Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item A comprehensive review on the use of hemp in concrete(Elsevier Ltd, 2022) Barbhuiya, S.; Das, B.B.A simple mixture of hemp hurd, water, and lime is used to make hemp concrete. It is indeed one of the few materials that can continue to absorb carbon after being employed in construction, storing more carbon in the atmosphere over the building's lifetime than was emitted during construction. Furthermore, hemp can be harvested in as little as 60 days. Hemp concrete is a “carbon-negative” or “better-than-zero-carbon” substance because the hemp plant absorbs more carbon from the atmosphere than it emits during its production and application on site. It is a bio-composite material that can be utilised as an alternative to concrete and standard insulation in building. Hemp concrete is also recyclable at the end of the building's lifespan. This study summarises the fast-developing body of knowledge about hemp concrete, which was recently developed. © 2022 Elsevier LtdItem Synergistic effect of nano silica on carbonation resistance of multi-blended cementitious mortar(Elsevier Ltd, 2023) Snehal, K.; Das, B.B.; Barbhuiya, S.Confiscation of alkaline buffer in a blended cementitious system surges the risk of carbonation. Understanding the carbonation mechanism and kinetics of multi-blended cementitious systems in correspondence to microstructural properties is the need of the hour. In this context, the change in the microstructure of binary, ternary, and quaternary blended cementitious mortar mix comprising of fly ash or/and ultra-fine fly ash or/and nano-silica upon accelerated carbonation (3.5% CO2; 70% RH) was studied. All multi-blended mixes were proportioned using modified Andreasen and Andersen particle packing theory. Permeable porosity and carbonation parameters such as carbonation depth, rate of change in compressive strength, and carbonation shrinkage were measured. Further, qualitative/quantitative estimation of carbonation phases was done using characterization techniques such as TGA and FTIR. In control mix with solely OPC, the reaction of CO2 with calcium-bearing phases showed chemo-mechanical changes leading to 18% improvement in strength at 30 days of exposure. The optimized multi-blended cementitious systems with nano-silica exhibited higher resistance to carbonation kinetics. Phase assemblages quantified through TGA within depth of carbonation imply a negligible concentration of portlandite (CH). However, mixes without nano-silica exhibited a significant reduction in bound water content associated with C–S–H/AFt/AFm phases and intensified the precipitation of calcium carbonate (CaCO3) phase. Asymmetric stretching band of C–O–C at 1424 cm−1 corresponding to calcite phase measured using FTIR validates the outcomes of TGA. © 2023 Elsevier LtdItem Influence of multi-stage processing and mechano-chemical treatments on the hydration and microstructure properties of recycled aggregate concrete(Elsevier Ltd, 2023) Trivedi, S.S.; Sarangi, D.; Das, B.B.; Barbhuiya, S.On account of the shortage of naturally occurring coarse aggregate, recycled aggregate (RA) made from crushed concrete debris is now used in the construction industry. With this rise in the utilisation of recycled aggregate in the construction sector, there has been extensive research into ways to improve its quality. The significant fraction of mortar remains that are left on the RA surface is the primary factor that affects its quality. Concrete made from RA loses strength and mechanical performance due to the attached mortar's increased porosity and water absorption values and the frailer transition region between the new mortar and aggregates. In order to minimise the old cement fractions and increase the quality, this paper studies the effect of concrete incorporating multi-stage processed RA from demolished concrete waste, followed by treatment with mechanical abrasion and sodium silicate immersion. The recycled aggregates were produced through multi-stage jaw crushing, followed by utilising natural aggregate, recycled aggregate, and recycled aggregate obtained after mechanical abrasion, followed by sodium silicate treatment for concrete mix design at various substitution percentages as coarse aggregates. The experimental investigation further progresses with the evaluation of mechanical and durability properties of concrete mixes, which is additionally followed by microstructural studies such as scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Thermogravimetry-differential thermal analysis (TG-DTA). The outcomes demonstrate that two-stage treatment, such as mechanical abrasion followed by sodium silicate immersion, yields superior-quality RA. Recycled aggregate concrete (RAC) made with these treated aggregates illustrated an increase in workability and density with respect to an untreated RAC mix. Furthermore, comparable strengths in compression, flexure, and tension are found in treated RAC mixes, particularly at 35% replacement levels, with respect to concrete mixes comprised of natural aggregates. A similar trend is detected in the chloride penetration tests and water sorptivity tests. In addition, the microstructural investigation confirmed the formation of additional calcium silicate hydrate for treated RAC mixes, particularly for the 35% substituted RA mix. On the basis of the results, it is suggested that multi-stage jaw crushing followed by treatment through mechanical abrasion and sodium silicate can potentially enhance the mechanical, microstructural, and durability performance of RAC. © 2023 Elsevier LtdItem Advances and perspectives in engineered cementitious composites: a comprehensive review(ICE Publishing, 2024) Barbhuiya, S.; Adak, D.; Das, B.B.Engineered cementitious composites (ECCs) have garnered significant attention within the construction industry, owing to their exceptional mechanical properties and durability. This thorough review presents a meticulous analysis of the progress and prospects in ECC research. It begins by introducing the background and rationale for investigating ECCs, while outlining the objectives of the review. The review provides an encompassing overview of ECCs, encompassing their definition, characteristics, historical development, composition and constituent materials. Emphasis is placed on the examination of ECCs' mechanical properties, specifically their flexural behaviour, tensile behaviour, compressive strength and resistance to environmental factors. Furthermore, the rheological properties of ECCs, including workability, flowability, self-healing, crack mitigation, viscosity and thixotropy, are discussed in detail. The review delves into the influence of fibre reinforcement on ECCs, encompassing the types of fibres utilised and their impact on mechanical and structural properties, as well as fibre dispersion and orientation. Additionally, it explores the diverse applications of ECCs across various fields, such as structural applications and sustainable building practices. The challenges and limitations associated with ECCs, such as cost and availability, are addressed, alongside an exploration of future trends and research directions. © 2024 ICE Publishing. All rights reserved.Item Synergy of Hydration and Microstructural Properties of Sustainable Cement Mortar Supplemented with Industrial By-Products(Springer Science and Business Media Deutschland GmbH, 2024) Sumukh, E.P.; Das, B.B.; Barbhuiya, S.The present research assists in resolving the issues allied with the disposal of industrial solid wastes/industrial by-products (IBPs) by developing sustainable IBPs based cement mortars. The applicability of IBPs as a feasible alternative to river sand in cement mortar has been evaluated by investigating the synergy among the ingredients, resulting engineering properties and microstructural developments at early and late curing ages. The study could effectively substitute 30% volume of river sand with bottom ash and 50% in the case of slag sand mortars. The experimental outcomes disclose that the practice of IBPs as fine aggregate enhances the engineering properties of mortar and the optimum replacement level lies at 10% and 40% usage of bottom ash and slag sand, respectively. The advanced characterization studies and particle packing density illustrate the refinement of pores by void filing action and accumulation of additional hydration products through secondary hydration reactions. The consumption of portlandite followed by increased hydration products formation observed through thermogravimetric analysis, X-ray diffraction analysis and energy dispersive X-ray spectroscopy that confirmed the contribution of finer fractions of IBPs to secondary hydration reactions. This constructive development was also observed from the lowering of wavenumber corresponding to Si–O–Si/Al vibration bands in Fourier transform infrared spectroscopy spectra. The improved microstructure resulted in enhancing the compressive strength by 9.01% and 18.18% in optimized bottom ash and slag sand mortars, respectively at the curing age of 120 days. Similarly, the water absorption reduced by 1.03% and 1.24% in bottom ash and slag sand mortars, respectively. © The Author(s), under exclusive licence to the Iran University of Science and Technology 2024.Item Mechanical performance of bio-based materials in structural applications: A comprehensive review(Elsevier Ltd, 2025) Barbhuiya, S.; Das, B.B.; Kapoor, K.; Das, A.; Katare, V.The pursuit of sustainable materials in construction has led to increased interest in bio-based materials for structural applications. This review paper examines the mechanical performance of structural members made from bio-based materials, including natural fibres, bio-based polymers, and engineered wood products. Key mechanical properties such as tensile, compressive, and flexural strength, as well as durability under environmental stressors, are analyzed to understand their suitability for load-bearing applications. The paper also discusses factors affecting mechanical behaviour, including moisture absorption, temperature sensitivity, and fabrication techniques. A comparative analysis highlights the performance of bio-based materials against conventional materials like steel and concrete, emphasizing both their strengths and limitations. Enhancements in bio-based composites, including hybridization and nanotechnology, are reviewed for their potential to improve mechanical robustness. Additionally, sustainability aspects, such as life cycle assessment and end-of-life biodegradability, are evaluated to underscore the environmental benefits of bio-based structural members. The paper concludes with future research directions, advocating for innovation in bio-based material technology to meet structural demands and support the construction industry's shift toward greener practices. This review aims to provide a foundational understanding for engineers and researchers seeking to integrate bio-based materials into sustainable structural designs. © 2025 The Authors