Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Effect of Wire Material on Productivity and Surface Integrity of WEDM-Processed Inconel 706 for Aircraft Application(Springer New York LLC barbara.b.bertram@gsk.com, 2016) Sharma, P.; Dupadu, D.; Narendranath, S.Inconel 706 is a recently developed superalloy for aircraft application, particularly in turbine disk which is among the most critical components in the gas turbine engines. Recently, wire electrical discharge machining (WEDM) attained success in machining of gas turbine components which require complex shape profiles with high precision. To achieve the feasibility in machining of these components, the research work has been conducted on Inconel 706 superalloy using WEDM process. And, the effect of different wire materials (i.e., hard brass wire, diffused wire, and zinc-coated wire) on WEDM performance characteristics such as cutting speed, surface topography, surface roughness, recast layer formation, residual stresses, and microstructural and metallurgical alterations have been investigated. Even though, zinc-coated wire exhibits improved productivity, hard brass wire was found to be beneficial in terms of improved surface quality of the machined parts. Additionally, lower tensile residual stresses were obtained with hard brass wire. However, diffused wire has a moderate effect on productivity and surface quality. Under high discharge energy, higher elemental changes were observed and also the white layer was detected. © 2016, ASM International.Item Enhancement of surface integrity by cryogenic diamond burnishing toward the improved functional performance of the components(Springer Verlag service@springer.de, 2019) Sachin, B.; Narendranath, S.; Dupadu, D.17-4 precipitation-hardenable (PH) stainless steel is one of the widely used materials in various applications of engineering practices owing to their excellent corrosion resistance and high strength. The components such as automotive body, aerospace compressor blades, turbine blades and molds demand higher load carrying capacity and improved fatigue strength, which is possible to achieve by surface severe plastic deformation. Diamond burnishing process is an appropriate technique to produce such components which improves the surface integrity characteristics of the material. This article presents a comprehensive examination of the surface integrity of cryogenic diamond burnished 17-4 PH stainless steel using a novel diamond burnishing tool. The impact of diamond burnishing control factors on subsurface microhardness, surface roughness, surface hardness, surface topography, residual stress and surface morphology has been analyzed. The optimal control factor setting ensures the least surface roughness of 0.03 µm by the application of one factor at a time approach. Cryogenic diamond burnished surface achieves the exceptional surface finish and the surface hardness in tool-tip of 8 mm and 6 mm, respectively. The maximum surface hardness of 413 HV was attained using 6-mm tool-tip diameter. The subsurface microhardness improvement of 2% and 4% has been observed while using a tool-tip diameter of 6 mm in contrast to 8 mm and 10 mm. Compressive residual stresses have been generated at the top surface layer of the specimen. The attained experimental results prove that cryogenic diamond burnishing can be successfully applied to 17-4 PH stainless steel to enhance its surface integrity characteristics. © 2019, The Brazilian Society of Mechanical Sciences and Engineering.