Faculty Publications

Now showing 1 - 2 of 2

Room-temperature ultraviolet-ozone annealing of ZnO and ZnMgO nanorods to attain enhanced optical properties
(Springer, 2020) Alam, M.J.; Murkute, P.; Sushama, S.; Ghadi, H.; Mondal, S.; Paul, S.; Das, D.; Pandey, S.K.; Chakrabarti, S.
ZnO and ZnMgO nanorods have proven to be promising materials for sensing, UV and deep UV based optoelectronic applications. A major drawback of ZnO and ZnMgO based thin films and nanorods is the presence of native point defects which deteriorates their optical efficiency and becomes an impediment to their efficient device applications. The furnace and rapid thermal annealing processes have overcome this up to a great extent but being high temperature processes, they put many fabrication and technological limits in device fabrication. Especially keeping an eye on the future flexible devices, herein we report ultraviolet-ozone (UVO) annealing as a room-temperature, simple and cost-effective annealing method to improve the optical efficiency of ZnO and ZnMgO nanorods along with control of defect states. The ZnO and ZnMgO nanorods were grown by hydrothermal method and annealed in UVO irradiation. UVO annealing substantially improved near band emission and suppressed defect band emissions. It is found that zinc interstitial atoms migrate from the top portion of ZnO nanorods towards the bottom of nanorods after UVO annealing, resulting in reduced zinc interstitial defects in the top portion of nanorods. X-ray diffraction results showed improvement in structural properties. XPS results confirmed suppression of oxygen vacancies and zinc interstitials and improvement in lattice oxygen in the ZnO nanorods after UVO annealing. Optimum times of UVO annealing for ZnO and ZnMgO nanorods were 30 and 50 min respectively. These findings will be helpful for the further development of ZnO and ZnMgO nanorods based high performance optoelectronic devices and sensors. © 2020, Springer Science+Business Media, LLC, part of Springer Nature.
Detection of acceptor-bound exciton peak at 300 K in boron–phosphorus co-doped ZnMgO thin films for room-temperature optoelectronics applications
(Elsevier B.V., 2021) Sushama, S.; Murkute, P.; Ghadi, H.; Pandey, S.K.; Chakrabarti, S.
It is well-known that the ZnMgO thin-film faces a roadblock in its potential applications for various optoelectronic devices due to the limitation imposed on achieving p-type conduction. The mono-acceptor doping of ZnMgO endures from the stern self-compensation by native donor defects and deep acceptor level formation advocating the need for alternate doping techniques like co-doping. In this paper, we report a detailed study on the improvement in structural, elemental, and optical properties of phosphorus-doped Zn0.85Mg0.15O thin films, with an aim to obtain enhancement in the signatures of acceptor-doped behavior, under the influence of boron implantation time. In addition, the paper also captures the behavior exhibited by the co-doped samples as a result of the variation in the annealing temperature. The solubility of the phosphorus atom (acceptor dopant) was observed to improve with boron (donor co-dopant) implantation as confirmed by the structural, elemental, and optical properties of co-doped ZnMgO thin films. It was also found that the acceptor level emissions got improved after boron implantation in phosphorus-doped ZnMgO thin films. Additionally, with co-doping, the sample showed the signature of acceptor-bound exciton peak till 300 K, evidencing the room-temperature operability of the films. Moreover, the fabricated film had a shallow acceptor energy level located at around 74 ± 0.45 meV above the valence band. Co-doped samples also showed stable acceptor based optical emission for more than a year. © 2020 Elsevier B.V.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results