Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Buckling and Free Vibration Characteristics of a Uniformly Heated Isotropic Cylindrical Panel(Elsevier Ltd, 2016) Bhagat, V.; Jeyaraj, P.; Murigendrappa, S.M.In this paper buckling and free vibration characteristics of an isotropic cylindrical panel subjected to uniform temperature rise has been investigated using finite element method. The procedure involves the determination of critical buckling temperature, which is followed by modal analysis considering pre-stress due to the thermal field in the cylindrical panel. Detailed studies are carried out to analyze the influence of curvature ratio, thickness ratio and aspect ratio on the critical buckling temperature and free vibration behavior of an isotropic cylindrical panel. It has been found that as the curvature ratio and the thickness ratio increases the thermal buckling strength of the cylindrical panel decreases. It has also been found that free vibration frequencies reduce with an increase in temperature and the reduction is more significant for the lowest frequency mode. It is observed that free vibration mode shapes at ambient temperature changes with an increase in temperature. © 2016 The Authors.Item Buckling and Free Vibration Behavior of a Temperature Dependent FG-CNTRC Cylindrical Panel under Thermal Load(Elsevier Ltd, 2018) Bhagat, V.; Jeyaraj, P.; Murigendrappa, S.M.Present study deals with the buckling and free vibration behavior of functionally graded carbon-nanotubes reinforced composite (FG-CNTRC) cylindrical panel exposed to uniform thermal load. Stresses setup due to thermal load and temperature dependent properties influences the buckling and free vibration behavior of the heated structures. Approach employed in the present study consists of static analysis to compute thermal stresses, eigen-value buckling analysis to compute critical buckling temperature and finally modal analysis, taking thermal stresses into account. Influence of different CNTs grading pattern, CNTs volume fraction, geometric parameters, boundary constraints and temperature dependent properties on the buckling strength are investigated. It is observed that hybrid CNTs distribution pattern gives comparatively higher buckling strength and free vibration frequencies. Investigation on free vibration characteristics of the FG-CNTRC panel at elevated temperature signifies that the decline in free vibration frequencies is very drastic at a temperature close to buckling temperature along with temperature dependent properties. c 2017 Elsevier Ltd. All rights reserved. © 2018 Elsevier Ltd.Item Buckling and dynamic characteristics of a laminated cylindrical panel under non-uniform thermal load(Techno Press technop2@chollian.net, 2016) Bhagat, V.; Jeyaraj, J.; Murigendrappa, S.M.Buckling and free vibration behavior of a laminated cylindrical panel exposed to non-uniform thermal load is addressed in the present study. The approach comprises of three portions, in the first portion, heat transfer analysis is carried out to compute the non-uniform temperature fields, whereas second portion consists of static analysis wherein stress fields due to thermal load is obtained, and the last portion consists of buckling and prestressed modal analyzes to capture the critical buckling temperature as well as first five natural frequencies and associated mode shapes. Finite element is used to perform the numerical investigation. The detailed parametric study is carried out to analyze the effect of nature of temperature variation across the panel, laminate sequence and structural boundary constraints on the buckling and free vibration behavior. The relation between the buckling temperature of the panel under uniform temperature field and non-uniform temperature field is established using magnification factor. Among four cases considered in this study for position of heat sources, highest magnification factor is observed at the forefront curved edge of the panel where heat source is placed. It is also observed that thermal buckling strength and buckling mode shapes are highly sensitive to nature of temperature field and the effect is significant for the above-mentioned temperature field. Furthermore, it is also observed that the panel with antisymmetric laminate has better buckling strength. Free vibration frequencies and the associated mode shapes are significantly influenced by the non-uniform temperature variations. © 2016 Techno-Press, Ltd.