Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 3 of 3
  • Item
    Reusable floating polymer nanocomposite photocatalyst for the efficient treatment of dye wastewaters under scaled-up conditions in batch and recirculation modes
    (John Wiley and Sons Ltd vgorayska@wiley.com Southern Gate Chichester, West Sussex PO19 8SQ, 2019) Das, S.; Mahalingam, H.
    BACKGROUND: In the last decade, research on floating photocatalysts has increased rapidly with polymer substrates being a popular choice. However, most of the published work is on very small volumes and there is very little work on scale-up of such systems. RESULTS: Polystyrene–titanium dioxide nanocomposite floating films were prepared using a facile solvent casting method and tested for the photocatalytic degradation of four different dyes under UV irradiation. The prepared film was characterised by Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectrometry (ICP-OES) and profilometry. Scale-up studies were done in batch mode under optimised conditions, and for the larger reactor volume, the effect of recirculation was studied. Complete decolourisation of the model dye (Remazol Turquoise Blue) was observed within 80 min in the scaled-up batch process. In the recirculation mode, for a much larger volume of the dye solution, around 75% decolourisation in 6 h was observed. The reusability of the photocatalytic film was tested, and the results promise a minimum decolourisation efficiency of around 70%. Finally, total organic carbon (TOC) and liquid chromatography mass spectrometry (LC-MS) analysis were used to assess the degradation of the dye. The maximum TOC reduction observed was around 25% possibly due to the complex nature of the dye used in this study. The intermediate products of degradation were identified, and a tentative mechanism is suggested. CONCLUSION: This work demonstrates the recirculation aspects of the photocatalytic reactor under the scaled-up conditions for a complex dye. The prepared film showed excellent stability with satisfactory wastewater decontamination under UV irradiation even after repeated use. © 2019 Society of Chemical Industry. © 2019 Society of Chemical Industry
  • Item
    Exploring the synergistic interactions of TiO2, rGO, and g-C3N4 catalyst admixtures in a polystyrene nanocomposite photocatalytic film for wastewater treatment: Unary, binary and ternary systems
    (Elsevier Ltd, 2019) Das, S.; Mahalingam, H.
    Reduced graphene oxide (rGO) as well as graphitic carbon nitride (g-C3N4) were synthesised and blended along with TiO2 at specific ratios in polystyrene photocatalytic films to find out the optimum efficiency. The prepared photocatalysts were characterised by scanning electron microscopy (SEM-EDX), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR) and contact angle analyser. The SEM, XRD, and FTIR analysis indicated that the nanoparticles were evenly distributed on the surface of the polystyrene film. The stability of the polymer film with respect to possible leaching of the embedded catalyst particles was evaluated by ICP-OES analysis. The photocatalytic activity of the admixture was evaluated using remazol turquoise blue dye as a model organic pollutant, and it was found that the photocatalytic ternary admixtures displayed much higher photocatalytic activity (99%) than the unary (89%) or binary (94%) mixtures indicating the synergistic effect of these catalysts. The effect of catalyst ratio, immobilisation, pH, initial dye concentration, irradiated light source, the presence of H2O2 and reusability of the film were also evaluated. The degradation of the dye is confirmed by TOC analysis (40% reduction), and HPLC/MS was used to identify the final degraded compounds. © 2019 Elsevier Ltd.
  • Item
    Dye degradation studies using immobilized pristine and waste polystyrene-TiO2/rGO/g-C3N4 nanocomposite photocatalytic film in a novel airlift reactor under solar light
    (Elsevier Ltd, 2019) Das, S.; Mahalingam, H.
    Complex dyes are not completely removed in most wastewater treatment plants and thus released into nearby waterbodies posing problems to aquatic life and humans. In this study, a chemically synthesized nanocomposite photocatalyst containing TiO2, rGO and g-C3N4 immobilized in a polystyrene film is evaluated for the degradation of the Cu-phthalocyanine complex dye (Remazol Turquoise Blue, RTB) in a multiphase airlift reactor under sunlight. Both pristine and waste polystyrene were used in the synthesis of the film. The characterisation of the powder photocatalyst composite as well as the immobilized photocatalyst film is performed using particle size analyzer, SEM-EDX, BET, XRD, XPS, FTIR, and ICP-OES. The optimization of various parameters affecting the photocatalytic decolourization such as the g-C3N4 quantity in the composite catalyst, catalyst loading, the initial concentration of dye, use of waste polystyrene and catalyst reuse has been studied thoroughly. The photocatalytic treatment of RTB dye under optimum conditions for 90min shows that the decolourization (60%) and degradation (51.43%) as measured by TOC analysis are quite similar. The possible breakdown compounds from the parent molecule after the photocatalytic operation are identified by HPLC-MS. In conclusion, the immobilized nano-composite photocatalyst incorporated into a multiphase airlift reactor, is a very promising system to improve the water quality by TOC reduction, before discharge to nearby natural water sources. © 2019 Elsevier Ltd.