Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 5 of 5
  • Item
    Facile solvothermal synthesis and high supercapacitor performance of NiCo2O4 nanorods
    (Elsevier Ltd, 2019) Sethi, M.; Bhat, D.K.
    NiCo2O4 nanorod arrays were synthesized employing a facile low-temperature solvothermal approach, followed by post-calcination treatment. The structural, morphological and elemental characterizations were done by diffraction, microscopic and spectroscopic techniques. The prepared sample was studied as an active electrode material for supercapacitor application in 2 M KOH aqueous electrolyte. The cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectral (EIS) studies were carried out to know the electrochemical activity of the prepared material. From the CV study, a high capacitance value of 440 F g?1 was obtained at a scan rate of 5 mV s?1 in a 3-electrode method. Apart from high capacitance value, the prepared electrode depicted 94% initial capacitance retention value after 2000 charge-discharge cycles at a current density of 8 A g?1. The fabricated symmetrical supercapacitor depicted a high energy density of 12.6 Wh kg?1 and a high power density of 4003 W kg?1. This was attributed to the better electrical conductivity of NiCo2O4 nanorods. © 2018 Elsevier B.V.
  • Item
    Eco-friendly synthesis of porous graphene and its utilization as high performance supercapacitor electrode material
    (Elsevier Ltd, 2019) Sethi, M.; Bantawal, H.; Shenoy, U.S.; Bhat, D.K.
    The successful application of porous graphene (PG) is hindered due to the lack of efficient and cost-effective method for its synthesis. Herein, we report a facile and eco-friendly method to produce PG through a low temperature solvothermal method. The structural and morphological characteristics of PG samples were investigated thoroughly. The as synthesized material is found to be a few layers thick (?4–6 layers) with a surface area of 420 m2 g?1 and consisting of hierarchical pores on the surface of the sheets. A high specific capacitance of 666 F g?1 was obtained at a scan rate of 5 mV s?1, apart from longer cyclic stability with 87% retention of initial capacitance value after 10000 cycles for the PG 28 sample. The fabricated supercapacitor displayed an energy density of 26.3 Wh kg?1 and power density of 6120 W kg?1. Density functional theory calculations were also carried out to qualitatively support the enhanced capacitance by providing theoretical insight from electronic structure and density of states of PG. These results open a new avenue for greener synthesis of high-quality PG using environmentally friendly solvents, without the use of toxic chemicals, for excellent supercapacitor performance. © 2019 Elsevier B.V.
  • Item
    Porous graphene-NiCo2O4 nanorod hybrid composite as a high performance supercapacitor electrode material
    (Royal Society of Chemistry, 2020) Sethi, M.; Shenoy, U.S.; Bhat, D.K.
    The template free low temperature solvothermal synthesis of high capacitive porous graphene-NiCo2O4 nanorod composites has been carried out. Solvothermal synthesis followed by calcination in air led to the development of a highly porous hybrid nanocomposite, which acts as a buffering channel for fast ion diffusion and provides robust mechanical strength. Advantages of using porous graphene to enhance the capacitance of the material were studied theoretically using First principles calculations. High capacitance values of 1533 F g-1 at a scan rate of 5 mV s-1 and 1684 F g-1 at a current density of 1 A g-1 are obtained from cyclic voltammetry data and galvanostatic charge discharge data, respectively. The electrode material possesses good cyclic stability with the retention of 94% of its initial capacitance even after 10000 charge-discharge cycles at a current density of 8 A g-1 in 2 M KOH electrolyte. The fabricated supercapacitor exhibited a high energy density of 45.3 W h kg-1 and a high power density of 17843.5 W kg-1 due to the synergistic effect of the composite components. The enhanced electrochemical function of the composite makes it a potential candidate for supercapacitor application and future studies. This journal is © 2020 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique.
  • Item
    Hassle-free solvothermal synthesis of NiO nanoflakes for supercapacitor application
    (Elsevier B.V., 2021) Sethi, M.; Shenoy, U.S.; Bhat, D.K.
    A mixed solvent solvothermal approach was employed for the synthesis of NiO (NO) nanostructures under a low temperature route. The nanoflakes when studied for its electrochemical performance in a 3-electrode method in aqueous 2 M KOH revealed a high capacitance value of 305.0 F g?1 at a scan rate of 5 mV s?1 apart from good rate capability, cyclic stability and coulombic efficiency. The fabricated symmetrical supercapacitor device also showed good electrochemical performance of pseudocapacitive nature with a high power density of 8000.0 W kg?1. The extent of surface sites taking part in the electrochemical processes reveals the enhanced performance is due to the high surface area of NO with a mesoporous structure. The enhanced conductivity of the nanoflakes also provided an unhindered path way for the ionic transport. The promising results reveal that the synthetic technique employed could be extended to other oxides as well. © 2021 Elsevier B.V.
  • Item
    Probing of Bi doped GeTe thermoelectrics leads to revelation of resonant states
    (Elsevier Ltd, 2022) Shenoy, U.S.; D, G.K.; Bhat, D.K.
    Quest for lead free high performance mid temperature thermoelectric materials has led to extensive research on SnTe and GeTe based materials. Among various strategies implemented to improve the transport properties of GeTe, electronic structure engineering holds a prominent place. Herein, we reinvestigate the impact of substitutional doping of Bi in GeTe on its electronic structure in both rhombohedral and cubic phase. We uncover that Bi introduces resonance levels in GeTe acting as a first n-type resonant dopant in both rhombohedral and cubic phases. We also report for the first time that Bi resonance states undergo Rashba splitting in low temperature rhombohedral phase. Bi doping acts in a multifunctional way by tuning the carrier concentration, causing conduction band convergence and phonon scattering in addition to improving the band effective mass by distorting the density of states near the Fermi level to enhance the thermoelectric performance of the material. The convergence of L, Z and Σ valence bands in rhombohedral phase due to Bi doping leads to manifestation of Rashba effect in p-type material which was not reported till date. Thus, we propose that the chemical potential tuning can result in p-type as well as n-type Bi doped GeTe for thermoelectric application. © 2022 Elsevier B.V.