Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Hierarchical porous Batio3 nano-hexagons as a visible light photocatalyst(Science Publishing Corporation Inc ijet@sciencepubco.com, 2018) Bantawal, H.; Bhat, D.K.Hierarchical porous BaTiO3 nano-hexagons was synthesized via a simple hydrothermal route by using TiO2 and Ba(OH)2.8H2O as starting materials under alkaline environment and its photocatalytic activity was evaluated under visible light by taking methylene blue (MB) as a model pollutant. The prepared BaTiO3 was characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), energy dispersive X-rays analysis (EDX), high resolution transmission electron microscopy (HRTEM), Brunauer-Emmett-Teller (BET) analysis and diffused reflectance spectroscopy (DRS) techniques. It is noteworthy that the BaTiO3 nanohexagons exhibited significant photocatalytic activity towards the degradation of MB under visible light irradiation. This significant photocatalytic activity of BaTiO3 under visible light is mainly attributed to the special morphology and formation of Ti3+ defects. © 2018 Authors.Item Enhanced thermoelectric properties of vanadium doped SrTiO3: A resonant dopant approach(Elsevier Ltd, 2020) Shenoy, U.S.; Bhat, D.K.Development of eco-friendly thermoelectric (TE) materials to tackle global energy crisis has become the need of the day. The goal is to either improve the properties of the existing materials or to look for new materials with better TE properties which are also nontoxic, abundant and stable. SrTiO3, a perovskite material has been gaining interest recently due to its unique and tunable electronic and crystal structure. Herein, we systematically study the effect of site occupancy of vanadium doping in SrTiO3 on the electronic structure and TE properties. First principles calculations reveal that doping of V in Sr lattice site introduces resonance levels and thereby causes distortion in density of states near the Fermi level. Transport property calculations predict V doped SrTiO3 to be a potential TE material. The study is a first report on introduction of resonance states by V in Sr site in SrTiO3 and provides new insights into the doping strategy in improving the TE properties of SrTiO3. © 2020 Elsevier B.V.Item Vanadium-doped BaTiO3 as high performance thermoelectric material: role of electronic structure engineering(Elsevier Ltd, 2020) Shenoy, U.S.; Bhat, D.K.It is well known that thermoelectric (TE) materials are the most sought-after ones to mitigate energy crisis. Development of an efficient non-toxic, economic, abundant, and stable TE material is quite difficult due to its complicated traits. BaTiO3, a perovskite material shows a tremendous potential as a TE material due to its highly tunable electronic structure. Herein, for the first time we report use of dopant to improve the Seebeck coefficient of BaTiO3. We used first-principles density functional theory calculations to study the effect of vanadium doping in BaTiO3, and for the first time, we report that V acts as a resonant dopant in BaTiO3. The study on effect of site occupancy reveals that V in Ba site distorts the density of states below the conduction band by introducing resonance level at the Fermi level. The transport property calculations based on Boltzmann's relation predicts V-doped BaTiO3 to be a potential TE material. The results also provide new insights into development of BaTiO3 as a multifunctional material. © 2020 Elsevier LtdItem Electronic structure engineering of BaTiO3 cuboctahedrons by doping copper to enhance the photocatalytic activity for environmental remediation(Elsevier Ltd, 2023) Uma, P.I.; Shenoy, U.S.; Bhat, D.K.The advent of perovskites as an efficient photocatalyst has paved the way to newer possibilities in the degradation of contaminants such as dyes and toxic heavy metal ions. The alleged poor photocatalyst BaTiO3 was engineered to perform better by decreasing its bandgap to make it visible light active via doping. The high-risk factor in the reduction of the bandgap is the formation of recombination centers for the charge carriers which decreases the efficiency of the photocatalyst. Herein, we studied the electronic structure tuning of BaTiO3 by doping copper and developed a one pot synthesis method to obtain copper doped BaTiO3 that has a high surface area, lower recombination rate, and higher photocatalytic efficiency towards dye degradation and hexavalent chromium ion reduction. The 0.5 CuBT sample had a photocatalytic efficiency of 99.4 % for methyl violet decomposition within 120 min and 99.8 % for hexavalent chromium ion reduction by fructose in 20 min. © 2023 Elsevier B.V.Item Copper doping induced band structure and morphology transformation in CaTiO3 for textile dye photodegradation applications(Elsevier Ltd, 2024) Shenoy, U.S.; Uma, P.I.; Bhat, D.K.Semiconductor metal oxides with a wide bandgap like CaTiO3 can be exploited into an efficient visible light photocatalyst via cation doping. The type of dopant and the site of doping is known to greatly influence the photocatalytic activity of a material. Based on the intricacies of the density functional theory electronic structure study, we delve into the optimization of one-pot solvothermal synthesis to obtain Cu doped CaTiO3 nanocuboids. Doping of copper not only resulted in change in the electronic structure of the material but also led to change in the morphology. The uneven nanostep architecture resulted in increase in the surface area of the catalyst, which led to more active sites for the adsorption of the dyes and subsequent degradation. The reduced band gap and decreased recombination of charge carriers made the copper doped calcium titanate an efficient photocatalyst for degradation of both cationic (99.7% degradation of MV dye in 120 minutes) and anionic (99.8% degradation of RB in 45 minutes) dyes. © 2024 Elsevier B.V.Item Exceptional light harvesting in copper doped CaTiO3 nanocuboids with surface nanosteps for the photo remediation of toxic Cr(VI) ions and dyes(Elsevier B.V., 2024) Bhat, D.K.; Uma, P.I.; Shenoy, U.S.Addressing the rising concerns of water pollution caused by harmful inorganic and organic contaminants is very crucial and photocatalysts with exceptional light harvesting capability are a promising way to tackle these issues. This study investigates the transformation of CaTiO3 into a visible light-active photocatalyst via copper doping. Copper-doped CaTiO3 nanocuboids were synthesized via a one-step solvothermal approach, resulting in the formation of distinctive nanostep substructures on the surface. Morphological analysis revealed the successful incorporation of copper ions into the perovskite matrix, as evidenced by the transition from smooth to rough, uneven surface features. X-ray diffraction confirmed the incorporation of Cu2+ ions into the Ti4+ site, while visible range absorption indicated a reduction in the bandgap. Furthermore, doping decreased the rate of charge carrier recombination and increased their average lifetime, prolonging the duration of active species. This modification facilitating efficient absorption of visible light and increase in the charge separation, leads to enhanced photocatalytic activity. The doped catalyst exhibited exceptional performance in the remediation of hexavalent chromium ions (98.5 % Cr6+ ions reduction to Cr3+ ions in 20 min), methylene blue (99.4 % degradation within 120 min), and eosin yellow (99.8 % degradation within 80 min) pollutants. This research underscores the potential of doping as a viable strategy for tailoring photocatalytic properties and addressing water pollution challenges. © 2024 Elsevier B.V.