Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
12 results
Search Results
Item Development of multilayer Sn-Ni alloy coating by pulsed sonoelectrolysis for enhanced corrosion protection(Royal Society of Chemistry, 2016) Shetty, S.; Mohamed, M.J.; Bhat, D.; Hegde, A.C.Multilayer Sn-Ni alloy coating has been developed electrochemically on mild steel using an ultrasound effect, as a tool to modulate mass transfer process at electrical double layer, during deposition. Sn-Ni coatings having alternate layers of alloys of different compositions were developed on a nano/micrometric scale by pulsing sonicator ON (tON) and OFF (tOFF), periodically. The composition modulated multilayer alloy (CMMA) Sn-Ni coatings have been deposited by inducing the ultrasound field periodically at optimal current density. Corrosion performances of ultrasound-assisted multilayer Sn-Ni alloy coatings have been evaluated by electrochemical methods. Corrosion data revealed that CMMA Sn-Ni coating, developed using pulsed ultrasonic field and having 150 layers, represented as (Sn-Ni)2/2/150, is the most corrosion resistant, compared to its monolayer alloy coatings developed by both with/without ultrasound effect. Corrosion protection efficacy of multilayer coatings was found to be decreased at high degree of layering due to diffusion of layers. Improved corrosion resistance of multilayer Sn-Ni coatings is attributed to an increase in the number of layers, or interfaces separating alloys of the same metals, but of different composition, surface morphologies and phase structures, supported by energy dispersive spectroscopy, field emission scanning electron microscopy and X-ray diffraction study, respectively. The better corrosion protection of CMMA Sn-Ni coatings, compared to monolayer counterparts, is attributed to an increase in the number of layers, hence phase boundaries between layers, and experimental results are discussed. © 2018 The Royal Society of Chemistry.Item Electrochemical studies on the corrosion resistance of Zn–Ni–Co coating from acid chloride bath(Springer, 2020) Bhat, R.S.; Manjunatha, K.B.; Prasanna Shankara, R.; Venkatakrishna, K.; Hegde, A.C.Anticorrosive deposits are a valuable approach to defending against corrosion from mild steel structures/machinery equipment. The Zn–Ni–Co coating has been deposited on low carbon steel surfaces using environment friendly optimized acidic chloride bath with ZnCl2·6H2O, NiCl2·6H2O, CoCl2·6H2O, sulphanilic acid (C6H7NO3S) and gelatin (C6H8O6). The standard Hull cell technique has been adopted for the optimization of bath components and experimental conditions, for the superior corrosion resistant coating. The corrosion test with potentiodynamic polarization method was performed to investigate the role of pH on the film quality and corrosion performances of the films. Further, the effect of current densities on corrosion resistance, thickness and hardness, have been investigated. Cyclic voltammetry technique has been used to test the electrochemical properties of the Zn–Ni–Co coating in acidic solutions. The results revealed that the increase in the current density favoured the increase in Ni and Co content in the deposit, showed higher corrosion resistance and higher cathodic current efficiency. The structural and morphological characteristics of the alloy coating have been obtained through scanning electron microscopy and X-ray diffraction techniques. The atomic force microscope was used to examine the topographic structure of the coating. X-ray Photoelectron spectroscopy was used to determine the chemical composition of alloy coatings and verified by energy dispersive X-ray analysis. The results indicate that a new and low-cost chloride bath for Zn–Ni–Co coating exhibit superior corrosion resistance properties and can be implement in various industrial applications such as automobiles, machine tools etc.[Figure not available: see fulltext.]. © 2020, Springer-Verlag GmbH Germany, part of Springer Nature.Item Compositionally Modulated Multilayered Zn-Co Deposits for Better Corrosion Resistance(Springer, 2020) Bhat, R.S.; Venkatakrishna, K.; Nayak, J.; Hegde, A.C.Zn-Co compositionally modulated multilayer alloy (CMMA) deposits have been developed onto mild steel using single bath technique. Multilayer alloy coatings have been galvanostatically produced using square current pulses. The switched cathode current density and number of layers have been designed for improved corrosion resistance. Experimental data revealed that multilayer coating with 120 layers at 10/30 mA/cm2 demonstrated ~ 125 times higher resistance to corrosion than monolayer alloy coating of the same thickness. The improved corrosion resistance of multilayer coatings is due to small changes in the wt.% cobalt, leading to change in the phase structure of deposit in alternate layers. The defects and failures occurring in a single layer in the deposition process are covered by the alternatively deposited coating layers. Therefore, the direction of the corrosive agent is extended or blocked. Further, the better corrosion resistances afforded by Zn-Co CMMA coatings were explained through changes in electronic properties at the interface, supported by Mott-Schottky’s plot. However, the decrease of corrosion resistance at a high degree of layering is attributed to the less relaxation time for redistribution of solutes in the diffusion layer, during plating. Potentiodynamic polarization and electrochemical impedance data showed its good protection ability. The enhanced corrosion resistance of multilayered deposits is due to small change in cobalt content, leading to alter the phase structure of the alternate-layers of the deposits. The structural morphology and the topographical structure of the coating were analyzed by scanning electron microscopy and atomic force microscopy. Evaluation of the chemical composition of the alloy coatings was carried out by x-ray photoelectron spectroscopy. © 2020, ASM International.Item Development of corrosion-resistant Ni–Mo coatings from low-concentration bath: effect of magnetoconvection(Taylor and Francis Ltd., 2021) Gonsalves, C.N.; Hegde, A.C.The phenomenon of magnetoconvection has been used effectively to improve the corrosion protection efficacy of Ni–Mo coatings from a low-concentration bath. Experimental studies demonstrated that magnetoelectrodeposited (MED) coatings developed under parallel (Item Effect of Potassium Sodium Tartrate on Composition and Corrosion Performance of Ni–W Alloy Coatings(Pleiades journals, 2021) Neethu Raveendran, M.; Hegde, A.C.Abstract: In this communication, the effect of potassium sodium tartrate as complexing agent on the composition, phase structure, surface morphology, and corrosion performance of electrodeposited nickel-tungsten alloy coatings is reported. The deposition conditions were optimized for the best performance of the coatings against corrosion. Ni–W coatings were developed at different current densities and their corrosion behaviour was studied. Compositional data revealed that the noble metal tungsten content of the alloy decreased with growing cathodic current densities. Characteristics responsible for the best anticorrosion performance of Ni–W alloy coatings were compared with those of a citrate bath, earlier reported by the authors and their colleagues. The experimental study in this paper demonstrated an inverse dependency of the W content of Ni–W alloy on a current density, compared to that in a citrate bath. The X-ray diffraction study revealed that anticorrosion performance is driven by the W content of the alloys, not by the current density at which they are deposited. An inverse dependency of the W content on a current density, is discussed in the light of the theory of the mass transfer controlled M-complex ions (where M = W/Ni), associated in the deposition. It is supposed that a decrease/an increase of the W content in a tartrate or a citrate bath with the current density is afforded by a lower limiting current density (iL) of the W/Ni-complex ion, depending on the stability of the M-tartrate/citrate complex formed. The experimental results were discussed with the help of different analytical techniques, like scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffractometry. © 2021, Allerton Press, Inc.Item Electrodeposition of multilayer NiW alloy coating for improved anticorrosion performance(Springer, 2021) Raveendran, M.N.; Hegde, A.C.The attractiveness of electroplating linked to cathodic current density (CD) has tried to exploit here to the development of coatings of high corrosion resistance. Multilayer NiW alloy coatings of better anticorrosion performance were electrodeposited from a tartrate bath by periodic pulsing of CD between two values, during the process of deposition. The multilayer coatings of different configurations, in terms of composition and thickness of individual layers were developed by proper modulation of amplitude and duration of the square current pulse, respectively. The deposition conditions were optimized for best performance of the coatings against corrosion. Our experimental study revealed that under optimal condition, multilayer NiW coating having (NiW)1.0/3.0/120 configuration is almost six times more corrosion resistant than its monolayer coating, deposited from same bath for same duration. The reason for improved corrosion performance in multilayer NiW alloy coating was explained in the light of effect of larger interfaces affected due to layered deposition and confirmed by scanning electron microscopy analysis, energy dispersive spectroscopy and X-ray diffraction study. The mechanism of corrosion responsible for its better performance, in relation to its monolayer coating is given, and results are discussed. © 2021, Indian Academy of Sciences.Item Anomalous codeposition of NiCo alloy coatings and their corrosion behaviour(Elsevier Ltd, 2022) Raveendran, M.N.; Hegde, A.C.Here, we report the electrodeposition NiCo alloy coatings from a new bath using the glycine, as additive. A bright and uniform coatings NiCo alloy have been developed at different current densities and their corrosion performances have been evaluated. The surface morphology, composition and phase structure of alloy coatings have been analyzed using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray diffraction (XRD) techniques, respectively. The compositional information of NiCo alloy coatings revealed that the proposed bath follows anomalous type of codeposition over range of current density studied (1.0–4.0 A dm−2), by demonstrating more Wt. % of Co in the deposits, than in the bath. A constant increase in the Wt. % of Ni with current density was found, supported by XRD analyses; and it may be attributed to the depletion of more readily depositable Co+2 ions at cathode film by following the principle of codeposition of NiCo alloy. The corrosion study revealed that NiCo alloy deposited at 4.0 A dm−2, represented as (NiCo) 4.0 A dm-2 coating is the most corrosion resistant compared to all other coatings. The highest corrosion stability of (NiCo) 4.0 A dm-2 alloy attributed to its highest Ni content (38.6 wt%) and increased surface smoothness, supported by EDS and SEM study. © 2022Item Electrodeposition of Zn–Co Coating and its Electrochemical Performance(Pleiades journals, 2022) Bhat, R.S.; Manjunatha, K.B.; Venkatakrishna, K.; Hegde, A.C.Abstract: We report the acid chloride bath based electroplating of Zn–Co alloy on low carbon steel (LCS). As additives, the sulphanilic acid (SA) and gelatin were used for electroplating. The bath exhibited an anomalous co-deposition with a higher deposition of Zn over nobler Co. The role of bath composition, current density, partial current density, pH, and temperature on thickness, hardness, and corrosion resistance of deposit was studied. The corrosion behavior in 3.5 wt % sodium chloride solution and electrochemical behavior in acid chloride solutions of Zn–Co alloy coatings were studied using the potentiodynamic polarization method and cyclic voltammetry technique respectively. Mott–Schottky plot with positive slope confirms the development of n-type semiconductor layer at the interface of substrate and coating, which results in superior corrosion resistance of coatings. The colorimetric method has been used to estimate the composition of the deposit and further verified by energy dispersive X-ray spectroscopy (EDX) technique. The surface features and the topographical structure of the alloy film were obtained by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The results indicate that the Zn–Co alloy films exhibited superior corrosion resistance with the lowest corrosion rate (138 µm y–1). Hence this alloy coating will find suitable applications in automobile and aerospace industries. © 2022, Pleiades Publishing, Ltd.Item Electrochemical Studies of Zn-Ni-Fe Alloy Coatings for Better Corrosion Resistance Applications(Springer, 2022) Bhat, R.S.; Munjunatha, K.B.; Bhat, S.I.; Venkatakrishna, K.; Hegde, A.C.Anti-corrosive alloy coatings are a valuable solution to the protection of low carbon steel structures/equipment against corrosion. The Zn-Ni-Fe coatings have been deposited galvanostatically on low carbon steel from an acid chloride bath. Sulfanilic acid and gelatin were used as additives for the homogeneity of the deposit. The Hull cell method has been used to optimize both bath constituents and plating conditions. The corrosion behavior of the coating films was examined with potentiodynamic polarization and the electrochemical impedance spectroscopy methods. The effects of current density, pH, and temperature on deposit properties like hardness, thickness, and corrosion rates were examined. The electrochemical characteristics of the Zn-Ni-Fe have been studied by the cyclic voltammetry technique. The morphology of the deposit was investigated with scanning electron microscopy and the surface roughness of the coating film was analyzed by atomic force microscopy. The Ni and Fe contents in the deposit were analyzed by colorimetric technique and cross-checked with energy-dispersive x-ray analysis. The capacitive reactance at the interface is attributed to the excellent corrosion resistance at optimal current density (40 mA cm−2) as indicated by the Nyquist plot with large polarization resistance. Furthermore, the positive slope of Mott-Schottky revealed that the semiconductor film at the interface is n-type. The results show that a new Zn-Ni-Fe alloy coating film exhibits better corrosion resistance properties and can be executed in industrial applications such as machine tools, bolts, and nuts in the automobile for corrosion protection, etc. © 2022, ASM International.Item Effect of Magnetic Field on Corrosion Performance of Ni–Co Alloy Coatings(Springer Science and Business Media Deutschland GmbH, 2023) Shetty, A.R.; Hegde, A.C.The corrosion protection efficacy of Ni–Co alloy coatings was tried to improve by magnetoelectrodeposition (MED) approach. The magnetic field of varying strength (B) was applied in perpendicular and parallel to the direction of diffusion of metal ions, simultaneously to the process of deposition. The corrosion behaviour of the deposited coatings was studied through electrochemical DC method and results revealed that Magneto-electrodeposited (MED) Ni–Co alloys coatings were found to be more corrosion resistant than their conventionally electrodeposited (ED) counterparts. Moreover, the effect of magnetic field is more pronounced in perpendicular field direction and was explained by Lorentz force. Under optimal condition, MED Ni–Co alloy coating obtained at a magnetic field intensity of B = 0.3 T (Perpendicular) was found to be less prone to corrosion than its ED alloy (B = 0 T) counterpart. The increased limiting current density (iL) of Co2+ ions in turn increases the corrosion resistant properties of MED Ni–Co alloy coatings. The effect of magnetic field on improved corrosion resistance of the deposited coatings have been investigated in terms of their changed surface morphology, composition, phase structure and surface roughness using Scanning electron microscopy (SEM), Energy dispersion spectroscopy (EDS), X-Ray diffraction (XRD) technique and Atomic Force Microscopy (AFM) respectively. © 2022, The Author(s).