Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Effect of morphology and oxidation state of nickel on diesel soot oxidation activity(Elsevier Ltd, 2022) Vijay, M.P.A.; Patil, S.S.; Madhura, D.R.; Anjana, A.P.; Gouramma, P.; Prasad Dasari, H.P.; Arya, S.B.; Harshini, H.NiO sample is synthesized using the EDTA citrate complex method and calcined at 600 °C/5 h. Ni sample was acquired by reducing NiO to Ni at 600 °C in 4% H2/N2 atmosphere. Its physicochemical properties were obtained by XRD and Raman spectroscopy analysis, where it confirmed the complete reduction of NiO to Ni. SEM and TEM micrographs revealed a drastic particle growth for the Ni, indicating NiO sintering during the reduction process and a considerable surface morphology change. Ozawa and KAS methods were used to calculate the mean activation energy (Ea) value. NiO displayed lower Ea than Ni. Hence, NiO showed better catalytic activity than Ni. © 2022Item A Negative Effect of Niobium-Doped Ceria on Soot Oxidation Activity‡(John Wiley and Sons Inc, 2022) Patil, S.S.; Naik, S.; Ramesh, M.D.; Harshini, H.; Prasad Dasari, H.P.Niobium-doped ceria catalysts were synthesized to study soot oxidation activity. X-Ray diffraction (XRD) and Raman analysis of the samples revealed the presence of a fluorite structure of CeO2 for all the doped samples. The T50 temperature of the pure CeO2 sample was more significant than that of bare soot. The high catalytic activity of the CeO2 catalyst can be attributed to the low crystallite size, high facet ratio, and the large Brunauer-Emmett-Teller (BET) surface area as compared to Nb-doped samples. The activation energy calculated by both Ozawa and KAS methods were found to be low for CeO2 when compared to Nb-doped samples. CeO2 resulted in better soot oxidation activity with low activation energy. © 2022 Wiley-VCH GmbHItem Soot Oxidation Kinetics on Nickel Oxide: Effects of Various Synthesis Techniques(Pleiades Publishing, 2024) Patil, S.S.; Prasad Dasari, H.P.; Gouramma, P.; Harshini, H.Abstract: Nickel oxide (NiO) nanoparticles were synthesized using four different methods: microwave co-precipitation (MCP), solution combustion synthesis (SCS), direct nitrate calcination (DNC), and the sol-gel process (SGP), incorporating organic additives such as glucose and fructose. X-ray diffraction and Raman spectroscopy analyses revealed that the NiO nanoparticles formed a face-centered cubic phase characterized by Ni–O bond stretching. The SCS method produced NiO nanoparticles with higher lattice strain, smaller crystallite size, and an increased facet ratio ({110}) compared to the other methods. Transmission electron microscopy indicated that the order of nano-agglomeration size for the NiO nanoparticles was DNC > MCP > SGP > SCS. The NiO nanoparticles synthesized via SCS, SGP and MCP exhibited irregular hexagonal shapes. Among the synthesized nanoparticles, those produced by the SCS method demonstrated the highest catalytic activity (T50 = 478°C), followed by DNC (T50 = 492°C), MCP (T50 = 495°C), and SGP (T50 = 538°C). A kinetic study was conducted to evaluate key parameters, including activation energy, preexponential factor, and reaction model. The experimental curves of soot conversion were compared with theoretical curves derived from the evaluated kinetic parameters. The NiO nanoparticles synthesized via SCS exhibited the highest kinetic activity with the enhanced reaction rate at lower temperatures. © Pleiades Publishing, Ltd. 2024.Item Diesel soot oxidation over Mn–Pr–Ce oxide catalysts: structural changes and the impact of Mn doping(Royal Society of Chemistry, 2025) Patil, S.S.; Prasad Dasari, H.P.; Shirasangi, R.; Harshini, H.The soot oxidation activity of manganese-doped ceria-praseodymium catalysts, synthesized via solution combustion synthesis, was evaluated. The analyses performed with XRD and Raman spectroscopy indicated that the Mn-doped CP catalysts displayed the typical fluorite structure of CeO2. The addition of Mn to CP led to a reduction in crystallite size from 14 nm to below 10 nm. The F2g Raman active mode of fluorite-structured Ce and the oxygen vacancies resulting from the addition of Mn and Pr (bands B 560 cm–1 to 580 cm–1) were consistently observed across all Mn-doped CP catalysts. 15 and 20 Mn-CP exhibited an additional secondary phase identified as Mn2O3. The analysis of BET surface area and BJH pore size revealed that the Mn-doped CP catalysts exhibited both micro and mesoporous characteristics. The H2-TPR and O2-TPD profiles indicated enhanced reducibility resulting from the incorporation of Mn and Pr into CeO2-doped catalysts. The improved T50 (365 ± 1 1C) for the 5 Mn-CP catalytic system is primarily due to its increased specific surface area of 45 m2 g–1 and the presence of active surface adsorbed oxygen species identified in the XPS and O2-TPD studies. 5 Mn-CP exhibited the lowest activation energy value compared to all other Mn-doped catalysts. © 2025 The Author(s)