Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Filters

2017 - 20183

Settings

Author: search.filters.author.Gupta, D.Subject: search.filters.subject.Combustion

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Development of low temperature stoichiometric solution combustion derived transparent conductive ternary zinc tin co-doped indium oxide electrodes
    (Royal Society of Chemistry, 2017) Pujar, P.; Gandla, S.; Singh, M.; Gupta, B.; Tarafder, K.; Gupta, D.; Noh, Y.-Y.; Mandal, S.
    Here, the development of transparent conductive zinc tin co-doped indium oxide (IZTO: In1.4Sn0.3Zn0.3O3) ternary electrodes is addressed through low temperature solution combustion processing. Optimization of fuel to oxidizer ratio offers low temperature (?130 °C) of combustion with balanced redox reaction. The thin films of IZTO annealed at different temperatures showed a decreasing trend in the resistivity with a fixed order of 10-2 ? cm and the film with a highest Hall mobility of 5.92 cm2 V-1 s-1 resulted at 400 °C. All the films with different temperatures of annealing were smooth (rms ? 2.42 nm) in nature and the IZTO film annealed at 200 °C is 83% transparent in the visible spectra. The effective band gap of 0.9 eV determined from first-principles density functional theory gives clear evidence for the conducting nature of IZTO. The thin film transistor fabricated with IZTO as a gate electrode with poly(methyl methacrylate) and pentacene as the dielectric and channel material, respectively, exhibited a saturation mobility of 0.44 cm2 V-1 s-1 and Ion/Ioff ratio of 103. Further, the printability of the IZTO combustible precursor is established which resulted in anti-edge deposition of the printed feature. © 2017 The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Retention of high dielectric constant sodium beta alumina via solution combustion: Role of aluminum ions complexation with fuel
    (Elsevier Ltd, 2018) Gupta, B.; Pujar, P.; Mal, S.S.; Gupta, D.; Mandal, S.
    In the present study, solution combustion technique has been explored to synthesize Sodium ?-alumina (SBA; NaAl11O17) powder and thin films. Three fuels namely urea, glycine and citric acid have been used to seek the feasibility of synthesizing crystalline SBA powder at low temperature. Also, the effect of nature of fuels used as well as calcination treatment on phase evolution and morphology of the as-combusted powder was investigated. Thermal analysis and X-ray diffraction studies suggest the formation of crystalline SBA powder at temperature as low as 259 °C, using urea in the combustion reaction whereas other fuels resulted in amorphous SBA phase and this variation in phase was found due to difference in exothermicity of the fuel used. Thermodynamic and spectroscopic analyses showed that the exothermicity of fuel depends on various factors like (i) standard heat of formation of fuel and (ii) the complexation offered by fuel to metal cations. Furthermore, sodium ?-alumina thin film capacitor (metal-insulator-metal) was also fabricated using urea via spray combustion synthesis. The sodium ?-alumina thin film showed a high dielectric value (?r) of ~21. © 2017 Elsevier Ltd and Techna Group S.r.l.
  • No Thumbnail Available
    Item
    A balancing between super transparency and conductivity of solution combustion derived titanium doped indium oxide: Effect of charge carrier density and mobility
    (Elsevier B.V., 2018) Pujar, P.; Vardhan, R.V.; Gupta, D.; Mandal, S.
    In this contribution, super transparent (~100%) and conducting In14Ti1O23 (Titanium doped Indium oxide; InTiO) films were reported via solution combustion processing with acetylacetone as fuel. Both bulk-powder and thin film systems were studied and revealed the efficacy of low temperature combustion synthesis which yielded crystalline InTiO powder at 150 °C and its film counterpart had shown pronounced crystalinity with temperature. Also, all films with varying annealing temperature were smooth with rms value ranging from 0.29 nm to 1.9 nm. In addition, the charge carrier density in all films found to be of the order 1019 cm?3, possessing highest transparency nearly equals to uncoated glass at an annealing temperature of 350 °C having maximum of ~67% metal-oxygen-metal framework (or lattice oxygen) confirmed via X-ray photoelectron spectroscopy. Also, the highest conductivity of 20 S/cm at an annealing temperature of 450 °C clearly conveyed the potential of solution combustion processing in the fabrication of ultra-transparent InTiO films with no sophistication in the film fabrication. © 2018