Faculty Publications

Now showing 1 - 3 of 3

Numerical study on maximizing heat transfer and minimizing flow resistance behavior of metal foams owing to their structural properties
(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2021) Trilok, T.; Gnanasekaran, N.
Despite many research works considering metal foams largely involving heat exchange applications, an overall comprehensive view on the performance of metal foams based on their structural properties is hitherto unaddressed in the literature. In the present work, an air forced convection-laminar flow in a vertical channel is considered in which a heated plate along with metal foam is placed at the center. The plate is subject to constant heat flux condition to assess the performance of aluminum metal foam based on their degree of inclination towards maximizing heat transfer and minimizing flow resistance behavior in a vertical channel corresponding to the combination of structural properties they possess. Heat transfer and flow phenomena pertaining to the metal foam are numerically modeled using Local Thermal Non-Equilibrium (LTNE) and Darcy–Forchheimer flow models, respectively to obtain key thermo-hydrodynamic parameters. Both the independent and the combined effects of foam structural parameters viz., porosity and pore density on Nusselt number and friction factor are discussed justifying the effects of interfacial specific surface area and interfacial heat transfer coefficient of fluid saturated foam samples. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) a multi attribute decision-making technique is applied to solve the multi objective function to determine the performance of metal foams measured on a scale of 0 to 1. Five distinct criteria are studied involving distributed weights of 0:1, 0.25:0.75, 0.5:0.5, 0.75:0.25 and 1:0 each representing amplitudes of varying importance given to maximizing heat transfer and minimizing flow resistance characteristics of metal foams. Global performance charts are obtained, featuring performance abilities of metal foam samples covering wide ranges of porosity ranging from 0.8 to 0.97 and pore densities ranging from 5PPI to 45PPI corresponding to a given criteria involving a specific weight distribution scenario. The present work provides performance characteristics of available as well as possible foam samples with an overview idea on the range of structural aspects of foam samples, where the enhanced ability of the foam to perform best in meeting the given criteria is witnessed. © 2020 Elsevier Masson SAS
Various trade-off scenarios in thermo-hydrodynamic performance of metal foams due to variations in their thickness and structural conditions
(MDPI, 2021) Trilok, G.; Gnanasekaran, N.; Mobedi, M.
The long standing issue of increased heat transfer, always accompanied by increased pressure drop using metal foams, is addressed in the present work. Heat transfer and pressure drop, both of various magnitudes, can be observed in respect to various flow and heat transfer influencing aspects of considered metal foams. In this regard, for the first time, orderly varying pore density (characterized by visible pores per inch, i.e., PPI) and porosity (characterized by ratio of void volume to total volume) along with varied thickness are considered to comprehensively analyze variation in the trade-off scenario between flow resistance minimization and heat transfer augmentation behavior of metal foams with the help of numerical simulations and TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) which is a multi-criteria decision-making tool to address the considered multi-objective problem. A numerical domain of vertical channel is modelled with zone of metal foam porous media at the channel center by invoking LTNE and Darcy–Forchheimer models. Metal foams of four thickness ratios are considered (1, 0.75, 0.5 and 0.25), along with varied pore density (5, 10, 15, 20 and 25 PPI), each at various porosity conditions of 0.8, 0.85, 0.9 and 0.95 porosity. Numerically obtained pressure and temperature field data are critically analyzed for various trade-off scenarios exhibited under the abovementioned variable conditions. A type of metal foam based on its morphological (pore density and porosity) and configurational (thickness) aspects, which can participate in a desired trade-off scenario between flow resistance and heat transfer, is illustrated. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Multi-Objective Optimization of Hybrid Heat Sinks with Phase Change Materials
(Taylor and Francis Ltd., 2024) Nedumaran, M.S.; Trilok, G.; Gnanasekaran, N.; Hooman, K.
A passive method with phase change material (PCM) is an appropriate technique in electronic cooling. But, due to its poor thermal conductivity, many enhancers are employed to reduce the thermal resistance offered by the PCM. A partial filling strategy to reduce the cost and weight of foams with fins is used in this study. A hybrid heat sink with a combination of fins placed at the sidewalls of the enclosure and foams filled at certain heights such as 10, 20, and 30 mm is considered in this present work. A two-dimensional numerical model with n-eicosane as PCM is developed in ANSYS Fluent 19. A multi-objective optimization is carried out using a reliable multi criteria decision making approach. Different weightage is distributed to the objective functions in this method depending on the choice of the user. The pore size and density vary for various filling heights, and 60 cases are investigated for both charging and discharging cycles. The pore size of 0.8-0.95 and pore density of 5-25 pores per inch with a broad range is considered. From the discussions, guidelines for selecting a preferable pore size and pore density can be determined based on the filling height and applied weightage. © 2023 Taylor & Francis Group, LLC.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results