Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Electrochemical performance of activated carbon-supported vanadomolybdates electrodes for energy conversion(Elsevier Ltd, 2021) Maity, S.; Anandan Vannathan, A.; Kella, T.; Shee, D.; Das, P.P.; Mal, S.Reinforcing polyoxomolybdates (POMs) into the activated carbon (AC) template engenders a nanohybrid electrode material for high-performance supercapacitor applications. Herein, a first-time novel integration of two polyoxometalates ([PVMo11O40]4-, [PV2Mo10O40]5-) with AC has been demonstrated, and their structural and electrochemical performances were analyzed. AC-VMo11 composite displayed an enhanced capacitance of 450 Fg-1 with an improved energy density of 59.7 Whkg-1. Furthermore, the symmetric supercapacitor cell for AC-VMo11 and AC-V2Mo10 showed high cell capacitances of 38.8 and 20.01 mF, respectively, alongside 99.99% capacitance retention of over 5000 cycles. In addition, the influence of ionic liquid as an electrolyte on AC-V2Mo10 based supercapacitor cell was investigated in tetrabutylammonium bromide (TBAB) electrolyte solution. © 2021 Elsevier Ltd and Techna Group S.r.l.Item Decavanadate-graphene oxide nanocomposite as an electrode material for electrochemical capacitor(Taylor and Francis Ltd., 2022) Maity, S.; Das, P.P.; Mal, S.We have synthesized new electrode material for the supercapacitor application. Polyoxovanadates (POVs) have been used for energy storage electrode materials due to their fast multi-electron redox properties. The formation of SDV/GO composites was confirmed using various analytical methods, e.g., Fourier transforms infrared spectroscopy (FTIR) and powder X-ray diffraction (XRD), followed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The composite electrode’s electrochemical behavior was studied using a neutral 1 M sodium sulphate (Na2SO4) solution in three-electrode cyclic voltammetry (CV) system. The SDV/GO composite electrode showed a specific capacitance of 306 F/g for a scan rate of 5 mV/s and a corresponding energy density of 42.4 Wh/Kg. Galvanostatic charge/discharge exhibits a specific capacitance of 310 F/g with energy densities of 43.08 Wh/kg. Electrochemical impedance spectroscopy (EIS), which was used to investigate interface property, yielded a considerably higher power density of 172.41 KW/kg with an equivalent series resistance of 5 ?. © 2021 Informa UK Limited, trading as Taylor & Francis Group.Item Fabrication of supercapacitor electrode material using carbon derived from waste printer cartridge(Springer Science and Business Media Deutschland GmbH, 2024) Biradar, B.R.; Maity, S.; Chandewar, P.R.; Shee, D.; Das, P.P.; Mal, S.S.Transforming recyclable materials into a suitable product is an important area of research nowadays. This report demonstrates that carbon material derived from waste printer cartridges can be exploited to fabricate electrochemical cells—particularly supercapacitors (SCs). SCs are electrochemical energy storage devices currently attracting much attention in the research community due to their salient features, such as cost-effectiveness, extended cycle stability, and durability. Here, we report the results of thoroughly examining the effects of acidic, basic, and neutral aqueous electrolytes on printer waste carbon electrode material in SC efficiency. In our work, the waste carbon collected from used printer cartridges shows a specific capacitance of 178.4 F/g with energy and power density of 24.77 Wh/kg and 999.68 W/kg, respectively, at 0.5 A/g current density in acidic (1 M H2SO4) electrolyte medium. Moreover, it exhibited very promising capacitance of 135.04 F/g and 87.04 F/g in basic (1 M LiOH) and neutral (1 M NaCl) electrolyte medium, respectively, at 0.8 A/g current density with considerably better cycle stability. In an acidic medium, printer waste carbon drives a DC motor for 1 min with a three-cell series arrangement. The properties of that waste carbon (extracted from the cartridges) are similar to high-rate activated carbon available commercially. Graphical Abstract: (Figure presented.). © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.Item Carbon Nanotube-Supported Vanadium Substituted Phospho-Molybdate Nanohybrid for Supercapacitor Applications(John Wiley and Sons Inc, 2025) Biradar, B.R.; Swetha, M.T.; Thathron, N.; Puniyanikkottil, M.A.; Hanchate, A.; Das, P.P.; Mal, S.S.Owing to the depletion of conventional energy sources, our civilization is slowly transitioning to renewables. Therefore, designing effective energy storage systems is one of the most pressing technical demands. The quest for improved energy and power densities in energy storage devices, particularly those with long cycle life, has pushed the investigation of novel materials intended to build effective supercapacitors. In this work, nanohybrid materials are synthesized using a hydrothermal technique by mixing carbon nanotubes and a polyoxometalate cluster, H4[PVMo11O40].xH2O. Henceforth, this complex is acronymed as CNT-PVMo11. Further, electrochemical analysis of CNT-PVMo11 nanohybrid is carried out to examine various characteristics of the supercapacitor cell made with this nanohybrid. The cyclic voltammetry confirms the diffusive-dominant charge-storage process, quantifying a 72.83% diffusion mechanism at a scan rate of 1 mV s?1. The galvanostatic charge–discharge analysis of CNT-PVMo11 nanohybrid material showed a specific capacitance of 229.35 F g?1 with energy and power densities of 31.85 Wh kg?1 and 2000 W kg?1, respectively, at 1 A g?1 current density. The electrode material also shows 90% capacitance retention even after 6000 cycles at 8 A g?1 current density, indicating the material's remarkable stability. The high specific capacitance, excellent energy density, and impressive cycling stability of the hybrid material make it a promising candidate for next-generation supercapacitor electrodes. © 2025 Wiley-VCH GmbH.