Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item A Bayesian inference approach: estimation of heat flux from fin for perturbed temperature data(Springer India, 2018) Kumar, H.; Gnanasekaran, N.This paper reports the estimation of the unknown boundary heat flux from a fin using the Bayesian inference method. The setup consists of a rectangular mild steel fin of dimensions 250×150×6 mm3 and an aluminium base plate of dimensions 250×150×8 mm3. The fin is subjected to constant heat flux at the base and the fin setup is modelled using ANSYS14.5. The problem considered is a conjugate heat transfer from the fin, and the Navier–Stokes equation is solved to obtain the flow parameters. Grid independence study is carried out to fix the number of grids for the study considered. To reduce the computational cost, computational fluid dynamics (CFD) is replaced with artificial neural network (ANN) as the forward model. The Markov Chain Monte Carlo (MCMC) powered by Metropolis–Hastings sampling algorithm along with the Bayesian framework is used to explore the estimation space. The sensitivity analysis of the estimated temperature with respect to the unknown parameter is discussed to know the dependency of the temperature with the parameter. This paper signifies the effect of a prior model on the execution of the inverse algorithm at different noise levels. The unknown heat flux is estimated for the surrogated temperature and the estimates are reported as mean, Maximum a Posteriori (MAP) and standard deviation. The effect of a-priori information on the estimated parameter is also addressed. The standard deviation in the estimation process is referred to as the uncertainty associated with the estimated parameters. © 2018, Indian Academy of Sciences.Item Simultaneous estimation of unknown parameters using a-priori knowledge for the estimation of interfacial heat transfer coefficient during solidification of Sn–5wt%Pb alloy—an ANN-driven Bayesian approach(Springer, 2019) Vishweshwara, P.S.; Gnanasekaran, N.; Arun, M.The present methodology focuses on model reduction in which the prevalent one-dimensional transient heat conduction equation for a horizontal solidification of Sn–5wt%Pb alloy is replaced with Artificial Neural Network (ANN) in order to estimate the unknown constants present in the interfacial heat transfer coefficient correlation. As a novel approach, ANN-driven forward model is synergistically combined with Bayesian framework and Genetic algorithm to simultaneously estimate the unknown parameters and modelling error. Gaussian noise is then added to the temperature distribution obtained using the forward approach to represent real-time experiments. The hallmark of the present work is to reduce the computational time of both the forward and the inverse methods and to simultaneously estimate the unknown parameters using a-priori engineering knowledge. The results of the present methodology prove that the simultaneous estimation of unknown parameters can be effectively obtained only with the use of Bayesian framework. © 2019, Indian Academy of Sciences.Item 3D coupled conduction-convection problem using in-house heat transfer experiments in conjunction with hybrid inverse approach(Emerald Group Holdings Ltd., 2019) Vishweshwara, P.S.; Kumar, M.K.; Gnanasekaran, N.; Mahalingam, A.Purpose: Many a times, the information about the boundary heat flux is obtained only through inverse approach by locating the thermocouple or temperature sensor in accessible boundary. Most of the work reported in literature for the estimation of unknown parameters is based on heat conduction model. Inverse approach using conjugate heat transfer is found inadequate in literature. Therefore, the purpose of the paper is to develop a 3D conjugate heat transfer model without model reduction for the estimation of heat flux and heat transfer coefficient from the measured temperatures. Design/methodology/approach: A 3 D conjugate fin heat transfer model is solved using commercial software for the known boundary conditions. Navier–Stokes equation is solved to obtain the necessary temperature distribution of the fin. Later, the complete model is replaced with neural network to expedite the computations of the forward problem. For the inverse approach, genetic algorithm (GA) and particle swarm optimization (PSO) are applied to estimate the unknown parameters. Eventually, a hybrid algorithm is proposed by combining PSO with Broyden–Fletcher–Goldfarb–Shanno (BFGS) method that outperforms GA and PSO. Findings: The authors demonstrate that the evolutionary algorithms can be used to obtain accurate results from simulated measurements. Efficacy of the hybrid algorithm is established using real time measurements. The hybrid algorithm (PSO-BFGS) is more efficient in the estimation of unknown parameters for experimentally measured temperature data compared to GA and PSO algorithms. Originality/value: Surrogate model using ANN based on computational fluid dynamics simulations and in-house steady state fin experiments to estimate the heat flux and heat transfer coefficient separately using GA, PSO and PSO-BFGS. © 2019, Emerald Publishing Limited.Item Inverse approach using bio-inspired algorithm within Bayesian framework for the estimation of heat transfer coefficients during solidification of casting(American Society of Mechanical Engineers (ASME), 2020) Vishweshwara, P.S.; Gnanasekaran, N.; Arun, M.In any parameter estimation problem, it is desirable to obtain more information in one single experiment. However, it is difficult to achieve multiple objectives in one single experiment. The work presented in this paper is the simultaneous estimation of heat transfer coefficient parameters, latent heat, and modeling error during the solidification of Al-4.5 wt %Cu alloy with the aid of Bayesian framework as an objective function that harmoniously matches the mathematical model and measurements. A 1D transient solidification problem is considered to be the mathematical model/forward model and numerically solved to obtain temperature distribution for the known boundary and initial conditions. Genetic algorithm (GA) and particle swarm optimization (PSO) are used as an inverse approach and the estimation of unknown parameters is accomplished for both pure and noisy temperature data. The use of Bayesian framework for the estimation of unknown parameters not only provides the information about the uncertainties associated with the estimates but also there is an inherent regularization term in which the inverse problem boils down to well-posed problem thereby plethora of information is extracted with less number of measurements. Finally, the results of this work open up new prospects for the solidification problem so as to obtain a feasible solution with the present approach. © © 2020 by ASME