Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Vibro-acoustics response of an isotropic plate under non-uniform edge loading: An analytical investigation(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2020) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.M.Analytical studies carried out on the vibro-acoustic response behavior of an isotropic plate under non-uniform edge loads subjected to steady-state mechanical excitation is presented. An analytical method based on the energy approach is used to calculate the buckling load (Pcr). Free and forced vibration responses of the plate are obtained using an analytical method based on Reddy's third-order shear deformation theorem (TSDT) while sound radiation behavior is analyzed using Rayleigh Integral. Results revealed that Pcr is significantly influenced by the nature of non-uniform edge load. Similarly, natural frequencies reduce with an increase in axial compressive load due to a reduction in structural stiffness. Vibration and acoustic resonant amplitudes are affected by the intensity of the compressive load. Sound transmission loss reduces with an increase in compressive load magnitude and the effect is significant in the stiffness dominant region. © 2020 Elsevier Masson SASItem Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping(World Scientific, 2022) Gunasekaran, V.; Gulhane, S.; Gupta, S.; Jeyaraj, J.; Vasudevan, V.; Manickam, G.Sound radiation and transmission loss characteristics of variable stiffness composite plate reinforced with the curvilinear fibers are investigated numerically. The formulation is developed using higher-order shear flexible finite element model combined with Helmholtz wave equation. The governing equations obtained using Hamilton's approach are further solved through the modal super position method to analyze the vibration response under steady state excitation. The inherent material damping of the laminate is accounted through the modal damping calculated using the modal strain energy approach. The acoustic pressure of the variable stiffness laminates is estimated using the Raleigh integral. Subsequently, acoustic response characteristics such as acoustic power level, radiation efficiency, directivity pattern, and transmission loss from the laminates are predicted using the estimated sound pressure for various forcing frequencies. A parametric study covering a wide range of design variables including center and edge fiber angles, lamination scheme, thickness ratio, and boundary conditions on the acoustic sound behavior arising from the vibration of curvilinear fiber composite plate is detailed. This study reveals that the acoustic response of the curvilinear fiber composite plate is significantly influenced by the curvilinear fiber angles at the center/edge fiber angle of the layers. It is hoped that the results obtained here will be useful for designers in developing structures with desired acoustic response characteristics. © 2022 World Scientific Publishing Company.Item Nonlinear flutter of 2D variable stiffness curvilinear fibers composite laminates by a higher-order shear flexible beam theory with Poisson's effect(Elsevier Ltd, 2022) Manickam, G.; Vasudevan, V.; Gunasekaran, V.; Jeyaraj, J.; Mohamed, H.In this work, the nonlinear supersonic panel flutter characteristics of two-dimensional variable stiffness curvilinear fibres based laminated composite panels are studied using a higher-order shear flexible theory represented by sine function coupled with first-order approximation leading to quasi-aerodynamic theory. The structural formation takes care of geometric nonlinearity with von Karman's assumptions. The beam constitutive equation is modified for the laminated beam with general lay-up by accounting for Poisson's effect. The nonlinear dynamic equilibrium equations developed by Lagrangian equations of motion are solved using finite element approach in conjunction with the direct iterative solution procedure. For limit cycle oscillation, critical dynamic pressure is predicted iteratively through eigenvalue analysis, thereby identifying the first coalescence of vibrational modes. Also, the flutter behavior of two-dimensional panel under static differential pressure is investigated considering nonlinear static equilibrium position of panel obtained by Newton-Raphson's iterative approach and then followed by modes coalescence approach. These solution procedures are tested against the results in literature. A thorough numerical investigation is done to show the effect of the curvilinear fiber path orientation, limited cycle amplitude, static differential pressure, panel thickness, panel end condition flexibilities and thermal environment on the nonlinear supersonic panel flutter of two-dimensional variable stiffness laminated panels. © 2022Item A comprehensive damping study of variable stiffness composite rectangular/skew laminates reinforcement with curvilinear fibers by higher-order shear flexible model(Taylor and Francis Ltd., 2023) Mohamed, H.; Gunasekaran, V.; Jeyaraj, J.; Vasudevan, V.; Kotriwar, G.; Manickam, G.In this work, a comprehensive investigation of curvilinear fiber reinforcement on damping of rectangular and skew composite plates is computationally estimated using higher-order shear flexible model. A set of governing equilibrium equations developed here in form of eigenvalue analysis is solved by adopting the Q-R algorithm. The damping factors associated with different vibrational modes are evaluated from the complex eigenvalues. The proposed model is validated against the available analytical and experimental results. The damping capability of laminated rectangular/skew composite plates is thoroughly analyzed by varying the curvilinear fiber path angles in the layers, lay-up orientations, structural boundary conditions, skew angle of the laminate, and nature of the material. Results reveal that the damping pretending to the curvilinear fibers plate is better than the conventional composite laminate; it varies significantly according to the variation in center and edge of the curvilinear fiber angles. It is also noted that the damping increases with the skew angle of the plate. The study conducted here shows the suitability of such variable stiffness composite structure for safe design under dynamic/impact loading situation. © 2022 Taylor & Francis Group, LLC.Item Nonlinear thermo-elastic stability of variable stiffness curvilinear fibres based layered composite beams by shear deformable trigonometric beam model coupled with modified constitutive equations(Elsevier Ltd, 2023) Manickam, G.; Haboussi, M.; D'Ottavio, M.; Kulkarni, V.; Chettiar, A.; Gunasekaran, V.Nonlinear thermo-elastic buckling characteristics of composite variable stiffness beam with layers making use of curvilinear fibres under thermal environment is attempted here. The model is based on a shear deformable theory introducing trigonometric function, and considering von Kármán's assumptions based geometrical nonlinear effect. The beam constitutive equation is modified according to the stress-free situation in the width direction of beam-Poisson's effect in the formulation for predicting the behaviour of general lay-up composite beams. By the principle of minimum total potential energy, the governing equations in terms of incremental stiffness matrices are formed introducing general beam finite element. The global equilibrium equations formulated are solved for envisaging the post-buckling path through eigenvalue analysis iteratively, thus establishing the relationship of thermal temperature against moderate amplitude level of beam deflection. A systematic parametric analysis considering different lamina properties such as curvilinear fibre path angles and including lay-up sequences, thermal expansion coefficient, mixed laminate combining straight and curvilinear fibres-based layers is carried out on thermo-structural stability of curvilinear fibre-based beams. Also, the influence of geometric factors, flexible beam end support, and variation in thermal profile, etc. over the stability behaviour of beam is examined. © 2022Item Post-buckling of variable stiffness curvilinear fibre-reinforced general lay-up composite beams by sinusoidal shear flexible theory(SAGE Publications Ltd, 2024) Manickam, G.; Polit, O.; Haboussi, M.; Chettiar, A.; Kulkarni, V.; Gunasekaran, V.The mechanical post-buckling behaviour of variable stiffness layered composite beams reinforced by curvilinear fibres subjected to compressive loads is investigated here using a sine function-based shear flexible beam model. The neutral axis stretching force stemming from the axial movement restraints is accounted for through von Karman’s assumption based geometrical nonlinearity. Furthermore, the modified beam constitutive equation arising from the consideration of the Poisson’s effect is introduced in the formulation for the laminated beam analysis with general lay-up or ply sequences. The governing equations incorporating the incremental stiffness matrices are formed through the minimization of total potential energy principle and are solved by numerical method. The solutions for the developed governing equations are evaluated iteratively based on eigenvalue analysis and the characteristics of post-buckling of laminated beams can be inferred through the relationship between the beam deflection level and post-buckling axial load. An in-depth analysis selecting many design parameters for instance lamina’s curvilinear fibre angles, beam slenderness ratio, lay-up and edge conditions, load type and so on is dealt with in bringing out the behaviour of variable stiffness laminated beam in linear and post-buckling regions. Also, the influence of flexible end supports by restraining elastically against ends rotation is studied on the beam elastic stability behaviour. © The Author(s) 2023.