Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Comparison of fluid flow and heat transfer through metal foams and wire mesh by using CFD(Bentham Science Publishers, 2019) Kotresha, B.; Gnanasekaran, N.Background: The unique structural characteristics of the metal foams, such as low density, large surface area, ability to increase turbulence, and increased heat transfer efficiency, are the advantages associated with thermal applications such as electronics cooling, refrigeration air conditioning, etc. The porous metal foam structures are extensively used to enhance heat transfer. Objective: This paper discusses the numerical simulations of a vertical channel filled with metal foam and wire mesh. The fluid flow and heat transfer phenomena of a wire mesh are compared with two different types of metal foams. Metal foams are made of aluminium and copper while the wire mesh is made of brass. The porosity of the metallic porous structures varies from 0.85 to 0.95. Methods: A Darcy extended Forchheirmer model is considered for solving fluid flow through the porous media while the heat transfer through the porous media is predicted using local thermal non-equilibrium model. Results: Initially, the results obtained using the proposed numerical procedures are compared with experimental results available in the literature. The numerical simulations suggest that the pressure drop increases as the velocity of the fluid increases and decreases as the porosity increases. The heat transfer coefficient and Nusselt number are determined for both the metal foams and the wire mesh. Conclusion: The Nusselt number obtained for wire mesh shows almost 90% of the copper metal foam in the same porosity range. The numerical results suggest that the brass wire mesh porous medium can also be used for enhancement of heat transfer. In this article, patents have been discussed. © 2019 Bentham Science Publishers.Item Determination of interfacial heat transfer coefficient for the flow assisted mixed convection through brass wire mesh(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2019) Kotresha, B.; Gnanasekaran, N.In this work, a numerical investigation of Darcy?Forchheimer mixed convection from a heated vertical flat plate embedded in a brass wire mesh porous medium is carried out to determine the coupled effects of flow and thermal diffusion. The numerical model consists of a two dimensional computational domain in which conjugate heat transfer analysis is performed to predict the hydrodynamic and thermal performance of the brass wire mesh in a vertical channel using Local Thermal Non-Equillibrium (LTNE) model. The novelty of the present study is to acquire the interfacial heat transfer coefficient, an as yet another challenging task, of the wire mesh porous medium so as to provide a quick and feasible solution to modeling of fluid flow and heat transfer through brass wire mesh porous media. The results of heat transfer through brass wire mesh are reported in terms of Colburn j factor, performance factor and are compared with other porous mediums available in literature. The present study not only opens up new vistas for more parametric studies but also provides practical and cost effective assessment to design new porous materials. © 2018 Elsevier Masson SASItem A Parametric Study on Mixed Convection in a Vertical Channel in the Presence of Wire Mesh(Taylor and Francis Ltd., 2021) Kotresha, B.; Gnanasekaran, N.A numerical study on mixed convection is carried out through a partially filled brass wire mesh in a vertical channel. A heater embedded with aluminum plates is placed at the center of the vertical channel. The aluminum heater assembly is wrapped with brass wire mesh to facilitate more heat transfer. The vertical channel that consists of aluminum heater assembly with the brass wire mesh is considered as the numerical model. Local thermal non-equilibrium and Darcy extended Forchheimer models are used to accomplish the numerical simulations for thermal and flow characteristics of the considered domain. The aim of the study is to find out the optimum filling of the brass wire mesh in the channel which gives a higher heat transfer rate with low pumping power of the fluid. In the present analysis, three different filling conditions of wire mesh are considered: (i) fully filled channel, (ii) 70% filled channel, and (iii) 40% filled channel. From the results, it is inferred that the vertical channel partially filled with 70% of wire mesh porous medium predicts 89% of heat transfer of the completely filled channel with 41% reduced pressure loss. As a result, the proposed parametric study is good enough to prove that the partly filled wire mesh can be used in the thermal applications where augmentation of heat transfer is required with less pressure drop. © 2020 Taylor & Francis Group, LLC.Item Correlations and Numerical Modeling of Stacked Woven Wire-Mesh Porous Media for Heat Exchange Applications(MDPI, 2022) Trilok, G.; Srinivas, K.E.S.; Harikrishnan, D.; Gnanasekaran, N.; Mobedi, M.Metal foams have gained attention due to their heat transfer augmenting capabilities. In the literature, correlations describing relations among their morphological characteristics have successfully been established and well discussed. However, collective expressions that categorize stacked wire mesh based on their morphology and thermo-hydraulic expressions required for numerical modeling are less explored in the literature. In the present study, cross relations among the morphological characteristics of stacked wire-mesh were arrived at based on mesh-size, wire diameter and stacking type, which are essential for describing the medium and determining key input parameters required for numerical modeling. Furthermore, correlation for specific surface area, a vital parameter that plays a major role in interstitial heat transfer, is provided. With the arrived correlations, properties of stacked wire-mesh samples of orderly varied mesh-size and porosity are obtained for various stacking scenarios, and corresponding thermo-hydraulic parameters appearing in the governing equations are evaluated. A vertical channel housing the categorized wire-mesh porous media is numerically modeled to analyze thermal and flow characteristics of such a medium. The proposed correlations can be used in confidence to evaluate thermo-hydraulic parameters appearing in governing equations in order to numerically model various samples of stacked wire-mesh types of porous media in a variety of heat transfer applications. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.Item Thermohydraulic Efficiency of a Solar Air Heater in the Presence of Graded Aluminium Wire Mesh—A Combined Experimental–Numerical Study(Multidisciplinary Digital Publishing Institute (MDPI), 2023) Diganjit, R.; Gnanasekaran, N.; Mobedi, M.In this work, aluminium wire mesh (WM) samples with 3, 9, and 18 pores per inch (PPI) and porosities of 0.894, 0.812, and 0.917, respectively, were combined together to form graded structures including 3-9-18, 9-18-3, and 18-3-9 PPIs. A 5 mm thickness for each WM was considered for a length of 2 m and inserted into a single-pass solar air heater (SAH) in which the height of the SAH was 120 mm. For the numerical analysis, a 3D numerical model was considered in ANSYS fluent software, and the Rosseland radiation model renormalization group (RNG) k-ε enhanced wall function was incorporated to account for solar radiation. The local thermal equilibrium (LTE) model was considered to obtain the heat-transfer characteristics of the WM. The numerical results of the thermohydraulic performance parameter (THPP) of the 9-18-3 PPI WM were 13.04% and 11.92% higher than the 3-9-18 and 18-3-9 PPI samples, respectively. Later, 25% of the 9-18-3 graded wire mesh (GWM) was considered at four different locations, i.e., 0, 0.5, 1, and 1.5 m away from the inlet, and analysed to obtain the best location for efficient heat transfer. The computational results show that 1.5 m away from the inlet is the best location among the different locations considered. The experimental results of the GWM at 1.5 m away from the inlet demonstrated a 20.91% and 23.32% increase in thermal efficiency compared to the empty channel for the 0.027 kg/s and 0.058 kg/s mass flow rates, respectively. From numerical-cum-experimental analysis, it was found that inserting 25% length of GWM of the entire length of the test section at a distance of 1.5 m from the inlet in single pass SAH improves the overall performance of the empty channel of single-pass SAH. © 2023 by the authors.Item Reconciliation of wire woven mesh porous media in controlling the desired heat transfer and pressure drop(Emerald Publishing, 2025) Trilok, T.; Gnanasekaran, N.; Mobedi, M.Purpose: Despite the reputation of the metal-based porous media for their ability to augment heat transfer as widely witnessed in the literature and practically operating heat exchanging applications, the coexisting penalty of the increased pressure drop demanding increased pumping power poses a major concern that invites the need for an alternate solution to handle this unsought outcome. Therefore, this study aims at providing a better solution to the existing cost and benefit scenarios to benefit a plethora of engineering applications including energy transfer, energy storage and energy conversion. Design/methodology/approach: This work highlights on the property of stacked woven wire mesh porous media such as their stacking types, porous conditions and thickness scenarios that can potentially result in distinct trade-off scenarios. A vertical channel is numerical modelled by using REV scaled modelling technique using Darcy-Forchheimer and local thermal non-equilibrium models to illustrate the possibilities of this variety of trade off scenarios between the desirable heat transfer and the unsought flow resistance. Findings: This work illustrates the advantages of wire mesh-based porous medium and its distinct potential in controlling the existing trade-offs between the cost and benefit aspects. It is found that by varying the features of wire mesh porous media, the interplay between the conflictingly existing characteristics can be much easily handled specific to distinct requirements associated with variety of engineering applications. Originality/value: The study emphasizes on a new solution or methodology to handle the penalty of pressure drop associated with metal-based porous media. Through this study, a novel approach to control the ultimately costing pumping power at the benefit of increased heat transfer is provided considering various requirements that could be associated with any thermal management systems. Various possibilities and potentials of wire mesh porous media are illustrated highlighting on their benefit of ease with which the mentioned goals can be achieved. © 2024, Emerald Publishing Limited.