Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Design, characterization and control of MR damper for two-wheeler applications(Elsevier Ltd, 2022) Devikiran, P.; Shravya, P.; Puneet, N.P.; Kumar, H.The research on Automotive systems is always an ongoing process with varied advancements in different sectors. One such sector is suspension system and the recent trends in vehicular suspension has taken a turn towards semiactive suspension considering its salient features like cost effectiveness and low power consumption with variable damping force. This research work presents the design of radial flux Magneto Rheological damper (MRD) with magnetic field analyzed using the FEMM tool. The designed MR damper has fabricated and characterized for modelling the damper in order to simulate the quarter car model of two wheeler rear suspension. The entire simulation was carried out using MATLAB/SIMULINK. © 2022Item Design and development of MR damper for two wheeler application and Kwok model parameters tuning for designed damper(SAGE Publications Ltd, 2022) Devikiran, P.; Puneet, N.P.; Hegale, A.; Kumar, H.Magnetorheological dampers have been the interest of many researchers for a few decades for the reason of being an effective and rapidly progressing technology in the field of semi-active controlled suspension. The dynamic behaviour of these devices with nonlinear hysteresis is quite a complicated phenomenon. Hence, this paper aims at the design, modelling and simulation of a custom-made MR damper for a two-wheeler vehicle. The Kwok model has been chosen to mathematically model the MR damper. The model parameters have been optimised by minimizing the error difference between experimental and model-generated force results. A PID control is designed to control the damper effectively depending on the deflection of the damper. The two-wheeler vehicle modelled with four degrees of freedom is coupled with a mathematical model of MR damper in front and rear suspension. Further, the dynamic analysis has been performed in MATLAB/Simulink considering random road input for different velocities and current input conditions. The improved performance of MR damper was observed in suppressing road irregularities using a PID controller. As an implementation part of the work, the developed damper has been implemented in a two wheeler vehicle for performance evaluation at on-road testing conditions. The results showed significant improvement in damper performance with increment of constant current controlling MR dampers. © IMechE 2021.Item Experimental and Analytical Evaluation of an Acceleration-Based Semiactive Control Strategy for Automotive Suspension Systems with Magneto-Rheological Damper(SAE International, 2023) Jamadar, M.E.H.; Devikiran, P.; Kumar, H.; Joladarshi, S.Most of the control strategies presented to date are based on either the velocities or displacement of the vehicle body and the wheel which are derived by filtering and converting the data from the accelerometer. This increases the computational load and therefore directly affects the performance of the semiactive suspension system. This study presents a control strategy purely based on the acceleration for semiactive control of vehicle suspension with a magneto-rheological MR damper. The effectiveness of the acceleration-based skyhook (ASH) control strategy is compared with the existing velocity-based skyhook (VSH) control strategy based on the vibration response of a single-degree-of-freedom (SDOF) system. The effectiveness of ASH is evaluated experimentally, and the reaction time is evaluated analytically. The experimental results revealed that the ASH reduces the peak displacement and peak acceleration of the mass under the free vibration test and also improves the settling time as compared to VSH. The amplitude of the displacement and acceleration was also found to be reduced under the forced vibration test with maximum improvement observed during high-frequency excitation. The reaction time of ASH was also found to be considerably lower than VSH. Therefore, it was learned that the proposed ASH performed better under high-frequency excitation than under lower-frequency excitation. Moreover, the lower reaction time of the ASH could improve the overall performance of the semiactive suspension system. © 2023 SAE International.Item Optimization and experimental analysis of a cost-effective magneto-rheological (MR) fluid for application in semiactive suspension of a passenger van(SAGE Publications Ltd, 2024) Jamadar, M.E.H.; Devikiran, P.; Kumar, H.; Joladarashi, S.The study presented in this article attempts to determine the optimal composition of iron particles in the MR fluid for vehicular application based on the size of the particles, the simulation response of a test vehicle model, and the cost of the fluid. The MRF samples with two different-sized particles in varying compositions are prepared and characterized on a rheometer. The performance of each MRF sample in the semiactive suspension of a test vehicle is determined by simulating its full car model on a random road. The response of the vehicle model during simulation, the size of the particles, the volume fraction of the particles in the carrier fluid, and the fluid’s calculated cost are input for the Response surface optimization technique. The optimization results revealed that the MR fluid with large-sized particles in a 25% volume fraction would be suitable for the said application. Moreover, it was found that the rheological performance of the optimized MR fluid was better than the commercial MR fluid. The performance of the optimized fluid in a MR damper was experimentally evaluated against the stock passive damper of the test vehicle. The results of the experiment on the test vehicle showed that the MR damper improved the test vehicle’s ride comfort by 36.58% over a speed bump and 11.3% on an off-road test track. The road handling was also improved by 45% over a speed bump and 46% over the test track. © IMechE 2023.Item Performance evaluation of magneto-rheological damper with spring accumulator and on-road testing by implementing in a four wheeler vehicle(Springer, 2025) Puneet, N.P.; Devikiran, P.; Kumar, H.; Gangadharan, K.V.Passenger vehicles running over roads are undergoing speedy updates every now and then in terms of design, luxury and passenger expectations. Above all, a passenger expects greater comfort in a vehicle throughout the journey. In many possible ways, semi-active suspension systems are proving themselves as optimum choice between passive and active systems. The present study emphasizes the performance analysis of a class of semi-active systems called magneto-rheological (MR) dampers. An MR damper suitable for a specific four wheeler vehicle with McPherson suspension system is designed and developed with a spring accumulator. The MR damper thus developed has undergone characterization testing subjected to variable input excitation conditions. The MR fluid for this damper is prepared in the laboratory. Sky-hook and ground-hook controllers are used as the current controlling devices. The developed MR damper is then used in the suspension system of the front half of the four wheeler vehicle for on-road testing. The developed damper showed about 20% improvement in the ride comfort level when used with the control strategies. © Indian Academy of Sciences 2025.