Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Microstructure evolution and mechanical properties of friction stir welded AA6061/rutile composite(Institute of Physics Publishing helen.craven@iop.org, 2019) Prabhu B, S.R.; Shettigar, A.K.; Herbert, M.A.; Rao, S.S.Present study explores the Friction stir welding (FSW) of rutile reinforced AA6061matrix composite using various combination of tool traverse speeds (60, 75 and 90 mm min-1), rotational speeds (750, 1000 and 1250 rpm) and tool pin profiles (Threaded cylindrical and Square profiled pin). FSW process variables have significant impact in controlling the mechanical properties of the joint by limiting the welding defects. It has been inferred from the study that tool rotational speed and tool traverse speed majorly affects the microstructure, joint quality, hardness and joint strength. The weld area showed the presence of four distinct regions usually found in FSW of aluminium matrix composites. The weld region exhibited fine equiaxed grains and uniformly distributed tiny reinforced rutile particles. Tool having square profiled pin shows improved joint properties in comparison with tool having threaded cylindrical pin. © 2019 IOP Publishing Ltd.Item Microstructure and mechanical properties of rutile-reinforced AA6061 matrix composites produced via stir casting process(Nonferrous Metals Society of China B12 Fuxing Road Beijing 100814, 2019) Prabhu B, S.R.; Shettigar, A.K.; Herbert, M.A.; Rao, S.S.A novel process of fabricating aluminium matrix composites (AMCs) with requisite properties by dispersing rutile particles in the aluminum matrix was studied. A novel bi-stage stir casting method was employed to prepare composites, by varying the mass fractions of the rutile particles as 1%, 2%, 3% and 4% in AA6061 matrix. The density, tensile strength, hardness and microstructures of composites were investigated. Bi-stage stir casting method engendered AMCs with uniform distribution of the reinforced rutile particles in the AA6061 matrix. This was confirmed by the enhancement of the properties of AMCs over the parent base material. Rutile-reinforced AMCs exhibited higher tensile strength and hardness as compared with unreinforced parent material. The properties of the composites were enhanced with the increase in the mass fraction of the rutile particles. However, beyond 3 wt.% of rutile particles, the tensile strength decreased. The hardness and tensile strength of the AMCs reinforced with 3 wt.% of rutile were improved by 36% and 14% respectively in comparison with those of matrix alone. © 2019 The Nonferrous Metals Society of ChinaItem Experimental assessment of FSW process to join AA6061/Rutile composite and parametric optimization using TGRA(IOP Publishing Ltd, 2021) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.Present study is focused on investigating the effect of various friction stir welding (FSW) process variables on AA6061/Rutile composites welding quality. FSWof composites was performed considering tool geometry (Tg), welding speed (Ws) and rotational speed (Ns) as ideal parameters for multi-response optimization. Experiments were designed based on the L9 orthogonal array. Analysis of variance (ANOVA) was utilized to evaluate the effects of these welding process variables on output responses namely hardness and ultimate tensile strength (UTS). Main effects plots were drawn to found out the optimal levels of these process parameters. Multi-response optimization of the welding process has been performed using Taguchi's grey relational analysis (TGRA). Analysis revealed that welding speed of 90mmmin-1, a tool with a square pin, and rotational speed of 1000 rpm produced an FSWjoint with excellent mechanical properties. Microstructure analysis revealed that refinement in the grain structure and redistribution of reinforced particles helped in improved joint strength. © 2021 IOP Publishing Ltd.Item Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique(Sharif University of Technology, 2022) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.In the friction stir welding process, preferred joint property is vastly reliant on the selection of optimal welding conditions. The present study aims to use the Taguchi technique to find the optimal process conditions for achieving superior Ultimate Tensile Strength (UTS) in friction stir welded Aluminum Matrix Composite (AMC) joints. AMCs reinforced with rutile particles which have a potential application in the aerospace, automotive, and marine industries are used in the present work. Taguchi parametric design technique was used to identify the effect of rotational speed, tool traverse speed, and tool geometry on joint strength. Taguchi approach confined the optimum level of process variables and these variables were optimized. The investigation showed that the parameters within the selected value range will seriously affect the output. The predicted value of the output response was 155.48 MPa, which was validated by further experiments using the optimum process variables. Analysis Of Variance (ANOVA) results indicated that the UTS of the composite joint is mainly affected by the tool traverse speed followed by rotational speed, and tool geometry. The microstructural study unveiled that grain size is dependent on process variables and finer grains offer better joint properties. © 2022 Sharif University of Technology. All rights reserved.Item Experimental investigation and parametric optimization of FSW of mineral-reinforced AA6061 matrix composite(Institute of Physics, 2024) Prabhu B, S.R.; Herbert, M.A.In this work, rutile reinforced AA 6061 matrix composites were joined using friction stir welding and the process variables were optimized using Taguchi L27 orthogonal design of experiments. The rotational speed, axial force and tool tilt angle were the parameters taken into consideration. The optimum process variables were determined with reference to tensile strength, impact strength and hardness of the joint. The predicted optimal value of output responses was confirmed by conducting the confirmation run using optimum parameters. The optimal process variables combination values that resulted in improved mechanical properties were observed at a tool rotational speed of 1400 rpm, a tool tilt angle of 2 degree, and an axial force of 3KN. Scanning electron microscopy (SEM) analysis were used to probe the microstructures. © 2024 The Author(s). Published by IOP Publishing Ltd.