Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Laboratory performance of stone matrix asphalt mixtures with two aggregate gradations(Springer Science and Business Media Deutschland GmbH, 2015) Goutham, G.; Lekha, B.M.; Geethu, J.S.; Ravi Shankar, A.U.Stone matrix asphalt (SMA) is a gap-graded bituminous mixture which can be used in surface layer of high volume pavements. The mixture has higher concentrations of coarse aggregates, providing strength and rut resistance to the mixture, and higher asphalt content giving durability. There must be a proper stone-to-stone contact between the coarse aggregates of SMA, and hence aggregate gradation is an important factor in this mixture. In the current study, two aggregate gradations, with nominal maximum aggregate sizes (NMAS) 16 and 13 mm were adopted to prepare SMA mixtures and their laboratory performances were compared. Polymer-modified bitumen (PMB) was used as the binder material and no stabilising additive was used, since drain down was within permissible limits for both mixtures with PMB. Conventional cylindrical specimens were prepared in superpave gyratory compactor with bitumen contents 5.0 %, 5.5 %, 6.0 %, 6.5 % and 7.0 % by weight of aggregates, and volumetric and Marshall properties were determined. Tensile strength, behaviour to repeated loading etc. were checked for cylindrical specimens prepared at optimum bitumen content, whereas specially prepared slab specimens were used to check the rutting resistance of SMA mixtures. From the laboratory study, it was observed that, out of the two SMA mixtures, the one with NMAS 16 mm performed better compared to the other. These improved properties may be attributed towards the larger coarse aggregate sizes in the mixture. © 2015, The Author(s).Item Comparison of Stone Matrix Asphalt mixtures with polymer-modified bitumen and shredded waste plastics(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2016) Goutham, G.; Lekha, B.M.; Krishna, G.; Ravi Shankar, A.U.Stone Matrix Asphalt (SMA) is a gap-graded bituminous mixture characterised with its improved rut resistance and durability. It has comparatively higher proportion of coarse aggregates and binder mastic with bituminous binder and mineral filler. Drain down of mastic content at various stages of construction is a common issue with SMA, and generally, some fibre additives are used to stabilise the mixture or a modified bitumen is used as the binder material. In this study, shredded waste plastics (SWP) are used instead of other stabilising additives, to prepare SMA mixtures with conventional viscosity graded (VG) 30 bitumen. Mixtures were prepared with four different levels of SWP content, and another mixture without any stabilisers was also prepared using polymer-modified bitumen (PMB). Specimens were prepared in superpave gyratory compactor (SGC) for all mixtures at different bitumen contents to determine volumetric and Marshall properties, and optimum bitumen content (OBC) was calculated for each mixture. Tensile strength, moisture susceptibility, rutting resistance and fatigue behaviour were also determined for all mixtures at corresponding OBC. From the available results, the optimum level of SWP in SMA mixture was determined as 8% by weight of bitumen. The study showed that even though mixture with PMB performed the best, SMA with 8% SWP provided comparable results. Based on the present investigation, waste plastic in suitable dosage can be recommended in SMA, instead of a stabilising additive. © 2015 Informa UK Limited, trading as Taylor & Francis Group.