Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Chavan, S.Subject: search.filters.subject.Composite phase change materials

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    A review on thermal energy storage using composite phase change materials
    (Bentham Science Publishers, 2018) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
    Background: This paper intends to provide the elementary understanding about the development of thermal energy storage systems. Reviews of storage system performance are carried out from various characterization studies, experimental work, numerical investigations and patents. Several techniques employed to enhance the thermal performance have been reviewed and discussed. Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Objective: The purpose of this study is to give an outline and history of the thermal energy storage systems and enlighten the techniques used for storage density enhancement without significant modifications in the design. Methods: In this study, three methods such as, characterization studies, experimental work, numerical investigations and patents. It also addresses many research articles and recent patents on the thermal storage systems, various techniques adopted and applications of such systems. Results: Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Carbon based nanoparticles show excellent properties in the composite phase change materials. Conclusion: Composite phase change materials have greater potential for thermal energy storage applications and especially carbon-based nanoparticles like graphene, graphene oxide, carbon nanotubes, fullerene, graphite, graphite oxide, extracted graphite etc., are greatly enhancing the thermo-physical properties of composite phase change materials. Combination of paraffin-based phase change materials and carbon-based nanoparticles can be used for the future thermal energy storage applications. © 2018 Bentham Science Publishers.
  • No Thumbnail Available
    Item
    Characterization of linear low-density polyethylene with graphene as thermal energy storage material
    (Institute of Physics Publishing helen.craven@iop.org, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
    In this work authors reported the preparation and characterization of composite phase change material (CPCM) using the direct-synthesis method by blending the Linear low-density polyethylene (LLDPE) with Carboxyl Functionalized Graphene (f-Gr). LLDPE is selected as base material and f-Gr is dispersed into three different concentrations 1.0, 3.0, and 5.0 wt% and referred as CPCM-1, CPCM-2 and CPCM-3 respectively. Experimental analysis is carried out through Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Differential scanning calorimeter (DSC). The preset study assesses the influences of nanoparticle concentration on thermophysical properties, thermal performance and thermal storage characteristics of CPCMs. Results show that addition of f-Gr improves the thermal conductivity and latent heat of fusion of LLDPE. However, f-Gr slightly reduces the melting temperature and decreased the crystallization temperature. Therefore, this study reveals that f-Gr, addition to LLDPE has substantial potential for improving the thermal energy storage performance. © 2019 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Computational investigation of bounded domain with different orientations using CPCM
    (Elsevier Ltd, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
    The present work deals with the composite phase change material (CPCM) of 98% paraffin wax and 2% copper nanoparticle, filled into the bounded domain. Effects of orientation (45° 90° 135° and 180°) with different wall heating conditions (base, left and top wall) are analyzed numerically to understand the flow patterns and interface morphology developed during melting/solidification processes. The melting/solidification mechanism exhibited non-uniform flow patterns and irregular morphology which are dependent on geometrical orientations and different wall heating conditions. The results revealed that the bounded domain with different orientations have significant effect on natural convection current formation. As the orientation changes, the heat transfer rate gets influenced significantly and convection currents amplifies. Top wall heating arrangement of 180° orientation shows competence in achieving better thermal performance. © 2019 Elsevier Ltd
  • No Thumbnail Available
    Item
    Numerical and experimental analysis on thermal energy storage of polyethylene/functionalized graphene composite phase change materials
    (Elsevier Ltd, 2020) Chavan, S.; Gumtapure, V.; Arumuga Perumal, A.P.
    The main driving force behind the present work is environmental issues caused due to the usage of plastics, and energy issues. Current work attempts to address these problems by converting recycled plastics into thermal storage materials (TSM). Unfavorable thermophysical properties of plastic make it impractical but these inadequacies can be amended by blending with additives of superior thermophysical properties like, functionalized graphene. Numerical and experimental analysis are carried out to assess the thermal performance of TSMs (LLDPE, CPCM-1, CPCM-2 and CPCM-3) and check the compatibility of the materials. The phase change temperature of TSM is 123 to 125 °C and heat of fusion is 71.95 to 97 kJ/kg. Several thermal characteristics are analyzed to assess thermal performance and the amount of heat energy supplied, rate of heat transfer, and heat storage efficiency are deliberated. Results shown energy level enhancement of 43.17, 50.42, 54 and 50.61% for LLDPE, CPCM-1, CPCM-2 and CPCM-3 respectively. Among the TSM CPCM-2 shows relatively better storage capability (54% enhancement) due to incorporation of optimum concentration of enhancing material. The solidification process takes place through convection and radiation mode of heat transfer, at the completion of solidification process the TSM energy content reduces to 97.5, 96, 96 and 96% for LLDPE, CPCM-1,CPCM-2 and CPCM-3 respectively. This work concludes that, recycled plastics can be blended and it can be converted into efficient thermal storage material. © 2019 Elsevier Ltd
  • No Thumbnail Available
    Item
    Performance assessment of composite phase change materials for thermal energy storage-characterization and simulation studies
    (Bentham Science Publishers, 2021) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.
    Background: The present study mainly focuses on the development of new Thermal Storage Materials (TSM) and compare the performance for thermal energy storage capacity. Linear Low-Density Polyethylene (LLDPE) based Composite Phase Change Materials (CPCMs) is prepared, and its properties are analyzed using characterization, analytical calculations, and numerical simulation meth-ods. The composites are prepared by blending the functionalized graphene nanoparticles (1, 3 & 5%) with three different concentrations into LLDPE. All three CPCMs show enhanced thermal performance compared to the base material, but it is noticed that higher concentrations of nanoparticles increase the dynamic viscosity and produce an adverse effect on thermal performance. Thermal characterization shows improved latent heat capacity with nanoparticle concentration, analytical and numerical results also compared, which shown a difference of 10 to 25%. Objective: The purpose of this study is the development and evaluation of the thermal storage capacity of different thermal storage materials and enlighten the techniques used for characterizing the storage materials. Methods: Composite material preparation is carried out by using twin-screw extruders, characterization of developed material is done through FTIR, SEM, and DSC analysis. For complete analysis character-ization, analytical calculations and numerical simulation methods are used. Results: Linear low-density polyethylene-based composite materials can be successfully developed using a twin-screw extruder. This extrusion provided proper dispersion of nanoparticles into the base material, and it is validated by SEM analysis. DSC analysis confirmed the enhancement in the thermo-physical properties of composite materials. Conclusion: The latent heat capacity increased around 20% during the heating cycle and reduced ap-proximately 23% during the cooling cycle for base material and 5% addition of nanoparticle, respec-tively. The comprehensive study accomplishes that the optimum concentration of nanoparticle provides better thermal performance for thermal energy storage applications. © 2021 Bentham Science Publishers.