Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Electrolytic Synthesis and Characterization of Electrocatalytic Ni-W Alloy(Springer New York LLC barbara.b.bertram@gsk.com, 2015) Elias, L.; Scott, K.; Hegde, A.Inspired by the more positive (about 0.38 V nobler) discharge potential of hydrogen on Ni-W alloy compared to that on both Ni and W, a Ni-W alloy has been developed electrolytically as an efficient electrode material for water electrolysis. The deposition conditions, for peak performance of the electrodeposits for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in 1.0 M KOH medium have been optimized. Electrocatalytic activity of the coatings, deposited at different current densities (c.d.’s) for water splitting reactions of HER and OER was tested by cyclic voltammetry and chronopotentiometry. It was found that Ni-W alloys deposited, at 4.0 A/dm2 (having about 12.49 wt.% W) and 1.0 A/dm2 (having about 0.95 wt.% W) are good electrode materials as cathode (for HER) and anode (for OER), respectively. A dependency of the electrocatalytic activity for HER and OER with relative amount of Ni and W, in the deposit was found. The variation of electrocatalytic activity with W content showed the existence of a synergism between high-catalytic property of W (due to low hydrogen overvoltage) and Ni (having increased adsorption of OH? ions), for hydrogen (as cathode) and oxygen (as anode) evolution, respectively. Electrocatalytic activities of the coatings, developed at different c.d.’s were explained in the light of their phase structure, surface morphology, and chemical composition, confirmed by XRD, FESEM, and EDX analysis. The effect of c.d. on thickness, hardness, composition, HER, and OER was analyzed, and results were discussed with possible mechanisms. © 2015, ASM International.Item Electrodeposition of laminar coatings of Ni-W alloy and their corrosion behaviour(Elsevier, 2015) Elias, L.; Hegde, A.The attractiveness of electroplating for the synthesis of advanced materials is linked to large selection of plating conditions coupled with different mass transfer processes towards the cathode, and this allows the tailoring of different properties of many electrodeposited coatings. This theme has been exploited effectively in the development of a new class of coatings; called composition modulated multilayered (CMM), or in short laminar coatings. The work embodied in this paper is to demonstrate how the corrosion resistance of monolayer Ni-W alloys can be increased to many fold of its magnitude by multilayer deposition. Ni-W coatings have been deposited on mild steel (MS) in a laminar multilayer pattern from a citrate bath using single bath technique (SBT). Electrodeposits having alternate layers of alloys, having different compositions were developed by modulating the direct current (DC). CMM coating configurations have been optimized from a newly developed bath, in terms of current pulse height and thickness of each layer to maximize its corrosion protection ability, in relation to its monolayer coating, developed from same bath for same time. The process and product of the Ni-W coatings have been characterized using different instrumental methods, such as cyclic voltammetry (CV), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) study. The better corrosion resistance behaviour of CMM Ni-W coatings has been analysed in the light of increased surface areas of the coatings due to layering, and results are discussed. © 2015 Elsevier B.V.Item Development of nanolaminated multilayer Ni-P alloy coatings for better corrosion protection(Royal Society of Chemistry, 2016) Elias, L.; Bhat, K.U.; Hegde, A.Nanolaminated multilayer Nickel-Phosphorous (Ni-P) alloy coatings were developed on mild steel from a citrate bath using glycerol as an additive. Multilayer Ni-P alloy coatings having nanolaminated layers of alloys of alternatively different compositions have been developed using pulsed direct current (DC) by cyclic modulation of the cathode current density. The composition and number (hence thickness) of the layers were tailored by periodic modulation of the current density (c.d.) and time using a programmable power source. The deposition conditions were optimized for both the composition and thickness of the individual layers for the best performance of the coatings against corrosion. Electrochemical corrosion study, evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) demonstrated that the multilayer Ni-P alloy coating with 300 nanolaminated layers, represented as (Ni-P)1.0/4.0/300 showed several fold better corrosion resistance compared to its monolayer counterpart (deposited using regular DC) from the same electrolytic bath. Drastic improvement in the corrosion protection efficacy of the nanolaminated multilayer Ni-P alloy coatings were attributed to an increase in number of interfaces, separating layers of alloys having different morphologies, compositions and phase structures, which was supported by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) analyses, respectively. The corrosion rates of the multilayer Ni-P alloy coatings were decreased with increasing number of layers, only up to an optimal level and then increased. The increase in corrosion rates at a higher degree of layering were attributed to the diffusion of layers, due to the very short deposition time of each layer. © The Royal Society of Chemistry 2016.Item Magnetoelectrodeposition of Ni-W alloy coatings for enhanced hydrogen evolution reaction(Royal Society of Chemistry, 2016) Elias, L.; Cao, P.; Hegde, A.The electrocatalytic efficiency of electrodeposited (ED) Ni-W alloy coatings for the hydrogen evolution reaction (HER) has been improved drastically through magnetoelectrodeposition (MED) approach. Ni-W alloy coatings have been developed under different conditions of magnetic field intensity 'B' (applied perpendicular in the range of 0.1-0.4 T), and their electrocatalytic activity for the HER has been tested using cyclic voltammetry (CV) and chronopotentiometry (CP) techniques in 1.0 M KOH solution. A drastic improvement in the electrocatalytic behavior of the MED coating, represented as (Ni-W)B=0.2 T was found as compared to its conventional Ni-W alloy coatings. Improved performance of the MED coatings was explained on the basis of differences in the process of electrocrystallization affected due to the applied magnetic field, supported by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. A magnetic field has been used advantageously for the first time to increase the W content of the alloy. Increased activity of the MED coatings was attributed to the increased W content in the alloy, characterized by the unique (220) reflection, explained by the magnetohydrodynamic (MHD) effect due to Lorentz force. © 2016 The Royal Society of Chemistry.Item Effect of magnetic field on corrosion protection efficacy of Ni-W alloy coatings(Elsevier Ltd, 2017) Elias, L.; Hegde, A.C.High corrosion resistant Ni-W alloy coatings were developed using magnetoelectrodeposition (MED) approach for the protection of mild steel substrates. The conditions for the development of more corrosion resistant MED Ni-W alloy coatings were optimized by inducing a magnetic field (B) during deposition, in terms of intensity and direction. The applied magnetic field was used as a tool to alter the crystallinity, composition and thereby the corrosion resistance of the coatings. It was demonstrated that the corrosion resistance of Ni-W alloy coatings can be improved to many folds of its magnitude by MED approach. Significant increase in corrosion resistance exhibited by MED coatings (under both parallel and perpendicular magnetic field, B) is attributed to the increased W content of the alloy affected by an increase in limiting current density (iL). The high corrosion resistance of the MED Ni-W alloy coatings was explained in the light of magnetohydrodynamic (MHD) effect, responsible for the increased W content, brought about by the enhanced mass transport. The inherent limitations of the bath like low iL and induced type of codeposition which impedes the development of W rich alloy coatings has been successfully resolved by MED method. Drastic improvement in corrosion resistance is ascribed to the basic difference in the process of electrocrystallization and phases formed during MED, confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) study. The results are discussed with greater insight into binary alloy deposition and mass transfer process at cathode/electrolyte interface. © 2017 Elsevier B.V.Item Synthesis of effective electrocatalyst for water splitting application from simple Cu-Ni bath(Allerton Press Incorporation journals@allertonpress.com, 2017) Elias, L.; Banjan, R.U.; Hegde, A.C.Electrocatalytically active Cu-Ni alloy coatings have been developed from a simple electrolyte having only Cu+2 and Ni+2 ions, without the use of any additive. Electrocatalytic character of the coatings was tested for their hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in 1.0 M KOH medium, alongside with their corrosion behaviours. Cyclic voltammetry and chronopotentio-metry study revealed that the deposition current density has a prominent role on the alkaline water splitting behaviour of the coatings, depending on their phase structure, composition and surface morphology. It was found that the c.d. has an inverse dependence on HER and OER. The Cu-Ni alloy coatings developed, respectively at 3.0 and 4.0 A dm–2, were found to be the best coatings for HER and OER, depending on the surface morphology. The electrocatalytic activity of Cu-Ni alloy coating for HER, deposited at 3.0 A dm–2 (optimal), was further improved through electrochemical dissolution of the as-deposited coating. The increase in the electrocatalytic activity for HER has been attributed to the enhancement in the exposed surface area of Ni active sites due to the leaching of Cu from the alloy matrices, evidenced by the energy-dispersive X-ray spectroscopy and scanning electron microscopy. The dependencies of HER and OER on to the surface of Cu-Ni alloy coatings were analysed in terms of deposition c.d. of the coatings, and the results are discussed. © 2017, Allerton Press, Inc.Item Effect of TiO2 nanoparticles on hydrogen evolution reaction activity of Ni coatings(University of Science and Technology Beijing, 2018) Kullaiah, R.; Elias, L.; Hegde, A.C.The electrocatalytic activity of electrodeposited Ni and Ni–TiO2 coatings with regard to the alkaline hydrogen evolution reaction (HER) was investigated. The Ni coatings were electrodeposited from an acid chloride bath at different current densities, and their HER activities were examined in a 1.0-mol·L-1 KOH medium. The variations in the HER activity of the Ni coatings with changes in surface morphology and composition were examined via the electrochemical dissolution and incorporation of nanoparticles. Electrochemical analysis methods were used to monitor the HER activity of the test electrodes; this activity was confirmed via the quantification of gases that evolved during the analysis. The obtained results demonstrated that the Ni–TiO2 nanocomposite test electrode exhibited maximum activity toward the alkaline HER. The surface appearance, composition, and the phase structure of all developed coatings were analyzed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD), respectively. The improvement in the electrocatalytic activity of Ni–TiO2 nanocomposite coating toward HER was attributed to the variation in surface morphology and increased number of active sites. © 2018, University of Science and Technology Beijing and Springer-Verlag GmbH Germany, part of Springer Nature.