Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 6 of 6
  • Item
    LiClO4-doped plasticized chitosan as biodegradable polymer gel electrolyte for supercapacitors
    (2009) Muthu, M.S.; Bhat, D.K.
    Studies on redox supercapacitors using electronically conducting polymers are of great importance for hybrid power sources and pulse power applications. In this study, electrochemical properties of a chitosan-based biodegradable polymer gel electrolyte (PGE) and a p/p polypyrrole supercapacitor fabricated using this electrolyte have been investigated. The variation of conductivity and dielectric properties of the electrolyte film with temperature has also been measured. The PGE film chosen for the study exhibited a specific conductivity of 5.5 × 10-3 S cm~. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The fabricated supercapacitor showed a fairly good specific capacitance of 120 F g-1 and a time constant of 1 s. © 2009 Wiley Periodicals, Inc.
  • Item
    Electrical and magnetic properties of chitosan-magnetite nanocomposites
    (2010) Bhatt, A.S.; Bhat, D.K.; Santosh, M.S.
    Magnetite powders in nanometer size have been synthesized by the hydrothermal process. Various magnetic films of chitosan and the synthesized magnetite nanopowders containing different concentrations of the latter were prepared by ultrasonication route. The X-ray diffraction (XRD) studies and the transmission electron microscopy (TEM) images showed that the synthesized magnetite particles had 80 nm dimensions. The band gap of the composites was evaluated using the UV-visible Spectroscopy. The influence of magnetite content on the magnetic properties of the composite showed a decrease in the saturation magnetization with the decrease in the magnetic content. The effect of magnetite content on the dielectric properties of the polymer film at different frequencies from 0.01 to 105 Hz was studied using an electrochemical impedance spectroscopy. The possible mechanism for the observed electrical properties of the composite films was discussed. © 2010 Elsevier B.V. All rights reserved.
  • Item
    Nano ZnO-activated carbon composite electrodes for supercapacitors
    (2010) Muthu, M.S.; Bhat, D.K.; Aggarwal, A.; Prahladh Iyer, S.; Sravani, G.
    A symmetrical (p/p) supercapacitor has been fabricated by making use of nanostructured zinc oxide (ZnO)-activated carbon (AC) composite electrodes for the first time. The composites have been characterized by field emission scanning electron microscopy (FESEM) and X-ray diffraction analysis (XRD). Electrochemical properties of the prepared nanocomposite electrodes and the supercapacitor have been studied using cyclic voltammetry (CV) and AC impedance spectroscopy in 0.1 M Na2SO4 as electrolyte. The ZnO-AC nanocomposite electrode showed a specific capacitance of 160 F/g for 1:1 composition. The specific capacitance of the electrodes decreased with increase in zinc oxide content. Galvanostatic charge-discharge measurements have been done at various current densities, namely 2, 4, 6 and 7 mA/cm2. It has been found that the cells have excellent electrochemical reversibility and capacitive characteristics in 0.1 M Na2SO4 electrolyte. It has also been observed that the specific capacitance is constant up to 500 cycles at all current densities. © 2010 Elsevier B.V. All rights reserved.
  • Item
    Electrochemical properties of chitosan-Co3O4 nanocomposite films
    (Elsevier B.V., 2011) Bhatt, A.S.; Bhat, D.K.; Santosh, M.S.
    Chitosan-Co3O4 composite films have been prepared by solution casting method. The obtained films have been characterised by XRD and FESEM. The electrical properties of the films are examined by impedance spectroscopy in the temperature range 303-343 K. The impedance plot of the films pronounces the role of temperature in charge-transfer resistance of the composite. Frequency as well as temperature dependencies of dielectric constant and dielectric loss exhibit the general trend followed by carrier dominated dielectrics. Electric modulus parameters give an insight on the ionic conductivity and relaxation phenomena of the composite films. The dielectric parameters along with modulus data have been exploited to discuss the conduction mechanism in the material. The minimum activation energy of 3.9 kJ mol -1 and maximum room temperature conductivity of 1.94 × 10 -2 S cm-1 were found for composite film with 8% Co 3O4 content. © 2011 Elsevier B.V. All rights reserved.
  • Item
    Novel eco-friendly synthesis of graphene directly from graphite using 2,2,6,6-tetramethylpiperidine 1-oxyl and study of its electrochemical properties
    (Elsevier B.V., 2015) Subramanya, B.; Bhat, D.K.
    Herein we report a simple, low cost, highly efficient and environment friendly one-pot method for the high throughput synthesis of graphene directly from graphite using 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) and H2O2 under microwave irradiation. The formation mechanism of graphene nanosheets (GNS) as investigated by Raman spectroscopy and electron microscopy techniques reveal surface defect generation, intercalation and exfoliation as the main steps. The rapid and local Joule heating of graphite by microwave radiation results in simultaneous deoxygenation and exfoliation forming GNS. The as-synthesized GNS are a few layer thick with a high surface area of 937.6 m2 g-1 and a high C/O ratio of 9.2. These results open the perspective of replacing toxic oxidizing and reducing agents by environment friendly chemicals of similar efficacy, thus facilitating the large-scale production of GNS by a greener method. Furthermore, GNS exhibits good electrochemical performance with a large specific capacitance (197 F g-1), excellent rate capability and a long cycle life (1000 cycles) in neat 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF4) electrolyte. It also has a high energy density of 76.03 W h kg-1 while simultaneously possessing a high power density of 1.12 kW kg-1. © 2014 Elsevier B.V.
  • Item
    Effect of acid dopants in biodegradable gel polymer electrolyte and the performance in an electrochemical double layer capacitor
    (Institute of Physics Publishing custserv@iop.org, 2015) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.
    Proton-conducting biodegradable gellan gum gel polymer electrolytes (GPEs) have been prepared using three different dopants, namely ortho-phosphoric (o-H3PO4), sulfuric (H2SO4) and hydrochloric acids (HCl). The GPEs were cross-linked using borax. The polymeric gels were characterized by spectroscopic, thermal, ionic conductivities and dielectric measurements. Proton conductivity was in the range of 5.1 × 10-3 to 3.7 × 10-4 s cm-1 and activation energies were between 0.14 meV and 0.19 meV, at different temperatures. Among the doped acids, the H3PO4 doped GPE exhibited thermal stability at varying temperature. Electrochemical double layer capacitors (EDLCs) were fabricated using activated carbon as electrode material and GPEs. The EDLCs were tested using cyclic voltammetry, ac impedance spectroscopic and galvanostatic charge-discharge techniques. The maximum specific capacitance value was 146 F g-1 at a scan rate of 2 mV s-1. Quite stable values were obtained at a constant current density up to 1000 cycles. © 2015 The Royal Swedish Academy of Sciences.