Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
19 results
Search Results
Item Electrolytic preparation of cyclic multilayer Zn-Ni alloy coating using switching cathode current densities(2010) Venkatakrishna, K.; Hegde, A.C.Cyclic multilayer alloy (CMA) coating of Zn-Ni was developed on mild steel using single bath technique, by proper manipulation of cathode current densities. The thickness and composition of the individual layers were altered precisely and conveniently by cyclic modulation of cathode current densities. Multilayer coatings, having sharp change in compositions were developed using square current pulses. Gelatin and sulphanilic acid (SA) acid were used as additives. Laminar deposits with different configurations were produced, and their corrosion behaviors were studied, in 5% NaCl solution by electrochemical methods. It was observed that the corrosion resistance of CMA coating increased progressively with number of layers (up to certain optimal numbers) and then decreased. Cyclic voltammetry study demonstrated the role of gelatin and SA in multilayer coating. The coating configuration has been optimized for the peak performance against corrosion. The substantial decrease of corrosion rate, in the case of multilayer coatings was attributed to the changed intrinsic electric properties, evidenced by Electrochemical Impedance Spectroscopy (EIS) study. The surface morphology and its roughness were examined by Atomic Force Microscopy (AFM). The surface and cross-sectional view of coatings were examined, using Scanning Electron Microscopy (SEM). X-ray photoelectron spectrum (XPS) study was carried out for surface analysis. The relative performance of pure Zn, monolithic and CMA coatings were compared and discussed. © 2010 Springer Science+Business Media B.V.Item Optimization of bright zinc-nickel alloy bath for better corrosion resistance(2010) Yogesha, S.; Hegde, A.C.Optimization of an acid chloride bath for electrodeposition of smooth Zn-Ni alloy on to mild steel was studied using thiamine hydrochloride (THC) as brightener. The influence of deposition current density, temperature, composition, and corrosion properties of Zn-Ni alloy coatings was investigated. The effect of bath composition and operating parameters on deposits characters like composition, micro-hardness, thickness and adhesions were tested. Under no conditions of current density employed in the present study, the anomalous type of co-deposition has changed to normal type. Electrolytically deposited Zn-Ni alloys were characterized by electrochemical AC and DC techniques. The experimental results revealed that coatings having ? 3.16 wt. % Ni at 3.0 A/dm2 was the most corrosion resistant. The better corrosion resistance at optimal current density was attributed to the formation of n-type semiconductor film at the interface using Mott-Schottky (M-S) analysis. The effect of THC on plating process was investigated through cyclic voltammetry techniques. X-ray diffraction (XRD) studies of the coatings showed the presence of ?-Phase with composition of Ni5Zn21, responsible for it extended orrosion resistance. The change in the surface morphology of the coatings, with current density was analyzed using scanning electron microscopy (SEM). © 2010 Indian Institute of Metals.Item Electrodeposition of Zn-Ni, Zn-Fe and Zn-Ni-Fe alloys(2010) Hegde, A.C.; Venkatakrishna, K.; Eliaz, N.Zn-Fe, Zn-Ni and Zn-Ni-Fe coatings were electrodeposited galvanostatically on mild steel from acidic baths (pH 3.5) consisted of ZnCl2, NiCl2, FeCl2, gelatin, sulfanilic (p-aminobenzenesulfonic) acid and ascorbic acid. Cyclic voltammetry showed that the effect of gelatin was more pronounced than that of sulfanilic acid, and that the deposition of the ternary alloy behaved differently from the deposition of the binary alloys. In all three systems, the Faradaic efficiency was higher than 88%, the rate of Zn deposition was heavily influenced by mass-transport limitation at high applied current densities, and the deposition was of anomalous type. For each applied current density, the concentrations of Ni and Fe in the ternary alloy were higher than the corresponding concentrations in the binary alloys. The hardness of Zn-Ni coatings was the highest, while that of Zn-Fe coatings was the lowest. The Zn-Ni-Fe coatings were the smoothest, had distinguished surface morphology, and contained ZnO in the bulk, not just on the surface. The lowest corrosion rate in each alloy system (214, 325 and 26?m year-1 for Zn-Ni, Zn-Fe and Zn-Ni-Fe, respectively) was characteristic of coatings deposited at 30, 30 and 40mAcm-2, respectively. The higher corrosion resistance of the ternary alloy was also reflected by a higher corrosion potential, a higher impedance and a higher slope of the Mott-Schottky line. The enhanced corrosion behavior of the ternary alloy was thus attributed to its chemical composition, phase content, roughness and the synergistic effect of Ni and Fe on the n-type semiconductor surface film. © 2010 Elsevier B.V.Item Development of nano-structured cyclic multilayer Zn-Ni alloy coatings using triangular current pulses(2011) Bhat, R.S.; Hegde, A.C.Cyclic multilayer alloy (CMA) deposits of Zn-Ni were developed on mild steel from sulphate bath having thiamine hydrochloride (THC) and citric acid (CA) as additives. CMA coatings were developed galvanostatically using triangular current pulses, under different conditions of cyclic cathode current density (CCCD's) and number of layers. The corrosion behaviors of the coatings were evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy methods, and were compared with that of monolayer Zn-Ni alloy of same thickness. At optimal configuration, CMA coating represented as, (Zn-Ni)2.0/5.0/300 was found to exhibit ?40 times better corrosion resistance compared to monolayer alloy, (Zn-Ni)3.0. Cyclic voltammetry study demonstrated that THC and CA have improved the appearance of the deposit by complexation with metal ions. The corrosion protection efficacy of CMA coatings was attributed to the difference in phase structure of the alloy in successive layers, evidenced by XRD analysis. The formation of multilayer and corrosion mechanism was analyzed by Scanning Electron Microscopy (SEM) study. © 2011 Allerton Press, Inc.Item Effect of current density on deposit characters of Zn-Co alloy and their corrosion behaviors(2011) Yogesha, S.; Bhat, U.; Hegde, A.C.Electrodeposition of Zn-Co alloy onmild steel has been studied, using thiamine hydrochloride (THC) as an additive. The effect of current density on deposit characters, such as chemical composition, thickness, hardness, phase structure, and surface morphology has been investigated. The electrochemical corrosion study revealed that the coating with 1.69 wt. % Co, deposited at 3.0 A dm-2 exhibited the best corrosion stability. Scanning electron microscopy (SEM), energy depressive spectroscopy (EDX), and X-ray diffraction (XRD) analyses were used to study the surface morphology, chemical composition, and phase structure of the coatings. The results were discussed focusing the effect of THC on coating characters. Copyright © Taylor & Francis Group, LLC.Item Synergistic effect of gelatin and glycerol on electrodeposition of Zn-Ni alloy(2013) Rao, V.R.; Hegde, A.C.The use of organic compounds which improves corrosion resistance has attracted growing interest in electroplating technology. In this direction, this article presents the experimental results of electrodeposition of Zn-Ni alloy on mild steel (MS) from acid chloride bath using gelatin and glycerol as additives. The bath composition and operating parameters have been optimized by the conventional Hull cell method. The effect of gelatin and glycerol, individually and in combination on the deposition process, was identified by a cyclic voltammetry (CV) study at different scan rates. Bright deposition of Zn-Ni alloy was found at optimal current density (c.d.) due to the preferential deposition of gelatin and glycerol by controlling the Ni content of the alloy. The CV study demonstrated that alloy deposition is diffusion controlled when additives were used individually and is adsorption controlled when used in combination. Corrosion behaviors at different current densities (c.d.s) were evaluated by potentiodynamic polarization and electrochemical impedance (EIS) methods. The surface morphology and phase structure of the coatings were analyzed by field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) studies. The experimental results revealed that both gelatin and glycerol have synergistic effects in improving the electrocrystallization process and, hence, the corrosion stability of the coatings. At an optimal c.d. (3.0 A dm-2), the Zn-Ni alloy coating showed peak performance against corrosion with the least corrosion rate. Better corrosion protection at optimal c.d., which was attributed to specific Zn(101), ?-(411,330), and Zn(103) reflections, is evidenced by the XRD study. © 2013 The Minerals, Metals & Materials Society and ASM International.Item Role of cadmium on corrosion resistance of Zn-Ni alloy coatings(Allerton Press Inc. journals@allertonpress.com, 2014) Rao, V.R.; Hegde, A.C.Cadmium (Cd) catalyzed Zn-Ni alloy plating has been accomplished galvanostatically on mild steel (MS) using gelatin and glycerol as additives. The effect of addition of Cd into Zn-Ni bath has been examined in terms of nickel (Ni) content and corrosion resistance of Zn-Ni-Cd ternary alloy coatings. The process and product of electrolysis under different concentrations of additives and Cd have been investigated by cyclic voltammetry (CV). The effects of current density (c.d.) on Ni content of the alloy have been studied by spectrophotometric method, supported by EDX analysis. The deposition has been carried out under different concentrations of Cd ranging from 0.004 to 0.1 M. The corrosion rates (CR) of Zn-Ni alloy coatings have been found to decrease drastically with addition of Cd. It has been also revealed that the CR of binary Zn-Ni alloy coatings decreased with the increase of Cd concentration only up to a certain optimal concentration, i.e., up to 0.02 M, and then remained unchanged. An effort to change the anomalous type of codeposition into normal one by changing the molar ratios of the metal ions, i.e. [Cd2+]/[Ni2+] as 0.01, 0.05 and 0.25 has remained futile. CV study demonstrated an important role of Cd in mutual depositions of Zn2+ and Ni2+ ions by its preferential adsorption, thus leading to the increased Ni content of the alloy. The bath composition and operating parameters have been optimized for deposition of bright and uniform Zn-Ni-Cd alloy coatings. Changes in the surface morphology and phase structure of Zn-Ni alloy coatings due to addition of Cd has been confirmed by Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) study respectively. Experimental investigations so as to identify the role of Cd in codeposition Zn-Ni alloy coatings have been carried out and the results are discussed. © 2014 Allerton Press, Inc.Item Electrodeposition and electro-catalytic study of nanocrystalline Ni-Fe alloy(Elsevier Ltd, 2014) Ullal, Y.; Hegde, A.C.This paper presents the electrodeposition protocol for development of a stable, inexpensive and efficient electrode material for water splitting reaction. Nanocrystalline Ni-Fe alloy coatings were deposited on copper electrode from acidic bath, at different cathode current densities (c.d). Coatings were tested for their electro-catalytic behaviours, namely for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in 6 M KOH by cyclic voltammetry and chrono-potentiometry techniques. Experimental results demonstrated that these coatings can be used as potential material for water electrolysis. The corrosion stability of these coatings has also been tested in their working conditions (6 M KOH) by DC polarization method. The deposition conditions of Ni-Fe alloy were optimized for peak performance for both electro-catalytic reactions and corrosion stability. Ni-Fe alloy coatings deposited towards low and high c.d limits were found to be the better materials for OER and HER, respectively from same electrolytic solution. Further, Ni-Fe coating deposited at 6.0 Ad m-2 was found to be the most corrosion resistant. The structure-property relationship of electrodeposited coatings has been discussed by exploring PXRD, EDX and FESEM study. © 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Item Synthesis and characterization of Ni-P-Ag composite coating as efficient electrocatalyst for alkaline hydrogen evolution reaction(Elsevier Ltd, 2016) Elias, L.; Hegde, A.C.The effect of addition of silver nanoparticle sol (SNS) into Ni-P plating bath was studied in terms of the variation in electrocatalytic behavior of the developed coatings in 1.0 M KOH. Ni-P-Ag composite coating was achieved through direct electrolysis by adding a known quantity of the conventionally prepared SNS into Ni-P bath. Ni-P-Ag coatings electrodeposited galvanostatically on copper under different conditions of the bath was used as electrode material for alkaline hydrogen evolution reaction (HER). The optimal concentration of the SNS required for maximum electrocatalytic activity towards HER was obtained by adding different volumes of SNS (from 0 to 50 mL L?1) into the bath. The HER efficiency of the test electrodes in 1.0 M KOH medium was examined using cyclic voltammetry (CV) and chronopotentiometry (CP) techniques. The kinetics of HER on the alloy and composite electrodes were established through Tafel polarization and electrochemical impedance spectroscopy (EIS) analyses. Energy dispersive spectroscopy (EDS) was used to confirm the incorporation of Ag nanoparticles into the Ni-P alloy matrix. The microstructure and morphology of the alloy and composite coatings were analyzed by Scanning Electron Microscopy (SEM). A significant improvement in the electrocatalytic property of nano-Ag derived composite coatings was found, and was attributed to the enhanced electroactive sites of Ag particles. Deposition conditions to maximize the electrocatalytic activity of Ni-P-Ag nanocomposite coatings in relation to traditional Ni-P alloy coatings was arrived, and results are discussed. © 2016Item Electrodeposition of Sn-Ni Alloy Coatings for Water-Splitting Application from Alkaline Medium(Springer Boston, 2017) Shetty, S.; Hegde, A.C.In this work, Sn-Ni alloy coatings were developed onto the surface of copper from a newly formulated electrolytic bath by a simple and cost-effective electrodeposition technique using gelatin as an additive. The electrocatalytic behavior of coatings deposited at different current densities (c.d.’s) for water-splitting applications, in terms of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), has been researched. The experimental results showed that the electrocatalytic activity of Sn-Ni coatings has a close relationship with its composition, surface morphology, and phase structure depending on the c.d. used, supported by scanning electron microscopy (SEM-EDX) and X-ray diffraction (XRD) analyses. Cyclic voltammetry and chronopotentiometry techniques have demonstrated that Sn-Ni alloy deposited at 4.0 A dm?2 (having 37.6 wt pct Ni) and 1.0 A dm?2 (having 19.6 wt pct Ni) exhibit, respectively, the highest electrocatalytic behavior for HER and OER in 1.0-M KOH solution. Sn-Ni alloy coatings were found to be stable under working conditions of electrolysis, confirmed by electrochemical corrosion tests. High electrocatalytic activity of Sn-Ni alloy coatings for both HER and OER is specific to their composition, surface morphology, and active surface area. © 2016, The Minerals, Metals & Materials Society and ASM International.