Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Development of resilient breakwater against earthquake and Tsunami(American Society of Civil Engineers (ASCE) onlinejls@asce.org, 2019) Chaudhary, B.; Hazarika, H.; Murakami, A.; Fujisawa, K.The coastal areas in Japan suffered devastating damage due to the great East Japan earthquake and tsunami in 2011. Breakwaters collapsed mainly because of foundation failures during the earthquake and tsunami. Due to the breakwater failures, the tsunami entered the coastal zones and imposed deep devastation. This study focused on the development of reinforcing countermeasures for a breakwater foundation that can produce a resilient breakwater against earthquakes and tsunamis, such as foundations reinforced with sheet piles and gabions. Physical model tests were carried out for scaled-down breakwater models to examine the performance of the reinforcing countermeasures under an earthquake and tsunami. During the tests, the developed reinforced model was found to be effective in mitigating the damage of the breakwater created by the earthquake and tsunami. Numerical simulations were performed to further clarify the mechanism. © 2018 American Society of Civil Engineers.Item Seismic stability evaluation of rubble mound breakwater: Shake table tests and numerical analyses(Elsevier Ltd, 2024) Akarsh, P.K.; Chaudhary, B.; Sajan, M.; Kumar, S.; Sah, B.Rubble mound (RM) breakwaters are coastal structures constructed to provide tranquil condition around the port areas. After past earthquakes such as the 2004 Indian Ocean earthquake and the 2011 Great East Japan earthquake, it was found that stability of breakwater not only depends on the wave action but seismic motions also play an important role for this. Very limited studies are available for the stability evaluation of RM Breakwater under earthquake motions by conducting physical model tests. To the end, an attempt has been made in the study to evaluate the stability of RM breakwater subjected to earthquake loadings. A series of shaking table tests conducted to evaluate the seismic behaviour of the RM breakwater. A prototype RM breakwater is modelled on two layers of seabed foundation soil. Different amplitudes of sinusoidal seismic motions (foreshocks and main shock) are provided at the base of the model. Later, the breakwater stability was evaluated for real earthquake motions. Various parameters such as settlement, horizontal displacement, acceleration-time histories and excess pore water pressure were measured during the tests. Deformation pattern was also studied by photos and videos captured during the tests. During the mainshock, the crown wall settled by 111 % more comparable to second foreshock; and the structure laterally displaced by more than 200 % comparable with first foreshock. The peak acceleration of input wave amplified while it was travelling from bottom to the crest of breakwater. The excess pore water pressure was maximum beneath the rubble mound, in loose sand and it was five times more during the mainshock compared to first foreshock. Due to loss in bearing capacity of foundation soil, the breakwater collapsed. Also, the effects like rolling down of armor units, densification and slumping of core material, shear deformation of breakwater body were observed during the main shock. Thus, the breakwater failed during the mainshock. Numerical analyses were also executed for both sinusoidal and real earthquake motions to make clear the mechanism of the breakwater behaviour subjected to the earthquake loadings. © 2024 Elsevier LtdItem Novel technique to mitigate the earthquake-induced damage of rubble mound breakwater(Elsevier Ltd, 2024) Akarsh, P.K.; Chaudhary, B.; Sajan, M.; Sah, B.; Kumar, S.In past, the 2004 Indian Ocean earthquake and the 2011 Great East Japan earthquake had caused collapse of many breakwaters due to failure of their foundations. The seismic behaviour of rubble mound (RM) breakwater is not well understood may be due to limited number of research works done in the area. Therefore, in the present study, a series of shaking table tests were conducted for RM breakwater in order to determine the exact reasons and mechanisms of failure of the breakwater during an earthquake. In addition, a novel countermeasure technique was developed to mitigate the earthquake-induced damage of RM breakwater. The countermeasure model dealt with geobags as armour units on the both sides instead of conventional armours to increase the stability. The developed model has geogrid and sheet piles in seabed foundation soils of the breakwater. The effectiveness of countermeasure model was examined by comparing with conventional RM breakwater model considering parameters like settlement, horizontal displacement, acceleration-time histories, excess pore water pressure and deformation patterns. Numerical analyses were done to elucidate the failure mechanisms. Overall, the developed model was found to be resilient breakwater against the earthquakes; and the technique could be adopted in practical use on the real ground. © 2023 Elsevier LtdItem Response of Suction Caisson Foundations for Offshore Wind Turbines Subjected to Earthquake Loading: Numerical Simulations(Springer, 2025) Kumar, S.; Sah, B.; Chaudhary, B.Installation of offshore wind turbines (OWTs) increases exponentially in order to meet the demand of energy and to achieve a huge target of renewable energy for reducing carbon emission. Several OWTs are being built in seismic zones. The safety of OWTs that utilize suction bucket foundations is significantly depended on earthquake threat and liquefaction. This study examined the suction bucket's performance for OWTs situated in liquefiable sand when exposed to wind and seismic forces. To conduct nonlinear dynamic assessments, three-dimensional numerical models were created by using FEM program PLAXIS 3D, simulating the sandy seabed using the Mohr–Coulomb constitutive model. The study concentrated on evaluating a number of variables, including wind forces, seismic effects, bucket aspect ratios, and sand densities, that affect the way suction bucket foundations behave seismically. The investigation looked at how the OWT responded to combined earthquake and wind loading circumstances in terms of acceleration, horizontal displacements, excess pore water pressure ratios, and settlements. It was observed in the study that the OWT could undergo permanent tilting that surpasses the state of the serviceability limit, a result of the combined impact of wind, earthquakes, and liquefaction. The research also examined the deformation mechanisms of the foundation for the suction bucket, when subjected to these forces. The outcomes of this study offer valuable information for the engineering of OWTs in regions prone to seismic activity. © The Author(s), under exclusive licence to Indian Geotechnical Society 2025.Item Performance Assessment of Geosynthetic Reinforced Quay Walls under Concurrent Tsunami and Earthquake Aftershocks(American Society of Civil Engineers (ASCE), 2025) Sajan, M.K.; Sah, B.; Chaudhary, B.; Akarsh, P.K.Coastal structures are built against the dynamic loadings from waves, tides, and storms. However, natural disasters such as earthquakes and tsunamis can impart additional loadings on these structures that might exceed their design specifications. In the past, several earthquakes and tsunamis had resulted in severe damages even on coastal structures engineered to withstand tsunamis. It is reasonable to suggest that the tsunami waves succeeding the earthquake had impacted the coastal structures along with an aftershock, imparting the most critical loading conditions. However, limited studies are available, evaluating the performance of coastal structures when subjected to the combined loading conditions. Among various coastal structures, quay walls stand out due to their distinctive loading patterns, concurrently sustaining vertical live loads, active pressure from retained backfill, and dynamic wave forces from the sea. Therefore, the present study paper puts forth a comprehensive analysis of geosynthetic reinforced quays under the influence of a tsunami withdrawal and an earthquake aftershock. Since the magnitudes of seaward-directed loads during tsunami drawdown are unknown and difficult to assess practically, this study assumes a worst-case loading condition to represent these effects. The analytical approach adopted employs the horizontal slice method, encompassing the influence of outboard seawater, backfill submergence, tsunami impact, and pseudo-static earthquake loads. Results indicate that combined loading conditions substantially increase reinforcement forces, reducing the internal stability of quay walls. Critical parameters influencing stability include the shear strength of backfill soil, quay wall inclination, and surcharge loads. © 2025 American Society of Civil Engineers.