Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 5 of 5
  • Item
    Activated carbon-polyethylenedioxythiophene composite electrodes for symmetrical supercapacitors
    (2008) Muthu, M.S.; Bhat, D.K.
    A symmetrical (p/p) supercapacitor has been fabricated by making use of activated carbon (AC)-poly-ethylenedioxythiophene (PEDPT)-composite electrodes for the first time. The composite electrodes have been prepared via electrochemical deposition of ?-napthalenesulphonate doped PEDPT onto AC electrodes. The characteristics of the electrodes and the fabricated supercapacitor have been investigated using cyclic voltammetry (CV) and AC impedance spectroscopy. The electrodes show a maximum specific capacitance of 158 Fg-1 at a scan rate of 10 mV s_1. This indicates that the in situ electro-polymerization of ethylenedioxythiophene (EDPT) onto AC could improve the performance of carbon electrodes for use in supercapacitors. © 2007 Wiley Periodicals, Inc.
  • Item
    Polyvinyl alcohol-polystyrene sulphonic acid blend electrolyte for supercapacitor application
    (2009) Muthu, M.S.; Bhat, D.K.
    A new polymer blend electrolyte based on poly vinyl alcohol and poly styrene sulphonic acid has been studied as an electrolyte for supercapcitors. A carbon-carbon supercapacitor has been fabricated using this electrolyte and its electrochemical characteristics and performance have been studied. The conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. The real and imaginary parts of the electrical modulus of samples show a long tail feature, which can be attributed to high capacitance of the material. The super capacitor showed a fairly good specific capacitance of 40 F g- 1 and a time constant of 5 s. © 2008 Elsevier B.V. All rights reserved.
  • Item
    LiClO4-doped plasticized chitosan as biodegradable polymer gel electrolyte for supercapacitors
    (2009) Muthu, M.S.; Bhat, D.K.
    Studies on redox supercapacitors using electronically conducting polymers are of great importance for hybrid power sources and pulse power applications. In this study, electrochemical properties of a chitosan-based biodegradable polymer gel electrolyte (PGE) and a p/p polypyrrole supercapacitor fabricated using this electrolyte have been investigated. The variation of conductivity and dielectric properties of the electrolyte film with temperature has also been measured. The PGE film chosen for the study exhibited a specific conductivity of 5.5 × 10-3 S cm~. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The fabricated supercapacitor showed a fairly good specific capacitance of 120 F g-1 and a time constant of 1 s. © 2009 Wiley Periodicals, Inc.
  • Item
    Nano ZnO-activated carbon composite electrodes for supercapacitors
    (2010) Muthu, M.S.; Bhat, D.K.; Aggarwal, A.; Prahladh Iyer, S.; Sravani, G.
    A symmetrical (p/p) supercapacitor has been fabricated by making use of nanostructured zinc oxide (ZnO)-activated carbon (AC) composite electrodes for the first time. The composites have been characterized by field emission scanning electron microscopy (FESEM) and X-ray diffraction analysis (XRD). Electrochemical properties of the prepared nanocomposite electrodes and the supercapacitor have been studied using cyclic voltammetry (CV) and AC impedance spectroscopy in 0.1 M Na2SO4 as electrolyte. The ZnO-AC nanocomposite electrode showed a specific capacitance of 160 F/g for 1:1 composition. The specific capacitance of the electrodes decreased with increase in zinc oxide content. Galvanostatic charge-discharge measurements have been done at various current densities, namely 2, 4, 6 and 7 mA/cm2. It has been found that the cells have excellent electrochemical reversibility and capacitive characteristics in 0.1 M Na2SO4 electrolyte. It has also been observed that the specific capacitance is constant up to 500 cycles at all current densities. © 2010 Elsevier B.V. All rights reserved.
  • Item
    Effect of acid dopants in biodegradable gel polymer electrolyte and the performance in an electrochemical double layer capacitor
    (Institute of Physics Publishing custserv@iop.org, 2015) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.
    Proton-conducting biodegradable gellan gum gel polymer electrolytes (GPEs) have been prepared using three different dopants, namely ortho-phosphoric (o-H3PO4), sulfuric (H2SO4) and hydrochloric acids (HCl). The GPEs were cross-linked using borax. The polymeric gels were characterized by spectroscopic, thermal, ionic conductivities and dielectric measurements. Proton conductivity was in the range of 5.1 × 10-3 to 3.7 × 10-4 s cm-1 and activation energies were between 0.14 meV and 0.19 meV, at different temperatures. Among the doped acids, the H3PO4 doped GPE exhibited thermal stability at varying temperature. Electrochemical double layer capacitors (EDLCs) were fabricated using activated carbon as electrode material and GPEs. The EDLCs were tested using cyclic voltammetry, ac impedance spectroscopic and galvanostatic charge-discharge techniques. The maximum specific capacitance value was 146 F g-1 at a scan rate of 2 mV s-1. Quite stable values were obtained at a constant current density up to 1000 cycles. © 2015 The Royal Swedish Academy of Sciences.