Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Optimisation of monotube magnetorheological damper under shear mode(Springer Verlag service@springer.de, 2017) Gurubasavaraju, T.M.; Kumar, H.; Mahalingam, M.Magnetorheological dampers (MR) are one of the semi active devices, which has the capability of providing variable damping force for the variable input current. Induced force is directly dependent on the amount of magnetic flux density developed in effective fluid flow gap of the MR damper. In the present work, influence of material properties on the magnetic flux is investigated by considering magnetic and nonmagnetic material for the outer cylinder of shear mode type MR damper. Magnetostatic analysis is carried out to obtain magnetic flux density for the initial configuration of the MR damper. From the analysis, it is found that usage of magnetic material cylinder which is insulated with nonmagnetic material provided higher value of magnetic flux and damping force. The geometric optimisation of MR damper is carried out to obtain the maximum flux density in the fluid flow gap. The objective function of the optimisation includes the maximum magnetic flux density and minimising fluid flow gap. Design variables considered are fluid flow gap, number of turns in the electromagnetic coil, length of the flange and DC current input. The optimisation is performed through response surface method using finite element analysis software (ANSYS). The best optimal design parameters are obtained by choosing the appropriate value of objective function. The best configuration of the design parameters, which induce the maximum magnetic flux density, is identified. The force induced in the MR damper is estimated analytically and a comparative study of the optimised and non-optimised results was carried out. © 2017, The Brazilian Society of Mechanical Sciences and Engineering.Item An approach for characterizing twin-tube shear-mode magnetorheological damper through coupled FE and CFD analysis(Springer Verlag service@springer.de, 2018) Gurubasavaraju, T.M.; Kumar, H.; Mahalingam, A.The most promising technology in the field of semi-active suspension systems is the use of magnetorheological property of MR fluid, whose material behavior can be controlled through external magnetic field. Devices developed based on this principle are adaptive and controllable as desired for a specific application. It is important to understand the damping characteristics of these devices before employing them, using experimental or computational approaches. In the present work, both experimental and computational methods have been adopted for characterizing a twin-tube MR damper with an intention to develop a computational approach as an alternative to experimental test in the preliminary design stage. Initially, experimental characterization of MR damper was carried out at 1.5 and 2 Hz frequencies for damper stroke length of ± 5 mm under different DC currents ranging from 0.1 to 0.4 A. Later, coupled finite-element and computational fluid dynamic analysis has been carried out to estimate the damping force under same conditions as used in the experiment. The results of computation are in good agreement with experimental ones. Furthermore, using this computational approach, the damping force at different frequencies of 1.5, 2, 3, and 4 Hz has been estimated and its time histories are also plotted. The influence of fluid flow gap on the damping force has been determined and results revealed that damping force behaves inversely with fluid flow gap. © 2018, The Brazilian Society of Mechanical Sciences and Engineering.