Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
Search Results
Item A Markov Chain Monte Carlo-Metropolis Hastings Approach for the Simultaneous Estimation of Heat Generation and Heat Transfer Coefficient from a Teflon Cylinder(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2018) Kumar, H.; Kumar, S.; Gnanasekaran, N.; Balaji, C.This paper reports the use of Markov Chain Monte Carlo (MCMC) and Metropolis Hastings (MH) approach, to solve an inverse heat transfer problem. Three-dimensional, steady state, conjugate heat transfer from a Teflon cylinder of dimensions 100 mm diameter and 100 mm length with uniform volumetric internal heat generation is considered. The goal is to estimate volumetric heat generation and heat transfer coefficient, given the temperature data at certain fixed location on the surface of the cylinder. The internal volumetric heat generation is specified as input and the temperature and heat transfer coefficient values are obtained by a numerical solution to the governing equation. The temperature values also depend on heat transfer coefficient which is obtained by solving Navier–Stokes equation to obtain flow information. In order to reduce the computational cost, a neural network is trained from the computational fluid dynamics simulations. This is posed as an inverse problem wherein volumetric heat generation and heat transfer coefficient are unknown but the temperature data is known by conducting experiments. The novelty of the paper is the simultaneous determination of volumetric heat generation and heat transfer coefficient for the experimentally measured steady-state temperatures from a Teflon cylinder using MCMC-MH as an inverse model in a Bayesian framework and finally, the estimates are reported in terms of mean, maximum a posteriori, and the standard deviation which is the uncertainty associated with the estimated parameters. © 2018 Taylor & Francis Group, LLC.Item A combined ANN-GA and experimental based technique for the estimation of the unknown heat flux for a conjugate heat transfer problem(Springer Verlag service@springer.de, 2018) Kumar, M.K.; Vishweshwara, P.S.; Gnanasekaran, N.; Balaji, C.The major objectives in the design of thermal systems are obtaining the information about thermophysical, transport and boundary properties. The main purpose of this paper is to estimate the unknown heat flux at the surface of a solid body. A constant area mild steel fin is considered and the base is subjected to constant heat flux. During heating, natural convection heat transfer occurs from the fin to ambient. The direct solution, which is the forward problem, is developed as a conjugate heat transfer problem from the fin and the steady state temperature distribution is recorded for any assumed heat flux. In order to model the natural convection heat transfer from the fin, an extended domain is created near the fin geometry and air is specified as a fluid medium and Navier Stokes equation is solved by incorporating the Boussinesq approximation. The computational time involved in executing the forward model is then reduced by developing a neural network (NN) between heat flux values and temperatures based on back propagation algorithm. The conjugate heat transfer NN model is now coupled with Genetic algorithm (GA) for the solution of the inverse problem. Initially, GA is applied to the pure surrogate data, the results are then used as input to the Levenberg- Marquardt method and such hybridization is proven to result in accurate estimation of the unknown heat flux. The hybrid method is then applied for the experimental temperature to estimate the unknown heat flux. A satisfactory agreement between the estimated and actual heat flux is achieved by incorporating the hybrid method. © 2018, Springer-Verlag GmbH Germany, part of Springer Nature.