Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Microstructural and mechanical properties of AlCoCrCuFeNiSix (x = 0 and 0.9) high entropy alloys(Elsevier Ltd, 2021) Chandrakar, R.; Kumar, A.; Chandraker, S.; Rao, K.R.; Chopkar, M.In this work, the effect of addition of Si on the phase evolution and mechanical properties of AlCoCrCuFeNiSix alloy system has been studied. The High Entropy Alloys (x = 0 and 0.9) have been synthesised by powder metallurgy route which includes mechanical alloying (MA) and spark plasma sintering. X-ray diffraction technique was performed to understand the alloying behaviour and to investigate the phase formation of the high entropy alloys. The samples after spark plasma sintering comprised mainly of body centered cubic structured phase with a small extent of face centered cubic structured phase. With the addition of silicon, the XRD peak intensity of body centered cubic appears strong compared to the face centered cubic structured phase. Moreover, no intermetallic is observed in AlCoCrCuFeNi high entropy alloy system. However, further accumulation of Silicon results in the evolution of sigma (?) phase. © 2020 Elsevier LtdItem Phase Evolution of Novel MoNbSiTiW Refractory High-Entropy Alloy Prepared by Mechanical Alloying(Springer, 2022) Prakash, O.; Chandrakar, R.; Chandraker, S.; Rao, K.R.; Kumar, R.; Kumar, A.; Dubey, V.Refractory high-entropy alloys (RHEAs) are new types of material that have been developed for high-temperature applications. RHEAs should have enhanced high-temperature strength while maintaining a sufficient level of room-temperature toughness. The phase evolution of novel MoNbSiTiW RHEAs was investigated after mechanical alloying (MA) for 35 h. X-ray diffraction (XRD) was used to analyze the phase evolution, and analysis of particle morphologies was done using a scanning electron microscope (SEM) equipped with energy dispersive spectroscopy (EDS). XRD results indicate that NbMoSiTiW RHEAs with up to 10 h of mechanical alloying have a stable solid solution phase with body centered cubic (BCC) structure. Further milling of NbMoSiTiW RHEAs promotes the evolution of intermetallic compounds until 35 h of mechanical alloying. The Williamson-Hall process was incorporated for crystalline size and lattice strain measurement and the results show that, after 35 h of mechanical alloying, the crystalline size decreased from 298 nm to 25 nm, and an enhancement in lattice strain was observed from 0.1% to 0.65%. © 2022, The Minerals, Metals & Materials Society.Item Laser cladding technology for high entropy alloys: effect and applications(Institute of Physics, 2024) Prakash, O.; Chandrakar, R.; Martin, L.; Verma, J.; Kumar, A.; Jaiswal, A.A multi-component category of an alloy containing very specific properties revolutionized the area of material science and the present engineering era. Laser cladding, a technique for surface coating, enhances surface quality and modifies properties using advanced coating technologies. In current trends, Laser cladding is mainly used in equipment and machine parts for enhancing surface properties, repairing damaged parts and surface coating caused by its advantages such as small heat-affected zone, low substrate damage, low dilution rate and exceptional metallurgical material bonding among coating and used substrate. Laser cladding improves substrates’ mechanical and various functional-specific properties, ensuring a high-quality balance between mechanical and surface attributes. The research society was able to investigate laser-cladding HEAs coatings because of the superior attributes of HEAs compared to ordinary alloys. This paper reviews current developments in laser-cladding HEAs coatings and the application of laser-cladding technology to HEAs materials. The laser cladding high-entropy alloy coatings have potential applications in corrosion, wear, and oxidation resistance, as well as their respective substrates. Cladded coatings composed of HEAs materials are measured to have shown potential applications in recent technology, opening exciting possibilities for the future. The study also discusses current trends and future prospects. © 2024 The Author(s). Published by IOP Publishing Ltd.Item Investigation of phase transformation and mechanical properties of silicon addition on AlCrFeMnNi high entropy alloys(Institute of Physics, 2024) Chandrakar, R.; Chandraker, S.; Kumar, A.; Jaiswal, A.This paper examines the impact of silicon in the AlCrFeMnNi high-entropy alloy system, focusing on both its microstructural and mechanical properties. Alloys with varying silicon content (x = 0, 0.3, 0.6, 0.9 atomic ratio) were synthesized using vacuum arc melting. The phase formation of these high-entropy alloys was analyzed using x-ray diffraction to comprehend the alloying process behaviour. The findings revealed that the solidification of the AlCrFeMnNi alloy occurred in dendritically, with dendrite cores containing Cr, Fe, and Ni, while interdendritic regions were enriched in Al and Ni after adding Silicon. Increasing the silicon content from 0 to 0.9 led to significant improvements in microhardness and wear resistance. This improvement is attributed to the reinforcement of grain boundaries provided by silicon. The formation of an Al and Ni rich B2 phase is crucial in resisting dislocation motion and preventing further deformation. Additionally, the addition of silicon led to improved corrosion resistance, as demonstrated by potentiodynamic polarization measurements. However, a trade-off was observed between compressive strength and ductility: compressive strength increased with higher silicon concentrations, but at the expense of ductility. © 2024 The Author(s). Published by IOP Publishing Ltd.