Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Deepapriya, S.Subject: search.filters.subject.Potassium hydroxide

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Boosting overall electrochemical water splitting via rare earth doped cupric oxide nanoparticles obtained by co-precipitation technique
    (Elsevier Ltd, 2022) Rodney, J.D.; Deepapriya, S.; Jerome das, S.J.; Robinson, M.C.; Perumal, S.; Sadhana, S.; Periyasamy, P.; Jung, H.; Justin Raj, C.J.
    The development of electrocatalyst based on nonprecious metals has been a persistent issue as electrochemical water splitting requires electrocatalyst with advanced activity and stability. Further, the electrocatalyst must require low overpotential above the standard potential (>1.23 V) of water splitting to produce hydrogen. This study presents the facile co-precipitation derived rare earth dysprosium (Dy) doped cupric oxide nanoparticles (Cu1−xDyxO) as a non-noble transition metal oxide nanoparticle. The 3 % Dy doped CuO (3 % Dy/CuO) and 1 % Dy doped CuO (1 % Dy/CuO) electrocatalysts showed excellent Oxygen Evolution Reaction (OER) at 1.55 V vs RHE and Hydrogen Evolution Reaction (HER) at − 0.036 V vs RHE in aqueous 1 M KOH aqueous electrolyte to attain the benchmark current density (10 mA cm−2). The stability of the driven electrocatalyst in a bi-functional electrocatalytic setup was monitored for 24 h and was found to be exhibiting a cell voltage of about 2.1 V at 30 mA cm−2 constant current density. Further, the retention capability of the electrode was observed to be 99 % with a very minimal loss. This study hugely suggests the promising consequence of doping rare earth onto a non-precious metal oxide-based electrocatalyst, making it a highly effective bifunctional material for water splitting. © 2022 Elsevier B.V.
  • No Thumbnail Available
    Item
    Electrocatalytic synergies of melt-quenched Ni-Sn-Se-Te nanoalloy for direct seawater electrolysis
    (Elsevier B.V., 2024) Rodney, J.D.; Joshi, S.; Ray, S.; Rao, L.; Deepapriya, S.; Carva, K.; Badekai Ramachandra, B.R.; Udayashankar, N.K.; Perumal, S.; Sadhana, S.; Justin Raj, C.J.; Kim, B.C.
    The study focuses on the development of binary nanoalloys based on metal dichalcogenides (Sn30Se70, Ni30Te70) and quaternary nanoalloy (Ni15Sn15Se35Te35) using the melt quenching technique. The nanoalloys show extensive water splitting in fresh and real seawater. Sn30Se70-coated nickel foam achieved a benchmark current density of 349 mV for the oxygen evolution reaction (OER), while Ni15Sn15Se35Te35-coated nickel foam (NF) required only 185 mV for the hydrogen evolution reaction (HER) in 1 M KOH. The study also shows that a two-electrode system can achieve sustained total water splitting at higher current densities (1 A.cm?2). Modification with a CuSx layer over NF at the OER end facilitated faster kinetics and mitigated chlorine corrosion enabling direct seawater splitting at 1.26 V. Continuous direct splitting of seawater at 100 mA cm?2 for 120 h required only 1.88 V, showing an efficiency of 92.9 % for H2 production in real seawater. © 2024 Elsevier B.V.
  • No Thumbnail Available
    Item
    Sustained hydrogen production through alkaline water electrolysis using Bridgman–Stockbarger derived indium-impregnated copper chromium selenospinel
    (Elsevier Ltd, 2024) Jauhar, R.M.; Raji, R.; Deepapriya, S.; Raja, A.; Rao, L.; Joshi, S.; Era, P.; Badekai Ramachandra, B.R.; Udayashankar, N.K.; Vadivel, V.; Mangalaraja, R.V.; J, J.; Ghfar, A.A.; Senthilpandian, M.; Kim, B.C.; Rodney, J.D.
    The depletion of conventional fossil fuels necessitates the development of sustainable energy alternatives, with electrochemical water splitting for hydrogen (H2) production being a promising solution. However, large-scale hydrogen generation is hindered by the scarcity of cost-effective electrocatalysts to replace noble metals such as Pt and RuO2 in the Oxygen Evolution Reaction (OER) and Hydrogen Evolution Reaction (HER). In this study, we report the synthesis of CuCr2-xInxSe4 (x = 0, 0.2, 0.4) using a dual approach combining the Bridgman-Stockbarger method and ball milling. Among the synthesized materials, CuCr1.8In0.2Se4 demonstrates outstanding HER activity in 1.0 M KOH, achieving a potential of ?0.16 V vs. RHE at a current density of 10 mA cm?2. Moreover, the material shows remarkable durability during a three-electrode accelerated degradation test in an alkaline medium, maintaining its performance over 24 h at a constant current density of ?200 mA cm?2, with a stable potential of ?0.57 V vs. RHE. Additionally, CuCr1.8In0.2Se4 was tested in a two-electrode configuration alongside CoFe LDH, achieving a benchmark of 1.7 V for overall water splitting. It sustained a current density of 400 mA cm?2 for 24 h in an accelerated degradation test, exhibiting a minimal loss of 0.1 V after the testing period. These results highlight CuCr1.8In0.2Se4 as a promising non-noble metal catalyst for HER, demonstrating its potential to reduce reliance on noble materials for large-scale hydrogen production. © 2024 Hydrogen Energy Publications LLC