and wave period (1.4–2 s) at different depths of water (0.35, 0.40 and 0.45 m). A minimum Kt of 0.58 associated with Kr of 0.26 and Kd of 0.78 is obtained with an optimum configuration of Pa = 50%, P = 19.2% and S/D = 0.25. The Kt of the proposed CPHB is about 19 to 35% lesser than that of the perforated hollow pile breakwater under matching test conditions. Overall, providing the perforations is found to be effective in enhancing the wave attenuation capability by up to 12.4%. Further, empirical equations are formulated and validated with the experimental data. The empirical equations estimate the Kt and Kr values accurately with a high coefficient of determination (R2≥ 0.90). © IMechE 2023.