Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Polyoxomolybdate-Polypyrrole-Graphene Oxide Nanohybrid Electrode for High-Power Symmetric Supercapacitors(American Chemical Society, 2021) Maity, S.; Je, M.; Biradar, B.R.; Chandewar, P.R.; Shee, D.; Das, P.P.; Mal, S.Supercapacitors have emerged as one of the most promising candidates for high-performance, safe, clean, and economical routes to store and release of nonfossil energy. Designing hybrid materials by integrating double-layer and pseudocapacitive materials is crucial to achieving high-power and high-energy storage devices simultaneously. Herein, we synthesized a polyoxomolybdate-polypyrrole-graphene oxide nanohybrid via a one-pot reaction. The inclusion of polypyrrole enables a uniform distribution of the polyoxomolybdate clusters; it also confines the restacking of graphene oxide nanosheets. The structural and morphological analysis to unveil the nanohybrid architecture implies excellent interfacial contact, enabling fast redox reaction of polyanions, and a quick transfer of charge to the interfaces. Electrochemical characteristics tested under a two-electrode system exhibit the highest capacitance of 354 F g-1 with significantly high specific energy and power of 49.16 Wh kg-1 and 999.86 W kg-1, respectively. In addition, the cell possesses a high-rate capability and long cycle life by maintaining 96% of its capacitance over 5000 sweeping cycles. The highest specific power of ?10 »000 W kg-1 was computed with Coulombic efficiency of 92.30% at 5 A g-1 current density. Electrochemical impedance spectroscopy additionally reveals enhanced redox charge transfer due to double hybridization. Furthermore, it also demonstrates the impedance and capacitive behavior of supercapacitor cells over a definite frequency regime. ©Item Waste dry cell derived photo-reduced graphene oxide and polyoxometalate composite for solid-state supercapacitor applications(Royal Society of Chemistry, 2023) Maity, S.; Biradar, B.R.; Srivastava, S.; Chandewar, P.R.; Shee, D.; Das, P.; Mal, S.S.In the modern era, realizing highly efficient supercapacitors (SCs) derived through green routes is paramount to reducing environmental impact. This study demonstrates ways to recycle and reuse used waste dry cell anodes to synthesize nanohybrid electrodes for SCs. Instead of contributing to landfill and the emission of toxic gas to the environment, dry cells are collected and converted into a resource for improved SC cells. The high performance of the electrode was achieved by exploiting battery-type polyoxometalate (POM) clusters infused on a reduced graphene oxide (rGO) surface. Polyoxometalate (K5[α-SiMo2VW9O40]) assisted in the precise bottom-up reduction of graphene oxide (GO) under UV irradiation at room temperature to produce vanadosilicate embedded photo-reduced graphene oxide (prGO-Mo2VW9O40). Additionally, a chemical reduction route for GO (crGO) was trialed to relate to the prGO, followed by the integration of a faradaic monolayer (crGO-Mo2VW9O40). Both composite frameworks exhibit unique hierarchical heterostructures that offer synergic effects between the dual components. As a result, the hybrid material's ion transport kinetics and electrical conductivity enhance the critical electrochemical process at the electrode's interface. The simple co-participation method delivers a remarkable specific capacity (capacitance) of 405 mA h g−1 (1622 F g−1) and 117 mA h g−1 (470 F g−1) for prGO-Mo2VW9O40 and crGO-Mo2VW9O40 nanocomposites alongside high capacitance retentions of 94.5% and 82%, respectively, at a current density of 0.3 A g−1. Furthermore, the asymmetric electrochromic supercapacitor crGO//crGO-Mo2VW9O40 was designed, manifesting a broad operating potential (1.2 V). Finally, the asymmetric electrode material resulted in an enhanced specific capacity, energy, and power of 276.8 C g−1, 46.16 W h kg−1, and 1195 W kg−1, respectively, at a current density of 0.5 A g−1. The electrode materials were tested in the operating of a DC motor. © 2023 The Royal Society of Chemistry.Item Pseudocapacitive effects of polyoxometalate implanted on graphene oxide matrix with polypyrrole for symmetric Supercapacitor applications(Elsevier B.V., 2024) Biradar, B.R.; Thathron, N.; Das, P.P.; Mal, S.S.Modern technological requirements emphasize designing and manufacturing electrochemical energy storage devices with high energy and power densities and longer cycle life. Supercapacitors with hybrid electrode materials have gained considerable attention as one of these systems due to their potential usage in futuristic applications such as electric vehicles and smart electric grids, among others. In this work, we synthesize potassium 9-tungsto-2-molybdo-1-vanadosilicate K5[α-SiMo2VW9O40]⋅10H2O and graphene oxide (GO) complex treating the latter as the supporting matrix for the former. We prepare the SiMo2VW9-polypyrrole (PPy) complex and then combine that with the GO matrix. The resulting nanohybrids GO-SiMo2VW9 and GO-PPy/SiMo2VW9 are found to have enhanced electrochemical properties when used in symmetric cells. Combining GO and pseudocapacitive materials can augment SC performance owing to their excellent redox properties. GO-SiMo2VW9 and GO-PPy/SiMo2VW9 showed 55.8 % and 85.5 % capacitive behavior at a scan rate of 10 mV/s, suggesting their use as high-performance pseudocapacitive materials as hybrid electrodes. GO-PPy/SiMo2VW9 electrode material shows a specific capacitance of 351.6 F/g with energy and power densities of 48.83 Wh/kg and 999.93 W/kg, respectively, at 0.5 A/g current density. Both the electrode materials yield capacitance retention of 60 % (GO-SiMo2VW9) and 80 % (GO-PPy/SiMo2VW9) after 5000 cycles at an 8A/g current density with almost 100 % coulombic efficiency, implying the stability of the electrode material. © 2024 Elsevier B.V.Item Carbon Nanotube-Supported Vanadium Substituted Phospho-Molybdate Nanohybrid for Supercapacitor Applications(John Wiley and Sons Inc, 2025) Biradar, B.R.; Swetha, M.T.; Thathron, N.; Puniyanikkottil, M.A.; Hanchate, A.; Das, P.P.; Mal, S.S.Owing to the depletion of conventional energy sources, our civilization is slowly transitioning to renewables. Therefore, designing effective energy storage systems is one of the most pressing technical demands. The quest for improved energy and power densities in energy storage devices, particularly those with long cycle life, has pushed the investigation of novel materials intended to build effective supercapacitors. In this work, nanohybrid materials are synthesized using a hydrothermal technique by mixing carbon nanotubes and a polyoxometalate cluster, H4[PVMo11O40].xH2O. Henceforth, this complex is acronymed as CNT-PVMo11. Further, electrochemical analysis of CNT-PVMo11 nanohybrid is carried out to examine various characteristics of the supercapacitor cell made with this nanohybrid. The cyclic voltammetry confirms the diffusive-dominant charge-storage process, quantifying a 72.83% diffusion mechanism at a scan rate of 1 mV s?1. The galvanostatic charge–discharge analysis of CNT-PVMo11 nanohybrid material showed a specific capacitance of 229.35 F g?1 with energy and power densities of 31.85 Wh kg?1 and 2000 W kg?1, respectively, at 1 A g?1 current density. The electrode material also shows 90% capacitance retention even after 6000 cycles at 8 A g?1 current density, indicating the material's remarkable stability. The high specific capacitance, excellent energy density, and impressive cycling stability of the hybrid material make it a promising candidate for next-generation supercapacitor electrodes. © 2025 Wiley-VCH GmbH.