Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Barbhuiya, S.Subject: search.filters.subject.Sustainable development

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Influence of Geopolymerization Factors on Sustainable Production of Pelletized Fly Ash-Based Aggregates Admixed with Bentonite, Lime, and GGBS
    (American Society of Civil Engineers (ASCE), 2023) Sharath, B.P.; Snehal, K.; Das, B.B.; Barbhuiya, S.
    This experimental research investigates the influence of geopolymerization factors such as Na2O dosages, water and mineral admixture [bentonite (BT), burnt lime (BL), and ground granulated blast furnace slag (GGBS)] on physiomechanical properties of the pelletized fly ash (FA)-based aggregates. Taguchi's L9 orthogonal array was adopted to design the mixing ratios for three kinds of fly ash-based aggregates (in the combinations of FA-BT, FA-BL, and FA-GGBS). The degree of geopolymerization of the produced aggregates was characterized using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and a scanning electron microscope (SEM). Most influential response indices in the production of pelletized aggregates were identified using gray relational analysis. The physiomechanical characteristics of the fly-ash aggregates were significantly improved by admixing BL than that of GGBS and BT. However, pelletization efficiency was seen to be superior for GGBS-substituted fly-ash aggregates. The quantified amount of hydration products, i.e., sodium alumino-silicate hydrate (N-A-S-H)/calcium alumino-silicate hydrate (C-A-S-H) for fly ash-based aggregates intensified on increasing Na2O and mineral admixture dosages. The results strongly suggest the existence of a linear relationship between the quantified amount of N-A-S-H/C-A-S-H and individual pellet strength of produced aggregate. The FTIR spectrum showed strong and broadened bands of Si-O terminal for all types of aggregates, representing the conversion of unreacted minerals to chains of aluminosilicate gel (geopolymerized hydration product). Further, it can also be inferred from gray relational analysis that among all other factors, Na2O content significantly impacted the engineering properties of produced fly ash-based aggregates. © 2023 American Society of Civil Engineers.
  • No Thumbnail Available
    Item
    Life Cycle Assessment of construction materials: Methodologies, applications and future directions for sustainable decision-making
    (Elsevier Ltd, 2023) Barbhuiya, S.; Das, B.B.
    This review paper presents a comprehensive analysis of Life Cycle Assessment (LCA) methodologies applied to construction materials. It begins with an introduction highlighting the significance of LCA in the construction industry, followed by an overview of LCA principles, phases and key parameters specific to construction materials. The methodological approaches utilised in LCA, including inventory analysis, impact assessment, normalisation, allocation methods and uncertainty analysis, are discussed in detail. The paper then provides a thorough review of LCA studies on various construction materials, such as cement, concrete, steel and wood, examining their life cycle stages and environmental considerations. The review also explores recent advances in LCA for construction materials, including circular economy principles, renewable alternatives, technological innovations and policy implications. The challenges and future directions in LCA implementation for construction materials are discussed, emphasising the need for data quality, standardisation, social aspects integration and industry-research collaboration. The provides valuable insights for researchers, policymakers and industry professionals to enhance sustainability in the construction sector through informed decision-making based on LCA. © 2023 The Authors
  • No Thumbnail Available
    Item
    Effect of Iron Ore and Copper Ore Tailings on Engineering Properties and Hydration Products of Sustainable Cement Mortar
    (ASTM International, 2024) Sumukh, E.P.; Das, B.B.; Barbhuiya, S.
    The prohibition of river sand mining has drawn the attention of researchers in finding practicable alternatives. In the approach of finding these alternatives, it is essential to ensure minimal or zero impairment to the ecological balance, which can be mainly attained by making use of industrial waste/byproducts. The wastes from the mining industry are the major contributors in causing impairment to the environment, and their influence on the stability of mortars on using as fine aggregates needs to be systematically investigated with the view of long-term performance concerns. Thus, the present study explores the applicability of mine tailings and finding the optimum dosage in cement mortars by investigating the engineering properties and microstructure development with the aid of qualitative and quantitative analysis associated with hydration products. The studies confirm that the increased consumption of portlandite for secondary hydration reactions followed by the additional formation of calcium silicate hydrate (CSH) and calcium aluminum silicate hydrate (CASH) phases in mine tailing-based mortars helped in achieving a quality microstructure. These additional formations of CSH and CASH phases are also confirmed through Fourier transform infrared spectroscopy by identifying the shift of Si-O-Si stretching vibration bands toward a lower wavenumber. The lowering of calcium/silicate atomic ratio and increased formation of mineralogical compounds related to CSH and CASH in x-ray diffraction patterns also confirms the same. Gismondine, chabazite, and hillebrandite are the additional phases formed and found to take part in refining the pore structure. This enhanced performance of mine tailing mortars was also verified with the aid of a modified Andreasen and Andersen particle packing model. The formation of high-quality microstructure is reflected in the hardened properties of optimized cement mortar in the proportion of 20 % for iron ore tailing and 30 % for copper ore tailing. © © 2024 by ASTM International.
  • No Thumbnail Available
    Item
    Advances and perspectives in engineered cementitious composites: a comprehensive review
    (ICE Publishing, 2024) Barbhuiya, S.; Adak, D.; Das, B.B.
    Engineered cementitious composites (ECCs) have garnered significant attention within the construction industry, owing to their exceptional mechanical properties and durability. This thorough review presents a meticulous analysis of the progress and prospects in ECC research. It begins by introducing the background and rationale for investigating ECCs, while outlining the objectives of the review. The review provides an encompassing overview of ECCs, encompassing their definition, characteristics, historical development, composition and constituent materials. Emphasis is placed on the examination of ECCs' mechanical properties, specifically their flexural behaviour, tensile behaviour, compressive strength and resistance to environmental factors. Furthermore, the rheological properties of ECCs, including workability, flowability, self-healing, crack mitigation, viscosity and thixotropy, are discussed in detail. The review delves into the influence of fibre reinforcement on ECCs, encompassing the types of fibres utilised and their impact on mechanical and structural properties, as well as fibre dispersion and orientation. Additionally, it explores the diverse applications of ECCs across various fields, such as structural applications and sustainable building practices. The challenges and limitations associated with ECCs, such as cost and availability, are addressed, alongside an exploration of future trends and research directions. © 2024 ICE Publishing. All rights reserved.
  • No Thumbnail Available
    Item
    Biochar-concrete: A comprehensive review of properties, production and sustainability
    (Elsevier Ltd, 2024) Barbhuiya, S.; Das, B.B.; Kanavaris, F.
    The utilisation of biochar in concrete has attracted considerable attention due to its potential in enhancing the properties and sustainability of this construction material. This in-depth review delves into various aspects of biochar-concrete composites. It commences by defining biochar and exploring its production methods, physical and chemical properties. Additionally, the review provides an overview of concrete, emphasising its composition, properties and the challenges associated with traditional production methods. The incorporation of biochar in concrete brings forth several benefits, such as improved strength and durability, enhanced thermal properties and the potential for carbon sequestration. The paper examines the production process of biochar-concrete composites, covering aspects like incorporation methods, biochar selection, mixing techniques and quality control measures. Furthermore, the sustainability aspects of biochar-concrete are evaluated, considering its environmental impact, life cycle assessment, carbon footprint reduction and economic feasibility. The review also addresses the challenges and future perspectives of biochar-concrete composites, along with opportunities for research and development. This comprehensive review presents valuable insights into the properties, production and sustainability of biochar-concrete composites. It serves as a guide for further advancements in the realm of sustainable construction. © 2024 The Authors