Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Effect of Temperature on Solid-State Reaction of Prawn Shell-Derived Phase-Pure β-Tricalcium Phosphate(Springer, 2024) Satish, P.; Praveen, L.L.; Gautam, V.; Hadagalli, K.; Mandal, S.Over the past three decades, bioresorbable ceramics such as beta-tricalcium phosphate (β-TCP)-based porous scaffolds have been extensively studied. β-TCP-based scaffolds or cements for bone tissue applications have proved to be an outstanding alternative to repair and regenerate bone tissue defects caused by trauma or injury. In this study, an investigation on submicron β-TCP powders derived from prawn shell (Fenneropenaeus indicus, a source of marine biowaste) via solid-state reaction approach was carried out, which has calcite (CaCO3) in its exoskeleton (nonedible). The prawn shell-derived β-TCP can be prepared conventionally with dicalcium phosphate (CaHPO4) at different temperatures 900, 1000, 1100, and 1200 °C. The EDX spectra detect the Ca:P ratio of 1.5 confirming the formation of pure β-TCP at 1100 °C, which is in complete agreement with theoretical ratio. X-ray diffraction pattern revealed the phase-pure crystalline rhombohedral crystal structure of β-TCP with an average crystallite size of ~ 25.8 nm, prepared at 1100 °C. The field emission scanning electron microscopy images showed a homogeneous distribution of β-TCP powders with an average grain size of 3.07 µm at 1100 °C. Furthermore, Raman spectroscopy and Fourier transform infrared spectroscopy confirm the characteristics peaks of β-TCP. Differential scanning calorimetry and thermogravimetric analysis are performed to study the thermal behavior of the initial precursors mixture to synthesize β-TCP. β-TCP scaffolds sintered at 1100 °C exhibited compressive strength of ~ 6.2 MPa, for which Ca/P ratio is 1.51. Biodegradation study conducted on β-TCP scaffolds sintered at 1100 °C has shown slow degradation rate up to 5 days. Therefore, the prawn shell-derived β-TCP has physical and morphological properties which projects it as a promising implantable biomaterial for synthetic bone graft substitutes. © ASM International 2024.Item Exploring the protection of spray-pyrolysed tungsten oxide hydrophobic coating on stainless steel in a marine environment(Springer, 2024) Gautam, V.; Praveen, L.L.; Vardhan, R.V.; Mandal, S.Tremendous potential in the field of anti-biofouling coatings to prevent stainless steel (SS)-based underwater pipelines, sea vessels and other marine structures have been recognized to protect from biofouling, which is often initiated by algae attachment over the surface. In this work, hydrophobicity in spray-pyrolysed tungsten oxide (TO) coating on SS-316 substrate has been reported for the first time, via post-processing treatment using octadecyltrimethoxysilane (ODTMS) to induce self-assembled monolayer (SAM). Initially, structural and vibrational characteristics of ODTMS and ODTMS-treated TO (OTO) coating on SS were analysed using X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopies. OTO-coating depicted a water contact angle (WCA) of 121°, revealing its hydrophobic nature, with further affirmation from X-ray photoelectron spectroscopy (XPS). Durability of the TO-coating was explored using the scratch hardness (Hs) test at different loading conditions (5, 10 and 15 N). Biofouling study was conducted by culturing blue-green algae (BGA, Phormidium sp.) in an in-house laboratory setup for 40 days, using seawater (collected from the Arabian Sea, Karnataka). The SS, TO- and OTO-coatings were immersed for 14 days in a controlled sea-water environment in the laboratory with the presence of BGA. A comparative study on the areal-algae attachment was keenly analysed over SS-, TO- and OTO-coatings. This work can be projected as a promising application providing multi-dimensional solutions in creating scratch-resistant and anti-biofouling coatings on SS in the shipbuilding industry. © Indian Academy of Sciences 2024.Item Soy protein isolate films: a biodegradable solution for UV protection alternatives(Springer, 2025) Nowl, M.S.; Ambili, V.; Gautam, V.; Dutta, S.; Mandal, S.The uncompromising need to protect against harmful UVA and UVB radiation and to alleviate plastic pollution has catalyzed the development of innovative, eco-friendly materials. This study presents a solution by developing a transparent coating derived from Soy Protein Isolate (SPI), offering UV protection as well as sustainable bioplastic alternatives to synthetic polymers. The structural and chemical properties of SPI coatings, highlighting their UV protective capabilities, were analyzed using UV absorption spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Differential Scanning Calorimetry (DSC), Nuclear Magnetic Resonance (NMR), and High-Resolution Liquid Chromatography-Mass Spectrometry (HR-LCMS). X-ray photoelectron spectroscopy (XPS) analysis showed decrease in carbon composition between SPI powder and film, suggesting a different surface composition for the film from powder, whereas denaturation was further confirmed by DSC. Contact angle measurement gives insights about the surface properties of the film and HR-LCMS gives the amino acids present in SPI. The biodegradability of SPI, coupled with its durability and transparency, underscores its potential as a versatile host material for various coatings. highlighting its additional advantage. From the FE-SEM study, the coating shows uniformity, which presents an innovative approach to transparent coatings. Notably, alongside transparency, the inherent UV absorption properties of SPI remained consistent before and after denaturation, showing potential applications in UV protective biodegradable coatings for various industrial applications, promoting eco-friendly alternatives to synthetic polymers. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025.