Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Microstructure and hardness of friction stir welded aluminium-copper matrix-based composite reinforced with 10 wt-% SiCp(Maney Publishing, 2014) Shettigar, A.; Veeresh Nayak, C.; Herbert, M.A.; Rao, S.S.In the present work, an attempt has been made to join aluminium-copper matrix-based composite reinforced with 10 wt-% SiCp, by the friction stir welding technique, at different combinations of tool rotational speed (710, 1000 and 1400 rev mm1) and welding speed (50, 63 and 80 mm min1) using square profiled friction stir welding tool. Welding parameters play a predominant role in improving the mechanical strength by minimising the defects. A good number of defect free joints were obtained at various combinations of rotational speed and welding speed. It has been observed that, rotational speed and welding speed have strong influence on microstructure, Vickers hardness and quality of welds. © W. S. Maney &Son Ltd 2014.Item Microstructure evolution and mechanical properties of friction stir welded AA6061/rutile composite(Institute of Physics Publishing helen.craven@iop.org, 2019) Prabhu B, S.R.; Shettigar, A.K.; Herbert, M.A.; Rao, S.S.Present study explores the Friction stir welding (FSW) of rutile reinforced AA6061matrix composite using various combination of tool traverse speeds (60, 75 and 90 mm min-1), rotational speeds (750, 1000 and 1250 rpm) and tool pin profiles (Threaded cylindrical and Square profiled pin). FSW process variables have significant impact in controlling the mechanical properties of the joint by limiting the welding defects. It has been inferred from the study that tool rotational speed and tool traverse speed majorly affects the microstructure, joint quality, hardness and joint strength. The weld area showed the presence of four distinct regions usually found in FSW of aluminium matrix composites. The weld region exhibited fine equiaxed grains and uniformly distributed tiny reinforced rutile particles. Tool having square profiled pin shows improved joint properties in comparison with tool having threaded cylindrical pin. © 2019 IOP Publishing Ltd.Item Experimental assessment of FSW process to join AA6061/Rutile composite and parametric optimization using TGRA(IOP Publishing Ltd, 2021) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.Present study is focused on investigating the effect of various friction stir welding (FSW) process variables on AA6061/Rutile composites welding quality. FSWof composites was performed considering tool geometry (Tg), welding speed (Ws) and rotational speed (Ns) as ideal parameters for multi-response optimization. Experiments were designed based on the L9 orthogonal array. Analysis of variance (ANOVA) was utilized to evaluate the effects of these welding process variables on output responses namely hardness and ultimate tensile strength (UTS). Main effects plots were drawn to found out the optimal levels of these process parameters. Multi-response optimization of the welding process has been performed using Taguchi's grey relational analysis (TGRA). Analysis revealed that welding speed of 90mmmin-1, a tool with a square pin, and rotational speed of 1000 rpm produced an FSWjoint with excellent mechanical properties. Microstructure analysis revealed that refinement in the grain structure and redistribution of reinforced particles helped in improved joint strength. © 2021 IOP Publishing Ltd.Item Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique(Sharif University of Technology, 2022) Prabhu B, S.R.; Shettigar, A.; Herbert, M.A.; Rao, S.S.In the friction stir welding process, preferred joint property is vastly reliant on the selection of optimal welding conditions. The present study aims to use the Taguchi technique to find the optimal process conditions for achieving superior Ultimate Tensile Strength (UTS) in friction stir welded Aluminum Matrix Composite (AMC) joints. AMCs reinforced with rutile particles which have a potential application in the aerospace, automotive, and marine industries are used in the present work. Taguchi parametric design technique was used to identify the effect of rotational speed, tool traverse speed, and tool geometry on joint strength. Taguchi approach confined the optimum level of process variables and these variables were optimized. The investigation showed that the parameters within the selected value range will seriously affect the output. The predicted value of the output response was 155.48 MPa, which was validated by further experiments using the optimum process variables. Analysis Of Variance (ANOVA) results indicated that the UTS of the composite joint is mainly affected by the tool traverse speed followed by rotational speed, and tool geometry. The microstructural study unveiled that grain size is dependent on process variables and finer grains offer better joint properties. © 2022 Sharif University of Technology. All rights reserved.Item Optimization of process parameters for friction stir processing (FSP) of AA8090/boron carbide surface composites(Springer Science and Business Media Deutschland GmbH, 2024) Adiga, K.; Herbert, M.A.; Rao, S.S.; Shettigar, A.K.Friction Stir Processing (FSP) is an innovative and promising technique for microstructure refinement, material property enhancement, and surface composite production. The current study describes the fabrication of AA8090/boron carbide surface composites (SCs) by FSP. Experimental studies were conducted by varying the FSP parameters, specifically the rotational speed (800–1400 rpm), traverse speed (25–75 mm/min), and groove width (1–1.8 mm). Ultimate Tensile Strength (UTS), Surface Roughness (SR), and Percentage Elongation (El) were used as response measures. Experiments were planned based on the central composite design (CCD) of Response Surface Methodology (RSM) and a mathematical relationship between the input parameters and UTS, SR and El, and were obtained by RSM. The model adequacy was tested using analysis of variance (ANOVA). The models enabled the examination of individual and interaction effects of input parameters on the UTS, SR, and El of the produced SCs. AA8090/boron carbide SC strength was optimal of 366 MPa at 800 rpm, 75 mm/min, and 1.8 mm and optimal 21.13% elongation at 1400 rpm, 25 mm/min, and 1 mm. A smoother surface with 0.82-μm roughness was optimal at 1400 rpm, 25 mm/min, and 1.2 mm. The present study uses the FSP method to synthesize near-net-shaped SCs without further machining by systematically selecting process parameters. The study shows that the increase in rotational speed during AA8090/boron carbide SC fabrication produces composites with a good surface finish, lower UTS, and good ductility. However, the increase in the other two parameters, namely, traverse speed and groove width, produces low ductile composites with rougher surfaces and higher strengths. Graphical abstract: (Figure presented.) © International Institute of Welding 2024.Item Control factor optimization for friction stir processing of AA8090/SiC surface composites(Elsevier B.V., 2024) Adiga, K.; Herbert, M.A.; Rao, S.S.; Shettigar, A.K.Friction Stir Processing is a state-of-the-art technology for microstructure refinement, material property enhancement, and surface composites fabrication. This investigation concentrates on AA8090/SiC surface composites produced via friction stir processing. Experiments were conducted by varying the following friction stir processing parameters: Tool rotational speed (800–1400 rpm), Tool traverse speed (25–75 mm/min), and Groove width (1.0–1.8 mm). Response measures encompassed Ultimate Tensile Strength and surface roughness. Central Composite Design of Response Surface Methodology designed the experiments and mathematical relationships established between input parameters and ultimate tensile strength and surface roughness. Analysis of variance was used to test the model's adequacy. The models examined individual and interaction effects of input factors on ultimate tensile strength and surface roughness of surface composites. A combinations of input parameters was identified that yields the maximum ultimate tensile strength and minimum surface roughness. The current work employs the friction stir processing approach to synthesis near-net-shaped surface composites without additional machining by systematically optimizing process parameters. Results indicate that increasing tool rotational speed produces well-finished AA8090/SiC surface composites with decreased strength. In contrast, increased tool traverse speed and groove width generate surface composites with rougher surfaces and higher strength. Surface and contour plots further explored the influence of parameter interactions on responses. © 2024 The AuthorsItem Experimental investigation and parametric optimization of FSW of mineral-reinforced AA6061 matrix composite(Institute of Physics, 2024) Prabhu B, S.R.; Herbert, M.A.In this work, rutile reinforced AA 6061 matrix composites were joined using friction stir welding and the process variables were optimized using Taguchi L27 orthogonal design of experiments. The rotational speed, axial force and tool tilt angle were the parameters taken into consideration. The optimum process variables were determined with reference to tensile strength, impact strength and hardness of the joint. The predicted optimal value of output responses was confirmed by conducting the confirmation run using optimum parameters. The optimal process variables combination values that resulted in improved mechanical properties were observed at a tool rotational speed of 1400 rpm, a tool tilt angle of 2 degree, and an axial force of 3KN. Scanning electron microscopy (SEM) analysis were used to probe the microstructures. © 2024 The Author(s). Published by IOP Publishing Ltd.