Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item A Review of Superconducting Magnetic Bearings and Their Application(Institute of Electrical and Electronics Engineers Inc., 2022) Supreeth, D.K.; Bekinal, S.I.; Shivamurthy, S.R.; Doddamani, M.Magnetic bearings are being researched for high-speed applications, such as flywheel energy storage devices, to eliminate friction losses. As per Earnshaw's theorem, stable levitation cannot be achieved for a static passive magnetic bearing system. Fully passive stable levitation can be achieved with the help of superconducting magnetic bearings (SMB). This article provides an in-depth review of the modeling, analysis, and development of SMB. The different SMB configurations are highlighted, together with essential methodologies for estimating and improving their performance. The advancements in mathematical models used and the optimization of bearing characteristics are thoroughly discussed. Further, key developments in the application of SMB in flywheel energy storage systems are also reviewed. © 2002-2011 IEEE.Item Multi-objective optimization of stacked radial passive magnetic bearing(SAGE Publications Ltd info@sagepub.co.uk, 2018) Lijesh, K.P.; Doddamani, M.; Bekinal, S.I.; Muzakkir, S.M.Modeling, design, and optimization for performances of passive magnetic bearings (PMBs) are indispensable, as they deliver lubrication free, friction less, zero wear, and maintenance-free operations. However, single-layer PMBs has lower load-carrying capacity and stiffness necessitating development of stacked structure PMBs for maximum load and stiffness. Present work is focused on multi-objective optimization of radial PMBs to achieve maximum load-carrying capacity and stiffness in a given volume. Three-dimensional Coulombian equations are utilized for estimating load and stiffness of stacked radial PMBs. Constraints, constants, and bounds for the optimization are extracted from the available literature. Optimization is performed for force and stiffness maximization in the obtained bounds with three PMB configurations, namely (i) mono-layer, (ii) conventional (back to back), and (iii) rotational magnetized direction. The optimum dimensions required for achieving maximum load without compromising stiffness for all three configurations is investigated. For designers ease, equations to estimate the optimized values of load, stiffness, and stacked PMB variables in terms of single-layer PMB are proposed. Finally, the effectiveness of the proposed method is demonstrated by considering the PMB dimensions from the available literature. © IMechE 2017.Item Generalized optimization procedure for rotational magnetized direction permanent magnet thrust bearing configuration(SAGE Publications Ltd info@sagepub.co.uk, 2019) Bekinal, S.I.; Doddamani, M.; Vanarotti, M.; Jana, S.Optimization of rotational magnetized direction permanent magnet thrust bearing configuration is carried out using generalized three-dimensional mathematical model. The bearing features namely axial force and stiffness are maximized using in-house developed mathematical expressions solved using MATLAB. The design variables selected for the optimization are axial offset, number of ring pairs, air gap and inner radius of inner and outer rings. The maximized axial force values of the optimized configuration are validated with the finite element analysis results. To overcome the high computational cost associated with three-dimensional equations, generalized method of optimization is sucessfully demonstrated using plots representing variation of optimal design variables as a function of air gap with respect to bearing’s outer diameter. Simple and useful method of using the generalized plots for the process of optimization is presented by dimension optimization of representative bearing configuration with a particular aspect ratio. The proposed optimization using mathematical model and generalized approach assists designer in selecting optimized geometrical parameters of rotational magnetized direction thrust bearing configurations easily for variety of high-speed applications. © IMechE 2018.Item Improvement in the design calculations of multi-ring permanent magnet thrust bearing(Electromagnetics Academy, 2020) Bekinal, S.I.; Doddamani, M.This article presents the design and optimization of multi-ring permanent magnet thrust bearing (PMTB) with an axial air gap between successive axial stacks. Larger air gap due to the inclusion of conductive materials needs to be critically analysed in permanent magnet bearings with eddy current damper. High conductivity materials can be filled in an axial air gap instead of a radial air gap to increase the required amount of damping. Three-dimensional (3D) mathematical model for load-carrying capacity for the said configuration is presented using the Coulombain model. The significance of an axial air gap between successive ring pairs in the configuration concerning maximization in the bearing characteristics is presented. Variables such as the number of axial stacks, an axial air gap between the successive rings, an inside radius of rotor ring magnets, and an inside radius of stator ring magnets are optimized at different air gap values for maximizing the load-carrying capacity and stiffness. A significant increase in the values of bearing characteristics is observed in the optimized configuration as compared to bearing with a single permanent magnet ring pair. Optimized PMTB with comparable load carrying capacity and stiffness values can be used to replace conventional bearings used in high-speed applications to improve system efficiency. © 2020, Electromagnetics Academy. All rights reserved.