Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Desai, V.Subject: search.filters.subject.Particle reinforced composites

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Elevated Temperature Solid Particle Erosion Performance of Plasma-Sprayed Co-based Composite Coatings with Additions of Al2O3 and CeO2
    (Springer New York LLC barbara.b.bertram@gsk.com, 2017) Nithin, H.S.; Desai, V.; Ramesh, M.R.
    In this paper, investigation into solid particle erosion behavior of atmospheric plasma-sprayed composite coating of CoCrAlY reinforced with Al2O3 and CeO2 oxides on Superni 76 at elevated temperature of 600 °C is presented. Alumina particles are used as erodent at two impact angles of 30° and 90°. The microstructure, porosity, hardness, toughness and adhesion properties of the as-sprayed coatings are studied. The effects of temperature and phase transformation in the coatings during erosion process are analyzed using XRD and EDS techniques. Optical profilometer is used for accurate elucidation of erosion volume loss. CoCrAlY/CeO2 coating showed better erosion resistance with a volume loss of about 50% of what was observed in case of CoCrAlY/Al2O3/YSZ coating. Lower erosion loss is observed at 90° as compared to 30° impact angle. The erosion mechanism evaluated using SEM micrograph revealed that the coatings experienced ductile fracture exhibiting severe deformation with unusual oxide cracks. Reinforced metal oxides provide shielding effect for erodent impact, enabling better erosion resistance. The oxidation of the coating due to high-temperature exposure reforms erosion process into oxidation-modified erosion process. © 2017, ASM International.
  • No Thumbnail Available
    Item
    Elevated temperature solid particle erosion behaviour of carbide reinforced CoCrAlY composite coatings
    (Institute of Physics Publishing helen.craven@iop.org, 2018) Nithin, H.S.; Desai, V.; Ramesh, M.R.
    CoCrAlY+WC-Co and CoCrAlY+Cr3C2-NiCr coatings are deposited on nickel based alloy using atmospheric plasma spray technique. Mechanical properties such as microhardness, adhesion strength and fracture toughness of coatings are evaluated. Elevated temperature solid particle erosion behaviour of these coatings are investigated at 600 °C using alumina erodent at 30 and 90° impact angle. Coatings are characterized utilizing Scanning electron microscope (SEM), x-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). CoCrAlY+WC-Co coating shows higher hardness, adhesion strength and fracture toughness than CoCrAlY+Cr3C2-NiCr coating. CoCrAlY+WC-Co coating exhibited approximately 3 times higher erosion resistance than CoCrAlY+Cr3C2-NiCr coating at 90° and 30° impact angles. SEM images of eroded surfaces of coatings reveals the combination of ductile and brittle fracture. CoCrAlY+Cr3C2-NiCr coating shows severe cracks, craters, carbide pull out and chipping than CoCrAlY+WC-Co coating. High temperature erosion is a combination of simultaneous building up of material by oxidation and removal of material by erosion process. Thus reforming the erosion process to oxidation modified erosion process. © 2018 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Semi-active vibration control of SiC-reinforced Al6082 metal matrix composite sandwich beam with magnetorheological fluid core
    (SAGE Publications Ltd info@sagepub.co.uk, 2020) Allien, J.V.; Kumar, H.; Desai, V.
    Dynamic characterization of silicon carbide particles reinforced Al6082 alloy metal matrix composite sandwich beam with magnetorheological fluid core is experimentally investigated. The study is focused on determining the effect of magnetorheological fluid core on the dynamic behavior of the sandwich structure. The magnetorheological fluid core is enclosed between the top and bottom metal matrix composite beams. The metal matrix composite beams are cast with silicon carbide particles in Al6082 alloy varying from 0 to 20 wt%. The magnetorheological fluid is prepared in-house and contains 30 vol.% carbonyl iron powder and 70 vol.% silicone oil. The free vibration test is conducted to determine the natural frequencies and damping ratio. It is found that the natural frequencies and damping ratio of the sandwich beams increased with an increase in the applied magnetic flux density. The experimental forced dynamic response of sandwich beams is carried out using sine sweep excitation. Vibration amplitude suppression capabilities of the sandwich beams subjected to varying magnetic flux densities are determined. The experimental forced vibration results reveal that metal matrix composite–magnetorheological fluid core sandwich beams have excellent vibration amplitude suppression capabilities. © IMechE 2019.