Faculty Publications

Now showing 1 - 3 of 3

Refining of edible oils: A critical appraisal of current and potential technologies
(Blackwell Publishing Ltd customerservices@oxonblackwellpublishing.com, 2015) Chandrasekar, C.; Charanyaa, S.; Belur, P.D.; Iyyaswami, I.
Summary: The major sources of dietary lipids are edible oils, which include both vegetable and fish oils. Crude oil extracted from vegetable and fish sources contain mono-, di-, triacylglycerols along with impurities, which necessitates refining. The main objective of refining is to remove the contaminants that adversely affect the quality of oil, thereby reducing the shelf life and consumer acceptance. However, this refining process needs to be tailored as the composition of crude oil is highly variable, depending upon the plant/fish species, geographical location of the source and method of oil extraction. Recently, extensive efforts have been made to develop refining technology, using either conventional physical/chemical processes or several unconventional processes including biological and membrane processes. The first section of this review gives a brief description of general composition of some commonly used vegetable and fish oils, followed by the review of various refining methods and their effects on the oil constituents. Finally, an effort is made to understand the technological gaps in the existing methods and possible directions of research to overcome the said gaps. © 2014 Institute of Food Science and Technology.
A new strategy to refine crude Indian sardine oil
(Japan Oil Chemists Society yukagaku@jocs-office.or.jp, 2017) Charanyaa, S.; Belur, B.D.; Iyyaswami, R.
Current work aims to develop a refining process for removing phospholipids, free fatty acids (FFA), and metal ions without affecting n-3 polyunsaturated fatty acid (n-3 PUFA) esters present in the crude Indian sardine oil. Sardine oil was subjected to degumming with various acids (orthophosphoric acid, acetic acid, and lactic acid), conventional and membrane assisted deacidification using various solvents (methanol, ethanol, propanol and butanol) and bleaching with bleaching agents (GAC, activated earth and bentonite) and all the process parameters were further optimized. Degumming with 5%(w/w) ortho phosphoric acid, two stage solvent extraction with methanol at 1:1 (w/w) in each stage and bleaching with 3% (w/w) activated charcoal loading, at 80ºC for 10 minutes resulted in the reduction of phospholipid content to 5.66 ppm from 612.66 ppm, FFA to 0.56% from 5.64% with the complete removal of iron and mercury. Under these conditions, the obtained bleached oil showed an enhancement of n-3 PUFA from 16.39% (11.19 Eicosapentaenoic acid (EPA) + 5.20 Docosahexaenoic acid (DHA)) to 17.91% (11.81 EPA + 6.1 DHA). Replacing conventional solvent extraction with membrane deacidification using microporous, hydrophobic polytetrafluoroethylene membrane (PTFE), resulted in a lesser solvent residue (0.25% (w/w)) in the deacidified oil. In view of lack of reports on refining of n-3 PUFA rich marine oils without concomitant loss of n-3 PUFA, this report is significant. © 2017 by Japan Oil Chemists’ Society.
Effect of intrinsic and extrinsic factors on the storage stability of sardine oil
(Enviro Research Publishers publisher@enviropublishers.com, 2019) Charanyaa, S.; Belur, P.D.; Iyyaswami, I.
Oil extracted from pelagic fishes, rich in n-3 polyunsaturated fatty acids (PUFA) like Eicosapentaenoic acid and Docosahexaenoic acid, have numerous health benefits. The oil also contains impurities like di- and mono glycerides, free fatty acids, phospholipids, unsaponifiable matter, metal ions and volatile compounds. Most of these impurities are removed by refining process without affecting valuable n-3 PUFA. However, due to the presence of residual impurities, environmental factors and higher degree of unsaturation, the oil exhibit hydrolytic and oxidative instability during storage. This study was aimed to identify the most detrimental factors causing hydrolytic and oxidative instability and deterioration of n-3 PUFA content in sardine oil during five-week storage. The effect of various extrinsic and intrinsic factors on the storage stability was investigated. The hydrolytic and oxidative instability was estimated by free fatty acid (FFA) content and totox value (TV) respectively. Moisture, sunlight, ferric ions and FFA were found to be most detrimental to oil quality and n-3 PUFA content. Although, addition of phosphotidylcholine and phospholipase-A showed high degree of hydrolytic and oxidative instability, n-3 PUFA destruction was minimal. Interestingly, even in the presence of ferric ions and FFA, phosphotidylcholine and phospholipase-A exhibited n-3 PUFA protection. The exact mechanism by which phosphotidylcholine and phospholipase-A offered protection to n-3 PUFA needs further investigation. From this study, it can be concluded that removing ferric ions, moisture and FFA from crude oil during refining is essential. Further, the refined oil must be stored under dark conditions in airtight containers to retard deterioration of oil quality. © 2019 The Author(s). Published by Enviro Research Publishers.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results