Faculty Publications

Now showing 1 - 3 of 3

Effect of various additives on the properties of fly ash based geopolymer mortar
(Springer, 2019) Mustafa, R.; Shivaprasad, K.N.; Das, B.B.
In the present study, setting time and variation in strength of fly ash based geopolymer mortar prepared from natural sand as fine aggregates. Blast furnace slag (GGBS), micro silica and lime dust used as additives to fly ash based geopolymer mortar at 5, 10 and 15% of weight of fly ash. Alkaline activator used in the present study is combination of sodium silicate solution and sodium hydroxide solution. Concentration of sodium hydroxide solution was maintained 10 M and sodium silicate to sodium hydroxide ratio was fixed as 2.5:1 by weight. From the test results, it is observed that setting time and compressive strength geopolymer samples were significantly influenced by the type of additive added in the preparation of the geopolymer mortar. © Springer Nature Singapore Pte Ltd. 2019.
Fast Setting Steel Fibre Geopolymer Mortar Cured Under Ambient Temperature
(Springer, 2021) Prasanna, K.M.; Theodose, I.; Shivaprasad, K.N.; Das, B.B.
Cement and cementitious materials are being used worldwide as the most popular multipurpose construction materials but the greenhouse gas such as carbon dioxide (CO2) produced during its manufacturing process creating a huge environmental hazard, thus efforts have been made for alternative binders. Geopolymer binder is new age binder alternative to ordinary Portland cement in infrastructure projects because it is produced from eco-friendly and industrial waste materials. This study was aimed to produce fast setting with ground-granulated blast-furnace slag (GGBS) in fly ash-based geopolymer mortar incorporated with steel fibres cured under ambient temperature. In this research, alkaline to binder ratio was varied from 0.5 to 0.8, crimped steel fibre are varied from 0.5 to 1.5% by total volume of binder and combination of fly ash (FA) and GGBS (100%:0%, 90%:10%, 80%:20%, 70%:30%, 60%:40% and 50%:50%) as binder were used for preparation of fibre geopolymer mortar. The tests conducted include stetting time and flowability of geopolymer mortar, compressive strength and microstructural characterisation of steel fibre geopolymer mortar. The tests for compressive strength were carried out on standard size of mortar samples at curing period of 3, 7 and 28 days. It is noted from the test results that increase in GGBS content setting times were decreased; however, the compressive strength of fly ash-based geopolymer mortar increased. The highest compressive strength at 28 days of curing period was found to be 69.5 MPa, which is obtained with content of 1% of steel fibres and alkaline to binder ratio of 0.6 with 50%:50% binder’s proportions. Further, it is observed that the incorporation of steel fibres in plain geopolymer mortar have enhanced the compressive strength and optimum dosage of fibres was found to be 1%. © 2021, Springer Nature Singapore Pte Ltd.
Potential utilization of regional cashew nutshell ash wastes as a cementitious replacement on the performance and environmental impact of eco-friendly mortar
(Elsevier Ltd, 2023) Manjunath, B.; Ouellet-Plamondon, C.M.; Das, B.B.; Bhojaraju, C.
Globally, agro-waste ashes are increasing significantly due to the rapid implementation of biomass-based power plants. In the present trend, agro-wastes are disposed of in an unsustainable manner. The recycling of agro-waste has significantly contributed to sustainable goals. In the construction sector, it is possible to dispose of waste more efficiently. However, the efficiency of locally available agro-residual waste in cementitious composites is not well understood. In the present investigation, the practicability of using agro-residual ash obtained from the burning of cashew nutshells on the properties of eco-friendly blended cement paste and mortars is explored. Blended cement mixtures containing cashew nutshell ash (CNSA) were prepared at five replacement levels, 5, 10, 15, 20, and 25%, relative to the weight of the cement. To understand the characteristics of CNSA, microstructure investigations such as X-ray diffraction, thermogravimetric analysis (TGA), scanning electron microscopy, and energy-dispersive spectroscopy analyses were performed. Paste properties of CNSA-based cement are observed through consistency, setting time, mini-slump flow, and expansion tests. For the CNSA-based mortars flow table, compressive strength, ultrasonic pulse velocity (UPV), electrical resistivity (ER), water absorption, bulk density, and porosity tests were performed to understand its efficiency. The strength indices of mortars were used to quantify the pozzolanic effect of CNSA. With the incorporation of CNSA, water demand increased by 57%, initial and final setting time decreased by 90% and 83%, respectively. Results showed that CNSA-based mortars absorbed more water and had higher porosity, which reduced compressive strength, UPV, and ER values. CNSA blended mortar is more suitable for applications that do not require high compressive strength. Results indicated that the compressive strength, UPV, and ER are within the limit specified. Strength indices indicated that CNSA has a positive and negative pozzolanic effect during early and later ages, respectively. Further, the sustainable assessment showed that the introduction of CNSA in mortar could substantially reduce embodied carbon, embodied energy, and strength efficiency over the control mortar. The inadequate amount of SiO2, Fe2O3, and Al2O3 in CNSA makes it an unsuitable pozzolanic material. However, it can be utilized in smaller amounts as a fractional replacement of cement and is found to be promising for specific desired properties of cement as a cost-effective accelerator. © 2023 Elsevier Ltd

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results