Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item A Transformerless Photovoltaic Microinverter using High-gain Z-Source Boost Converter for Single-phase Grid connected Applications(Institute of Electrical and Electronics Engineers Inc., 2020) Prabhu, N.S.; Damodaran, R.; Balasubramanian, B.; Mishra, S.Microinverters are the latest advancements in the area of photovoltaic (PV) technology due to their compact design. They improve energy efficiency of PV systems due to the reduced effect of non-uniform operating conditions caused primarily by shading. However due to the low output voltage rating of PV modules, high output to input voltage gain ratio is required for microinverters integrated to the utility grid. Several of the existing techniques use transformers or coupled inductors to achieve high gain ratios. These often require precise design and increase the size and cost of the PV system. The Z-source network based high-gain converters can offer superior performance with reduced components, size and cost. However their operation in a microinverter for grid connected applications have not yet been studied. Therefore this paper presents a novel microinverter utilizing a high-gain Z-source boost converter followed by an H-bridge inverter. The principle of operation of the microinverter is detailed and the overall gain ratio is obtained. The operating region in the I-V characteristics of PV module is determined and the control strategies implemented are discussed in detail. Simulations are performed in MATLAB/Simulink platform to validate the performance of the proposed microinverter under possible operating condition. © 2020 IEEE.Item A novel AC module with high gain Z-Source converter and pseudo DC-link inverter(Institute of Electrical and Electronics Engineers Inc., 2020) Damodaran, R.; Dastagiri Reddy, B.D.; Balasubramanian, B.The effects of partial shading in low power PV systems can be considerably reduced by using a single PV module of appropriate rating. Such a system is termed as the AC module in the literature and consists of a PV module along with the required power electronic circuitry, known as module integrated converter (MIC). The AC module integrated with the grid is required to operate at high efficiency and provide an output voltage of the expected magnitude and frequency. In this paper an efficient MIC with pseudo DC-link (pDC-l) for grid integration of AC module is proposed. The proposed MIC is claimed to be high efficient due to the fundamental frequency operation of the inverter. To obtain a pDC-l of required magnitude from single photovoltaic (PV) module, a high gain Z-source buck-boost converter (ZBBC) is used. It is followed by an unfolding circuit which operates at fundamental frequency to convert the pDC-l to sinusoidal output. The fundamental frequency operation reduces the switching losses without affecting the total harmonic distortion (THD). The operation of the ZBBC, when used to obtain a pDC-l output is analysed and a simple closed loop control is developed. The control ensures a pseudo DC-link voltage at the input of the H-bridge that acts as an unfolding circuit. The control also ensures power balance by controlling the current injected to the grid. Simulations of the proposed AC module with ZBBC cascaded with pDC-l inverter have been carried out using MATLAB/Simulink platform and the results are presented to validate the proposed MIC and its closed loop control. © 2020 IEEE.Item Effect of Partial Shading on PV Fed Induction Motor Water Pumping Systems(Institute of Electrical and Electronics Engineers Inc., 2019) Mudlapur, M.; Ramana, V.V.; Damodaran, R.; Balasubramanian, B.; Mishra, S.Partial shading is one of the certain conditions in photovoltaic (PV) power plants. Often the panels get partially shaded due to soiling, clouds, and trees. The effect of shading is of high concern and importance especially in applications such as water pumps due to agricultural environments in which they are employed in. However, the research focus on PV fed pumps till date has been restricted to only uniform shading conditions. Unlike uniform shading conditions during maximum power tracking, where the panel voltage remains almost constant for an entire range of irradiance, partial shading offer conditions such as highly variable panel voltage and transitions of intermediate DC-DC power converter from continuous conduction mode to discontinuous conduction mode. These effects severely affect the performance of the power converter and, therefore, the power output of the pump. This paper presents a study on the effects caused by partial shading conditions on pumps through simulations and verified by experimentations. The simulation and experimental results are found to be in good agreement with each other. This research thus helps in understanding the detrimental effects caused by partial shading conditions and thus serves as a reference tool for practitioners who wish to study PV fed pumps. © 1986-2012 IEEE.