Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Metastable microstructures at the interface between AISI 321 steel and molten aluminum during hot-dip aluminizing(Elsevier B.V., 2018) Huilgol, P.; Udupa, K.R.; Bhat, K.U.The microstructure at the interface between AISI 321 stainless steel and molten aluminum was investigated which occurs during the process of hot-dip aluminizing. Microstructural characterization was carried out by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The study revealed the formation of metastable FeAlm and multiple twinned Al13Fe4 phases at the interface between steel and aluminum. Multiple twinned Al13Fe4 phase exhibits pseudo tenfold electron diffraction pattern. Another metastable phase Al3(NiFe) with an orthorhombic structure was formed as one of the eutectic phase mixture in the solidified aluminum topcoat. The Al3(NiFe) phase in the eutectic shares crystallographic orientation relationship with the Al matrix. Metastable intermetallic phases are being reported for the first time during hot-dip aluminizing. © 2018 Elsevier B.V.Item Microstructural investigations on the hot-dip aluminized AISI 321 stainless steel after diffusion treatment(Elsevier B.V., 2019) Huilgol, P.; Udupa, K.R.; Bhat, K.U.The microstructure of the hot-dip aluminized AISI 321 stainless steel was studied after diffusion treatment at 900 °C for 3 h. The microstructural characterization was carried out by scanning electron microscopy, transmission electron microscopy, and X-ray diffractometry. The microstructure of the as aluminized steel consisted of two regions, viz.; aluminum topcoat and aluminide layer. During the diffusion treatment, the coating transformed into a layered structure consisting of four layers. The Fe2Al5 phase was formed in the outermost layer and the presence of Al13Fe4 quasicrystalline approximant phase was observed. The innermost layer adjacent to the base metal transformed to ferrite phase with NiAl precipitates. Next, to this layer, a disordered FeAl phase was observed. The lattice parameter of the disordered FeAl phase was found to be larger than that of the ordered B2 FeAl phase. The layer between outer Fe2Al5 phase and disordered FeAl phase consists of a mixture of three phases, namely Fe2Al5, disordered FeAl and a new phase with the simple cubic structure. The phase with simple cubic structure shares cube on cube crystallographic orientation relationship with the disordered FeAl phase. © 2019 Elsevier B.V.