Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Ultrasonic velocities, densities, and viscosities of glycylglycine and CoCl2 in aqueous and aqueous ethanol systems at different temperatures(2010) Santosh, M.S.; Bhat, D.K.; Bhatt, A.S.Ultrasonic velocity (u), density (?), and viscosity (?) have been measured for glycylglycine and CoCl2 in aqueous and aqueous ethanol systems at T = (288.15 to 318.15) K. Using the experimental values, the adiabatic compressibility (?s), molar hydration number (nH), apparent molar compressibility (KS?), apparent molar volume (V?), limiting apparent molar compressibility (KS ?{symbol}0), limiting apparent molar volume (V?{symbol}0), their constants (SK, SV), viscosity coefficients of A and B parameters of Jones-Dole equation, relative viscosity (?r), and excess Gibbs free energy of activation (? G* E) were calculated and the results of all these parameters have been discussed in terms of solute-solvent and solute-solute interactions. © 2010 Elsevier Ltd. All rights reserved.Item Electrochemical properties of chitosan-Co3O4 nanocomposite films(Elsevier B.V., 2011) Bhatt, A.S.; Bhat, D.K.; Santosh, M.S.Chitosan-Co3O4 composite films have been prepared by solution casting method. The obtained films have been characterised by XRD and FESEM. The electrical properties of the films are examined by impedance spectroscopy in the temperature range 303-343 K. The impedance plot of the films pronounces the role of temperature in charge-transfer resistance of the composite. Frequency as well as temperature dependencies of dielectric constant and dielectric loss exhibit the general trend followed by carrier dominated dielectrics. Electric modulus parameters give an insight on the ionic conductivity and relaxation phenomena of the composite films. The dielectric parameters along with modulus data have been exploited to discuss the conduction mechanism in the material. The minimum activation energy of 3.9 kJ mol -1 and maximum room temperature conductivity of 1.94 × 10 -2 S cm-1 were found for composite film with 8% Co 3O4 content. © 2011 Elsevier B.V. All rights reserved.Item Chitosan/NiO nanocomposites: A potential new dielectric material(2011) Bhatt, A.S.; Bhat, D.K.; Santosh, M.S.; Tai, C.-W.The study of electrochemical behavior of organic-inorganic nanocomposite materials remains a major challenge for application in energy storage devices. Here, new composite materials of chitosan and NiO nanoparticles have been fabricated. The NiO nanoparticles are well characterized by infrared spectroscopy, X-ray diffraction and transmission electron microscopy. The electrical properties of the films are studied by impedance spectroscopy at different temperatures; and thereby permittivity, electric modulus and conductivity data are obtained. By studying the variations in permittivity and electric modulus spectra with respect to applied frequency signal and temperature, the ionic conductivity of the material is investigated. The Correlated Barrier Hopping model is employed to understand the conduction mechanism. An admirable conductivity of 1.4 × 10-2 S cm -1 is obtained for a nanocomposite with 4 wt% NiO content. The activation energies of the composite films decrease with increase in NiO content, from 16.5 to 4.8 kJ mol-1. © 2011 The Royal Society of Chemistry.Item LiClO4-doped plasticized chitosan and poly(ethylene glycol) blend as biodegradable polymer electrolyte for supercapacitors(Institute for Ionics, 2013) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.Biodegradable polymer electrolyte comprising the blend of chitosan (CS) and poly(ethylene glycol) (PEG) plasticized with ethylene carbonate and propylene carbonate, as host polymer, and lithium perchlorate (LiClO4), as a dopant, was prepared by solution casting technique. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. The variation of conductivity and dielectric properties has been investigated as a function of polymer blend ratio, plasticizer content and LiClO4 concentration at temperature range of 298-343 K. The DSC thermograms show two broad peaks for CS/PEG blend and increased with increase in the LiClO4 content. The maximum conductivity has been found to be 1. 1 × 10-4 S cm-1 at room temperature for 70:30 (CS/PEG) concentration. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The activation energy of all samples was calculated using the Arrhenius plot, and it has been found to be 0. 12 to 0. 38 eV. A carbon-carbon supercapacitor has been fabricated using this electrolyte, and its electrochemical characteristics and performance have been studied. The supercapacitor showed a fairly good specific capacitance of 47 F g-1. © 2012 Springer-Verlag.Item Tubular array, dielectric, conductivity and electrochemical properties of biodegradable gel polymer electrolyte(Elsevier Ltd, 2014) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.A supercapacitor based on a biodegradable gel polymer electrolyte (GPE) has been fabricated using guar gum (GG) as the polymer matrix, LiClO4 as the doping salt and glycerol as the plasticizer. The scanning electron microscopy (SEM) images of the gel polymer showed an unusual tubular array type surface morphology. FTIR, DSC and TGA results of the GPE indicated good interaction between the components used. Highest ionic conductivity and lowest activation energy values were 2.2 × 10-3 S cm-1 and 0.18 eV, respectively. Dielectric studies revealed ionic behavior and good capacitance with varying frequency of the GPE system. The fabricated supercapacitor showed a maximum specific capacitance value of 186 F g -1 using cyclic voltammetry. Variation of temperature from 273 K to 293 K did not significantly influence the capacitance values obtained from AC impedance studies. Galvanostatic charge-discharge study of supercapacitor indicated that the device has good stability, high energy density and power density. © 2013 Elsevier Ltd. All rights reserved.Item Effect of acid dopants in biodegradable gel polymer electrolyte and the performance in an electrochemical double layer capacitor(Institute of Physics Publishing custserv@iop.org, 2015) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.Proton-conducting biodegradable gellan gum gel polymer electrolytes (GPEs) have been prepared using three different dopants, namely ortho-phosphoric (o-H3PO4), sulfuric (H2SO4) and hydrochloric acids (HCl). The GPEs were cross-linked using borax. The polymeric gels were characterized by spectroscopic, thermal, ionic conductivities and dielectric measurements. Proton conductivity was in the range of 5.1 × 10-3 to 3.7 × 10-4 s cm-1 and activation energies were between 0.14 meV and 0.19 meV, at different temperatures. Among the doped acids, the H3PO4 doped GPE exhibited thermal stability at varying temperature. Electrochemical double layer capacitors (EDLCs) were fabricated using activated carbon as electrode material and GPEs. The EDLCs were tested using cyclic voltammetry, ac impedance spectroscopic and galvanostatic charge-discharge techniques. The maximum specific capacitance value was 146 F g-1 at a scan rate of 2 mV s-1. Quite stable values were obtained at a constant current density up to 1000 cycles. © 2015 The Royal Swedish Academy of Sciences.Item Preparation and characterization of phosphoric acid-doped hydroxyethyl cellulose electrolyte for use in supercapacitor(SpringerOpen, 2015) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.A new borax cross-linked biodegradable solid polymer electrolyte based on hydroxyethyl cellulose and phosphoric acid (H3PO4) was prepared. Characterizations of doped and undoped SPE were done using Fourier transform infrared spectroscopic and electrochemical studies. The ionic conductivity of the films increased with increase in acid concentration and the ionic conductivity obtained at 303 K was 4.1 × 10-3 S cm-1. Furthermore, effects of acid concentration on ionic conductivity and activation energy were discussed. Dielectric studies showed long tail-like feature indicating capacitive nature. A supercapacitor was fabricated and its electrochemical characteristics were studied. The supercapacitor showed a fairly good specific capacitance of 83 F g-1 at 2 mV s-1 and galvanostatic charge-discharge studies showed the mirror-like pattern with 98 % columbic efficiency. Cyclic stability was measured up to 2000 cycles. © 2015 The Author(s).