Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Chavan, S.Subject: search.filters.subject.Phase change materials

Search Results

Now showing 1 - 6 of 6
  • No Thumbnail Available
    Item
    Phase change materials in chemical and process engineering
    (Elsevier, 2023) Chavan, S.; Manickam, M.; Arumuga Perumal, A.P.; Gumtapure, V.
    This chapter is concerned with phase change materials in chemical and process engineering. Industrial waste heat recovery is explored as a source of heating and cooling with the application of phase change materials, which is well known. Consequently, heat transformation technologies are presented in detail along with their technical and economic potentials. Initially, utilization of phase change materials in process industries is discussed, which covers on-site and off-site industrial applications. The concept of on-site and off-site thermal energy utilization is well defined. The large amount of industrial waste heat is generated, which can be stored in the phase change materials, and it can be transported to the place where there is energy requirement in particular. Industries such as metal manufacturing, nonmetal manufacturing, chemicals and chemical products, pulp, and food processing industries are the main focuses of the present study. All the technical aspects are discussed in detail with respect to the future scope of phase change materials with thermal energy storage systems. Thermal energy utilization using phase change materials for chemical process industries also has great potentiality for various applications such as thermal fluid heating systems, gas-fired systems, and solar heating systems, which are also discussed. A comprehensive study has been carried out for potential usage of phase change materials for various manufacturing and process engineering applications. © 2023 Elsevier Ltd. All rights reserved.
  • No Thumbnail Available
    Item
    Cooling packing and cold energy storage
    (Elsevier, 2023) Chavan, S.; Manickam, M.; Arumuga Perumal, A.P.; Gumtapure, V.
    This chapter is divided into two parts: first part discusses about cooling packing applications of phase change materials, and second part discusses about cold thermal energy storage application of PCM. Consequently, methods of thermal energy storage are briefly explained, specifically for cooling packing applications along with present challenges of the technology. The second part of the chapter discusses in brief about cold thermal energy storage specifically basic working principle, loading of cold thermal energy storage for operational purposes CTES in selecting and characterizing storage media, water versus ice thermal energy storage, PCM used for cold thermal storage, advantages, disadvantages, and finally, battery thermal management system in electric vehicle are discussed in brief with updated knowledge in the field of real-time application. © 2023 Elsevier Ltd. All rights reserved.
  • No Thumbnail Available
    Item
    Characterization of linear low-density polyethylene with graphene as thermal energy storage material
    (Institute of Physics Publishing helen.craven@iop.org, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
    In this work authors reported the preparation and characterization of composite phase change material (CPCM) using the direct-synthesis method by blending the Linear low-density polyethylene (LLDPE) with Carboxyl Functionalized Graphene (f-Gr). LLDPE is selected as base material and f-Gr is dispersed into three different concentrations 1.0, 3.0, and 5.0 wt% and referred as CPCM-1, CPCM-2 and CPCM-3 respectively. Experimental analysis is carried out through Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Differential scanning calorimeter (DSC). The preset study assesses the influences of nanoparticle concentration on thermophysical properties, thermal performance and thermal storage characteristics of CPCMs. Results show that addition of f-Gr improves the thermal conductivity and latent heat of fusion of LLDPE. However, f-Gr slightly reduces the melting temperature and decreased the crystallization temperature. Therefore, this study reveals that f-Gr, addition to LLDPE has substantial potential for improving the thermal energy storage performance. © 2019 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Computational investigation of bounded domain with different orientations using CPCM
    (Elsevier Ltd, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
    The present work deals with the composite phase change material (CPCM) of 98% paraffin wax and 2% copper nanoparticle, filled into the bounded domain. Effects of orientation (45° 90° 135° and 180°) with different wall heating conditions (base, left and top wall) are analyzed numerically to understand the flow patterns and interface morphology developed during melting/solidification processes. The melting/solidification mechanism exhibited non-uniform flow patterns and irregular morphology which are dependent on geometrical orientations and different wall heating conditions. The results revealed that the bounded domain with different orientations have significant effect on natural convection current formation. As the orientation changes, the heat transfer rate gets influenced significantly and convection currents amplifies. Top wall heating arrangement of 180° orientation shows competence in achieving better thermal performance. © 2019 Elsevier Ltd
  • No Thumbnail Available
    Item
    Numerical and experimental analysis on thermal energy storage of polyethylene/functionalized graphene composite phase change materials
    (Elsevier Ltd, 2020) Chavan, S.; Gumtapure, V.; Arumuga Perumal, A.P.
    The main driving force behind the present work is environmental issues caused due to the usage of plastics, and energy issues. Current work attempts to address these problems by converting recycled plastics into thermal storage materials (TSM). Unfavorable thermophysical properties of plastic make it impractical but these inadequacies can be amended by blending with additives of superior thermophysical properties like, functionalized graphene. Numerical and experimental analysis are carried out to assess the thermal performance of TSMs (LLDPE, CPCM-1, CPCM-2 and CPCM-3) and check the compatibility of the materials. The phase change temperature of TSM is 123 to 125 °C and heat of fusion is 71.95 to 97 kJ/kg. Several thermal characteristics are analyzed to assess thermal performance and the amount of heat energy supplied, rate of heat transfer, and heat storage efficiency are deliberated. Results shown energy level enhancement of 43.17, 50.42, 54 and 50.61% for LLDPE, CPCM-1, CPCM-2 and CPCM-3 respectively. Among the TSM CPCM-2 shows relatively better storage capability (54% enhancement) due to incorporation of optimum concentration of enhancing material. The solidification process takes place through convection and radiation mode of heat transfer, at the completion of solidification process the TSM energy content reduces to 97.5, 96, 96 and 96% for LLDPE, CPCM-1,CPCM-2 and CPCM-3 respectively. This work concludes that, recycled plastics can be blended and it can be converted into efficient thermal storage material. © 2019 Elsevier Ltd
  • No Thumbnail Available
    Item
    Performance assessment of composite phase change materials for thermal energy storage-characterization and simulation studies
    (Bentham Science Publishers, 2021) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.
    Background: The present study mainly focuses on the development of new Thermal Storage Materials (TSM) and compare the performance for thermal energy storage capacity. Linear Low-Density Polyethylene (LLDPE) based Composite Phase Change Materials (CPCMs) is prepared, and its properties are analyzed using characterization, analytical calculations, and numerical simulation meth-ods. The composites are prepared by blending the functionalized graphene nanoparticles (1, 3 & 5%) with three different concentrations into LLDPE. All three CPCMs show enhanced thermal performance compared to the base material, but it is noticed that higher concentrations of nanoparticles increase the dynamic viscosity and produce an adverse effect on thermal performance. Thermal characterization shows improved latent heat capacity with nanoparticle concentration, analytical and numerical results also compared, which shown a difference of 10 to 25%. Objective: The purpose of this study is the development and evaluation of the thermal storage capacity of different thermal storage materials and enlighten the techniques used for characterizing the storage materials. Methods: Composite material preparation is carried out by using twin-screw extruders, characterization of developed material is done through FTIR, SEM, and DSC analysis. For complete analysis character-ization, analytical calculations and numerical simulation methods are used. Results: Linear low-density polyethylene-based composite materials can be successfully developed using a twin-screw extruder. This extrusion provided proper dispersion of nanoparticles into the base material, and it is validated by SEM analysis. DSC analysis confirmed the enhancement in the thermo-physical properties of composite materials. Conclusion: The latent heat capacity increased around 20% during the heating cycle and reduced ap-proximately 23% during the cooling cycle for base material and 5% addition of nanoparticle, respec-tively. The comprehensive study accomplishes that the optimum concentration of nanoparticle provides better thermal performance for thermal energy storage applications. © 2021 Bentham Science Publishers.