Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item An experimental investigation of epoxy-based hybrid composites with hexagonal boron nitride and short sisal fiber as reinforcement for high performance microelectronic applications(John Wiley and Sons Inc, 2022) Agrawal, A.; Chandraker, S.In the present article, an investigation is presented on epoxy-based composites where the discontinuous phases are microsized boron nitride and sisal fiber (SF). Both the reinforcing materials are surface modified before incorporating them into the epoxy matrix. Hexagonal boron nitride (hBN) surface is treated by silane-coupling agent, whereas the aqueous NaOH solution is used to modify the surface of SF. The effect of fillers on the physical, mechanical, thermal, and dielectric properties of hybrid composites is studied through experimentation. The result shows that the inclusion of hBN increases the thermal conductivity of epoxy appreciably and dielectric constant marginally, while the inclusion of SF reduces the thermal conductivity marginally and dielectric constant appreciably. The maximum thermal conductivity of 1.88 W/m-K is obtained for the combination of 30 wt% hBN and 3 wt% SF. For the same combination, the dielectric constant is 4.57 at 1 GHz, which is almost similar to neat epoxy. Also, other properties like compressive strength, hardness, glass-transition temperature, and coefficient of thermal expansion improve when combinations of ceramic filler and natural fiber were incorporated in the epoxy matrix. Due to outstanding comprehensive properties, epoxy/hBN/SF composites found potential application in wide microelectronic applications. © 2021 Society of Plastics Engineers.Item Effect of metalloid element on the microstructural and mechanical properties of AlCoCrCuFeNi high-entropy alloys(Taylor and Francis Ltd., 2024) Chandrakar, R.; Chandraker, S.; Kumar, A.; Jaiswal, A.The impact of the metalloid element silicon (Si) addition on the microstructural and mechanical properties of the AlCoCuCrFeNiSix high-entropy alloy system is examined in this paper. The alloys were synthesized using a vacuum arc melting route. X-ray diffraction was used to analyse the current high-entropy alloys’ phase formation to comprehend the alloying process’s behaviour. It is evident from the peak pattern of the X-ray diffraction that the inclusion of Si promotes the growth of body-centred cubic structures. The microhardness and wear resistance were increased by increasing the Si content from 0 to 0.9. Si presence enhances the hardness of the alloys and strengthens the grain boundary. Improved hardness and wear resistance results from the enhanced body-centred cubic-phase formation, which poses a barrier to the dislocation movement and prevents further deformation. Furthermore, the inclusion of Si improved corrosion resistance in potentiodynamic polarization measurements. Excellent compressive strength is possessed by all of the high-entropy alloys with Si addition. © 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.Item Investigation of phase transformation and mechanical properties of silicon addition on AlCrFeMnNi high entropy alloys(Institute of Physics, 2024) Chandrakar, R.; Chandraker, S.; Kumar, A.; Jaiswal, A.This paper examines the impact of silicon in the AlCrFeMnNi high-entropy alloy system, focusing on both its microstructural and mechanical properties. Alloys with varying silicon content (x = 0, 0.3, 0.6, 0.9 atomic ratio) were synthesized using vacuum arc melting. The phase formation of these high-entropy alloys was analyzed using x-ray diffraction to comprehend the alloying process behaviour. The findings revealed that the solidification of the AlCrFeMnNi alloy occurred in dendritically, with dendrite cores containing Cr, Fe, and Ni, while interdendritic regions were enriched in Al and Ni after adding Silicon. Increasing the silicon content from 0 to 0.9 led to significant improvements in microhardness and wear resistance. This improvement is attributed to the reinforcement of grain boundaries provided by silicon. The formation of an Al and Ni rich B2 phase is crucial in resisting dislocation motion and preventing further deformation. Additionally, the addition of silicon led to improved corrosion resistance, as demonstrated by potentiodynamic polarization measurements. However, a trade-off was observed between compressive strength and ductility: compressive strength increased with higher silicon concentrations, but at the expense of ductility. © 2024 The Author(s). Published by IOP Publishing Ltd.